-
<>2. We unscrew the water inlet pipe from the washing machine, and we can see the water inlet valve of the washing machine. Depending on the washing machine, there is also a difference in the part where this tube is connected. The blue protrusions are the filters, and we need to use pliers.
Drag it down. <>
3. As shown in the figure below, we can have a lot of soil and other impurities on the filter. Just use an old toothbrush or shoe brush to brush it gently.
4. Brush the clean filter and then put it in the water inlet valve. Then put the water pipes in the connection. That's it.
-
The LG drum washing machine used in our dormitory was just cleaned yesterday, and in the lower right corner of the front, a door, pried open with a coin or key, and I saw a black knob, and it was unscrewed. Be aware that water will flow out when you unscrew it!
-
In the lower right corner of the front, a door, pried open with a coin or key, you see a black knob, unscrew it. Be aware that water will flow out when you unscrew it!
-
Open the small door in the lower right corner of the washing machine, first put the water clean through the small black hose on the left side, and then twist the big black knob on the right side, and it is OK to unscrew it for cleaning Note that you must put the water first and then unscrew the big black knob).
-
It should be easy to find, underneath, I don't know what model your LG front-loading washing machine is, so I'm not sure there.
-
The filter of the drum washing machine is opened in the following way:
1. First unplug the power plug of the washing machine, and then find the cover of the filter and sell the plate, usually in the lower right corner of the washing machine.
2. Then use a screwdriver to insert the square hole of the cover, open the cover, and you can see the filter screen of the drum washing machine after opening.
3. Then rotate the filter clockwise, take out the filter, and the filter of the drum washing machine will open.
Drum washing machine
The drum washing machine originated in Europe, and the washing method is designed to imitate the principle of beating clothes with a stick hammer. The stainless steel inner barrel, the mechanical program controller is tightly closed, the shell is triple protected by phosphating, electrophoresis and spraying, and a number of bulky cement blocks are used to balance the huge centrifugal force generated when the drum rotates to do repetitive movements, plus the combined action of washing powder and water to wash the clothes.
The drum washing machine is controlled by a microcomputer, the clothes are not entangled, the washing is uniform, and the wear rate is 10% smaller than that of the wave car bucket bridge wheel washing machine, which can wash cashmere, wool, silk and other clothes to achieve comprehensive washing. It can also be heated to fully dissolve the laundry detergent and give full play to the decontamination effect of the laundry detergent. It can form a highly concentrated laundry detergent in the bucket, bringing the ideal washing effect while saving water.
Although the drum washing machine has gone through 80 years of development, it has not changed much in structure, basically it is a stainless steel inner cylinder, and a mechanical program controller is used. The shell has undergone a triple treatment process of phosphating, electrophoresis and painting, and its service life can reach 15 years, which is much higher than the service life of the wave wheel of plastic parts.
-
Summary:Open the filter screen of the drum washing machine, and the specific operation steps are as follows: 1. Use a screwdriver or iron sheet to pry the baffle below.
2. Pull out the water pipe, drain the sewage inside, and then put it back on. 3. Unscrew off the small lid and clean it. The inside of this small lid is the filter, and the hair, coins, toilet paper and other debris in the washing machine will accumulate in it.
4. After cleaning, install it back again.
Demo Environment Information:Brand model: Midea washing machine MG100V70WD5.
Open the filter of the drum washing machine, and the specific operation steps are as follows:
1. Use a screwdriver or iron sheet to pry the baffle below. The specific operation is shown in the following figure: <>
2. Pull out the water pipe, drain the sewage inside, and then put it back on. The specific operation is shown in the following figure: <>
3. Unscrew off the small lid and clean it. The inside of this small lid is the filter, and the hair, coins, toilet paper and other debris in the washing machine will accumulate in it. The specific operation is shown in the following figure: <>
4. After cleaning, install it back again. The specific operation is shown in the following figure: <>
-
The filter of the drum washing machine is in the filter in the lower right corner. There are two kinds of drum washing machine filters, one of which is located at the balance ring of the inner barrel and is shaped in a square frame. Pinch the filter slot with your fingers, then pull it up to remove it, remove the internal organs of the filter, then rinse it with water, and then reload it and press down against the notch.
The second type of filter is located in the middle of the inner barrel, which is vertical, and you only need to press down on the plastic card slot above the filter with your thumb and take it outward. Pay attention to the reloading of the upper and lower sides when reloading, so as not to take the filter and not be able to carry it. The filter screen is mainly used to collect hair, debris, dirt, etc. on the clothes, and the filter screen of the drum washing machine needs to be cleaned regularly to ensure the normal operation of the washing machine.
Therefore, it is very important to clean the filter of the drum washing machine regularly. How to clean the washing machine 1, the washing machine after a long period of use, although it looks clean on the outside, but the washing machine drum is very dirty, add bleach in the washing machine, and then put water to wash for about half an hour, the stolen goods in the washing machine can be washed. 2. Use a cleaning agent specially for cleaning the washing machine, add the cleaning agent to the washing machine, and the proportion of water should be appropriate, and then repeat the washing state twice, you can clean the oil in the washing machine.
-
What should I do if the filter of the drum washing machine cannot be opened? Generally speaking, the filter located inside the drum bend Chunxin washing machine can be easily disassembled and taken out, only the filter outside the washing machine is more difficult to hold. If you can't take it out, you should disconnect the power supply of the drum washing machine and unplug it, and then pry open the small door panel of the lower right corner of the washing machine with a small bent pure letter iron sheet buried wheel or screwdriver, and finally rotate the small round buried wheel-shaped cover counterclockwise, and you can easily take out the filter.
Buy a Siemens front-loading washing machine!
The drum washing machine is hung high drainage, no matter how far away it can drain water. The original water inlet pipe and drainage pipe are one meter and two long. But you can all lengthen it as needed. >>>More
Which is better, a washing machine or a drum washing machine?
Midea drum washing machine.
There are a lot of small blackheads in the inlet sink. >>>More
Advantages: No damage to clothing.
Disadvantages: not clean, waste water and electricity. >>>More
Reasons why the washing machine can't put water in and how to deal with it: >>>More