I want to know how to install a water softener?

1.The installation surface of the water softener should be firm and sturdy, and its bearing capacity should not be less than twice the weight of the water softener, and at least not less than 80kg. At the same time, the installation pipeline layout, noise, ambient temperature and other requirements of the water softener should be considered.

2.Measure tap water pressure, suitable range: Use a pressure gauge to measure the pressure of the tap water, and if it is lower or higher than the specified pressure, a booster pump or pressure reducing valve needs to be installed to ensure the normal operation of the equipment.

3.Detect the hardness of raw water, measure the PPM value of raw water with a TDS pen, or monitor the hardness of water quality by other means.

4.Installation of overflow pipes and drain pipes.

The overflow and sewage nozzle should leave a 10cm gap above the sewage pipe or floor drain, and do not directly insert the overflow and sewage pipe into the sewer pipe or floor drain to produce a siphon phenomenon, and the sewage is sucked into the water softener and cause damage.

5.Piping installation.

First, the gasket is fitted into the two bellows interfaces; The bellows are tightened at the inlet and outlet of the water pipeline bypass system, and the connection height of the other two ports of the bellows is adjusted with the inlet and outlet of the bypass valve of the water softener. Insert the gasket, connect it to the inlet and outlet of the bypass valve of the water softener, tighten it and connect the bypass valve.

6.Move the water softener to a suitable position, secure the device, and connect the power supply.

7.Parameter settings (display panel interface).

The control valve used in the water softener product is set in the front and back mode: the front desk mode is suitable for the user, sets the current time, the regeneration initiation time (the default value is 2:00), the raw water hardness value input (the hardness value measured in step 3) and displays the operating water supply and other parameters.

The background mode setting does not need to be set by the user himself.

8.The water softener is debugged, the resin tank air is emptied, and the resin is rinsed until there is no black water and yellow water flows out.

9.Add special salt for regeneration to the salt tank, and prohibit the use of salts containing additives or coarse salts with large crystalline particles. The salt surface should reach the height of the salt box above 2 3 (do not exceed the height of the overflow port), and add the required amount of saturated salt water at one time.

First, you can follow the instructions to install it.

Second, you can find an installation company and pay some money to help you install.

The installation of the water softener is generally connected by a PPR heat melt pipe, and the salt box and the resin tank of the water softener are connected by a software PE pipe. Generally, salt is added to two-thirds of the salt box.

It is recommended that the installation should be carried out by professional personnel, and the amount of salt is about one-third of the salt bucket, and then the water softener will automatically fill the water and dilute it, and you can solve it if you are in Beijing.

Drain pipe outlet pipe floor drain power jack screen adjustment The key is to be smooth The installation is also more troublesome. Split salt boxes are best placed within 1 meter of the machine, which helps to make use of the machine itself. There is no specific amount of salt to be added, but it is important not to go without salt.

The installation of this should be done by the manufacturer.

After installation, it is necessary to debug.

If it is in Henan, our Midea Henan sales and service center can do it.

Our water softeners are all directly installed by workers.

It is important to know that soft water and tap water are very different in terms of taste and feel. So, nowadays, more and more people are using water softeners at home so that you can drink healthier and tastier water. However, some people find that the water softener is not installed at home, before installing, let's take a look at the installation of the household water softener.

Next, it's up to us to bring it to youWater softener installationLet's find out the steps together.

Household water softener installation steps:

1.When importing the water softener, ask the owner to confirm whether the machine is in good condition. When the standard product water softener is delivered, the source leaks, and the strap on the outer packaging is fastened with a plastic buckle.

2.After opening the package, the installer will explain the functional characteristics of some products to the owner, so that the owner knows how to handle the water and use it with confidence.

3.Connect the water inlet pipe of the water purifier. Since the household water purifier and water softener are installed together, the water pipe is divided into two roads, which are connected to the water softener for soft water.

4.Temporarily connect the water pipe next to the water purifier to drain the sewage that needs to be removed when flushing the inside of the water purifier. Because it's a new machine, there are some residual impurities in it that can be easily overlooked.

5.Generally, the water softener can be set to flush every 12 hours on the computer board for about 30 seconds each time, but when it is debugged, because it is a new machine, it needs to be cleaned for about half an hour.

6.Clean the nozzle of the water softener into the socket. Because the water pipes are installed first, there will inevitably be some dust outside. If it's not a regular installation team, it's usually overlooked.

7.It is worth mentioning that the installer should use white tape to wrap several times around the connection of each nozzle, paying attention to leakage and bacteria.

8.When debugging a water softener, first turn the computer screen on the machine. Because of the fear that it will be broken during shipping, it will be turned upside down at the time of delivery. The location of the connection between the computer screen and the fuselage is active and does not affect the normal use of the machine.

9.Once the water softener is installed, pour salt into it. The salt used in the water softener is a special salt that is imported. The damage to the machine and water quality is relatively small, and the shape is a bit like a cockroach pill.

The water softener is most suitable for installation.

Kitchen installation. The water softener is installed in the kitchen. The most desirable location is a cupboard basin.

This is by far the most common installation plan. However, this solution has certain requirements for the size of the water softener. It is advisable to give preference to splitting machines.

A machine usually needs to be individually designed to store the cabinets. Consumers can also easily choose kitchens and cabinets with sizes and inches. If it is installed outside the cabinet or as a cabinet alone, the cost is also high, and it is also necessary to consider the pipe orientation of the water pipe, the return pipe, the sewage pipe (the pipe is always inconvenient).

Bathroom installation. The footprint of the enclosure is usually small. There is very little space available for basic decorations.

The volume of water softeners on the market is relatively large. Therefore, it is best to install a split water softener in the bathroom. Ideal if it is installed in a washbasin cabinet.

Otherwise, bare metal installation becomes a must, but you can also consider hanging it on the wall (a bit of a ** view).

Tap water contains some unhealthy substances to the body, such as chloride ions, bleaching powder, etc., the water softener can just remove the calcium and magnesium ions in the tap water, and can also reduce the hardness of the water. Let's take a look.

1. Household water softener - installation.

1. When the water softener is delivered, we should first confirm the situation of the water softener to see if the machine is intact.

2. After the package is opened, the installer will give us some explanations to tell us what functions the bulldozing has, so that consumers can know how the water is processed, so that consumers can rest assured that they can use it.

3. Connect the water inlet pipe on the water purifier, because the water purifier and the water softener are installed together, so the water pipe will be divided into two ways, which are connected to the water purifier and the water softener respectively.

4. There will be a water connection pipe next to the water purifier, which is used to release the sewage discharged from the inside of the water purifier, and the new machine will have the previous residual impurities that are easy to be ignored.

5. The water softener should be set to flush every 12 hours, and the time of each flushing should be about 30 seconds, and the first flushing time of the new machine should be designed to be about 30 seconds.

6. The water pipe has been installed in advance, and we should clean it once, because it will inevitably be loaded with dust, if it is not a regular installation team, this will usually be forgotten. If you see the installers wrapping their white feet around the joints between the gates, they are doing a lot of leak prevention and sterilization measures.

7. When the water softener is debugged, the display screen on the machine should be turned in a different direction, so that it can avoid being damaged during transportation, so it is extremely reversed when it is sent, and the body linking the display screen is flexible and will not affect the use of the machine.

8. After the water softener is installed, some salt should be poured into it, the salt used in the water softener is imported for special use, and the damage to the machine and water quality is very small.

2. Household water softener.

1. Honeywell.

Founded in 1885, it is a leader in diversified manufacturing technologies whose purpose is to achieve mutually beneficial growth by increasing comfort, productivity, energy saving, protecting the environment and protecting the lives and property of users, satisfying customers and striving to become the world's pioneer in self-control.

2. Midea

Founded in 1968, it now has more than 200 subsidiaries, their mission is to create a better life for consumption, Midea was established for so many years, has been loved by many consumers, can be said to be the most used household appliance brand.

1. First of all, prevent water pipes, water heaters, coffee machines, humidifiers, steam irons, bathtubs, shower heads, flush toilets and other household appliances from accumulating scale, frequent blockage, low thermal efficiency and other phenomena.

2. Effectively inhibit fungi, promote the healing of skin invasion trauma, and reduce the incidence of constipation, gastrointestinal and stone diseases. In the event of an accident such as skin trauma, frostbite, burns, etc., wash the affected area with soft water, soak cotton wool, gauze, towel, etc., and gently rub the affected area, which can quickly heal the wound and make the swelling caused by the burn disappear immediately, because the soft water has the effect of promoting the regeneration of cells and tissues. It can effectively inhibit fungi and promote the regeneration of cell tissues.

In the event of skin trauma, frostbite, burns and other accidents, washing with soft water can quickly heal the wound.

3. Laundry, prevent static electricity, decolorization, deformation, clean tableware, clean without water stains, and improve the gloss of holding utensils. Clean the kitchen and bathroom, and remove stains and odors strongly. It has strong detergency. Soft water washes the clothing fibers, which will not be hard and brittle, saving washing supplies.

4. Soft water fundamentally eliminates water alkali, makes the equipment run safely, saves expenses, reduces the maintenance cost of water equipment and water pipelines by more than 60%, reduces the cost of hot water fuel by more than 30%, and reduces the purchase cost of detergent by more than 50%.

<><Why install a water softenerIn good shape. Compared with tap water, soft water has a very obvious and hand feel, soft water has high oxygen content and low hardness, which can effectively prevent stone disease, reduce the burden on the heart and kidneys, and be beneficial to health. Soft water bathing, shampooing, and face washing, smooth and delicate, especially protective for infants and young children, can make the investment in beauty, hairdressing, and skin care achieve twice the result with half the effort.

Labor-saving washing. Soft water laundry is clean, fluffy, showy, no residual washing and taste, and the life of the clothes can be extended by more than 15%. Soft water washing tableware and tea sets are crystal clear, and basins and bathtubs are not stained, which can save a lot of detergent and save a lot of effort.

Remove limescale. The water softener mainly solves the scale problem caused by hard water, and is a softened water equipment for removing water alkali, which uses the principle of ion exchange to remove the hardness (water alkali) of more than 99%, and can comprehensively soften all the water in the whole family. The use of water softeners can make other household water cleaning equipment (wall-hung boilers, radiators, water heaters, solar energy, etc.) never scale and clog, and have a longer service life, minimize the maintenance costs of water equipment and water pipelines, fuel costs, and detergent purchase costs, and eliminate potential safety hazards and equipment losses caused by scale.

Bathroom facilities (glass bath room, mirror, bathtub, toilet, etc.) use soft water, less scaling, and can be kept bright and white for a long time.

<>Tips: Due to the large number of users who plan to purchase, install and use household water treatment equipment such as water softeners, water purifiers, and water purifiers. A brief explanation is given on the selection of equipment in the early stage, the preparation before installation, and the use after installation.

1.The selection of water treatment equipment must be based on the actual situation of your own home. Choose the right water treatment product for your use.

2.The preparation before installation is best before the hydropower renovation and cabinet measurement design, and the engineer comes to the door to design. According to the model of the product, select the appropriate installation location.

Leave a power supply nearby, and it is best to have a floor drain if the environment allows. Do waterproofing nearby. So as not to be in the water and electricity renovation, cabinet safety travel after the installation.

The on-site space is too small to install a water softener, which will bring unnecessary trouble and waste to your decoration. (Mainly for the integrated American Eco water softener, the installation problem of domestic water softener is generally not very large).

3.In order to ensure the quality of the water softener and its future use, after installation, you must read the product manual in detail if you have time. Pay attention to the working condition of the equipment.

Preparations should be made for the installation of household water softeners.

1. Installation location. First of all, it is necessary to make it clear that the water softener is installed behind the main water meter and connected to the main waterway to improve the use of water for all households (not partially). Usually one meter per household, but there will also be special double tables or even multiple meters, which requires technicians to formulate the best plan after specific investigation.

2. Installation conditions: depending on the equipment model you choose. Most of them can be divided into two situations, one is a fully automatic water softener, which needs to have a power supply and floor drain;The second is a semi-automatic water softener, which only needs to be equipped with a floor drain because it does not use electricity.

3. Reserve space: In the place you want to install (such as: kitchen cabinets, bathrooms, basements, etc.), expand the calculation process according to the physical size measurement (you need to leave a certain amount of installation and operation space).

This item is particularly important because it involves whether the selected equipment can be installed and the convenience of your use after installation, as well as future maintenance, etc., which will generally be completed by the manufacturer's technicians.

After purchasing a water softener:

1.When the hydropower is renovated, the designer comes to the door to guide the reserved space and power supply for free

2.Discuss the size of the cabinet with the cabinet designer;

3.Free installation of water purification equipment and free testing of water quality;

4.The deposit can be refunded at any time, so that the owner can order without worry;

5.Install now, pay later.

Instructions for installation of imported water softeners:

1.The installation of household water purification equipment requires a certain amount of space to be reserved for water purification equipment during hydropower transformation, and water purification equipment designers are required to come to guide them;

2.To set. Calculate the height of the cabinet with the panicle cabinet, the horizontal depth, and the height of the water purification equipment;

3.The installation of small kitchen treasures should be designed in a good position;

4.The water basin should not be too deep, and the water basin with lower drainage should be selected as much as possible;

5.If the installation is fully automatic, it is also necessary to reserve a power supply;

6.After the installation of cabinets and drainage, water purification equipment is installed.