What are the circumstances that you will encounter when you need to format the hard drive 5

Formatting a hard disk is the work of initializing a newly purchased hard disk or a hard disk with bad sectors, so that we can record data on the disk in a step-by-step manner.

Only the formatted hard disk can be recognized by the computer, and it can be partitioned, and then the hard disk can be used to install the operating system and store files.

If you don't format the hard drive, the hard drive will become a piece of scrap metal.

In addition, purposefully formatting a hard disk with bad sectors can effectively hide the bad sectors and make the hard disk usable.

You can also use formatting to kill the virus, but all the files on the hard drive are gone. Hehe.

There are two ways to format a hard drive.

One is low-level and the other is high-level.

Low grid is a dangerous operation suitable for advanced computer workers.

Let's talk about Gog. It is a logical formatting operation on the hard disk.

Gog can be done under Windows or DOC. Usually we have to do it in doc.

After formatting, all the data on the partition is gone.

Under Windows, on the hard partition, right-click on D, E, F, G, and then select Format, tick in front of the fast grid, and it will be completed in a while.

Under the doc, you need to have a disc of XPGognifer, first set your computer in the BIOS as the first boot item to boot the optical drive.

Put the disc into the CD-ROM drive, restart the computer, and select DOC from the menu that appears

Then enter. format c: s q [c is the drive letter, if you want to format that partition, write that such as d:, e:, etc.].

s is the transfer system file].

q is a quick format, be sure to write this parameter, otherwise if the partition is large.

You'll be impatient]

Then there will be a string of English asking you yes or no, and you type y

Then whatever comes out you press enter.

However, if there is no major event, don't format the C drive, because after formatting, you will have to reinstall the system again.

1. When it is first installed, it is formatted due to partitioning.

2. When reinstalling the machine, it will be formatted.

3. When you don't want the data in the disk.

4. If you want to completely erase the data, you may need to format it at a low level.

The hard drive or partition table that I bought has been severely damaged

If you buy a new hard drive, you may need to format the hard drive if you feel that there are viruses, Trojans, or too many junk files.

Do I need to format the hard drive for the first time?

The first statement:

There is no requirement that the portable hard drive must be formatted for the first time.

Generally, storage devices such as mobile hard disks or USB flash drives sold by the factory have been formatted and can be used directly.

However, since it is not certain whether the newly purchased device has been used and tested before, and whether there are any insecure files in it, it is necessary to format the new device.

The second way of saying:

There is no requirement that the portable hard drive must be formatted for the first time.

Generally, storage devices such as mobile hard disks or USB flash drives sold by the factory have been formatted and can be used directly.

However, since it is not certain whether the newly purchased device has been used and tested before, and whether there are any insecure files in it, it is necessary to format the new device.

Make a boot disk.

Run the ** program, insert a floppy disk into the floppy drive, then run the program, click the "Create Tool Disk" button in the main interface of the program, and you can generate a tool disk for detecting the bad sectors of the hard disk.

Note: For the time being, the software can only generate tool disks on floppy disks, so you must have a floppy drive before using it.

Detect the hard drive. Start the computer, press the DEL key to enter the BIOS settings, set the "First Boot Device" option to floppy in the "Advanced BIOS Features", change the first boot disk to a floppy, save the BIOS settings, and restart the computer. Then use the toolpad you just created to boot the system, and the program will be automatically executed when it starts.

If only one hard drive is installed in the system, then position the cursor over the "Full Disk Detection" option and press enter to start a full scan of the hard drive. When the scan is finished, you can see the relevant bad sector information.

If there are multiple hard disks installed in the system, you can select the "Advanced Detection of Hard Disks" option in the main interface, after entering the advanced detection screen, first enter "0" at the "Start Position", press Enter, then enter "100" at the "End Position", press Enter and enter the serial number of the hard disk to be detected in the "Current Hard Disk", for example, enter "2" to detect the second hard disk, and press Enter to start the detection.

Fix the hard disk logical bad sectors.

For hard disks, the repair of logical bad sectors is relatively simple, and when the software detects that there are bad sectors on the hard disk, the bad sectors must first be treated as logical bad sectors, and if the bad sectors still exist, they will be repaired by repairing the physical bad sectors.

Fix the physical bad sectors of the hard disk.

For the physical bad sector, ordinary users can't fix it at all, the only thing we can do is to use some disk software to divide it into a separate area and hide it, so that the head no longer reads it, which can extend the life of the hard disk to a certain extent. It should be emphasized that when using a hard disk with bad sectors, you must always do a good job of backing up your data, because after a bad sector appears on the hard disk, more bad sectors will follow.