The laptop only has one network cable socket how to connect to the local area network

Buy another switch, TP-link, D-link brand can be, and buy two network cables.

The order of connection is, Cat - Switch - Laptop and Desktop.

That is, the switch is connected to the cat, the laptop and desktop are connected to the switch with a network cable, and the laptop and desktop are on an equal footing.

Set the IP addresses of both computers to automatic, and you're good to go.

Hello, connecting to the LAN is to the router, connect your main network cable to the cat, and then use the cat's network cable to connect to the router The router can connect you to a lot of network cables, use these network cables to connect to different computers, you can use the local area network, the local area network must have a router, purely handwritten.

A 5-socket router, plus two network cables (plugs need to be installed at both ends of the network cable), and plug all three cables into the router outlet (main network cable, two you bought). Then connect the other end to your computer, both phones are dialed, is it okay! That's how I got it myself!

Here's how it works: LAN sharing!

Solution 1: If you want to connect with other computers to play games such as Frozen Throne, you can directly connect 2 computers with a crossover cable and one network segment

Solution 2: If you want to have 2 or more computers at the same time and play LAN games and surf the Internet, then you have to sell a D-Link switch or TP-Link exchange that is not expensive.

You can only add one switch or router.

You buy a 4-port router, plug the network cable of the notebook into the WAN port on the router, and plug the 4 ports on the LAN port of the router into the notebook and desktop, so that it can be connected to the LAN, and then enter the router to configure it to access the Internet.

Buy a router to connect to the back of m,Isn't it possible to connect the laptop to a network with the desktop?,I don't know if you mean that.,If the desktop is in another one,Use an isolation card.,But this thing is not very easy to use!

1. Right-click the network icon on the desktop of win10 system and select "Properties", as shown in the figure below.

2. In the Network and Sharing Center window, click "Set up a new connection or network" as shown in the image below.

3. Select "Connect to Internet" in the Settings Network or Network dialog box, and then click Next, as shown in the figure below.

4. Click Set up a new connection in the Connect to Internet window, as shown in the figure below.

5. Then select "Broadband PPPoE", as shown in the following figure.

6. Finally enter the ISP information provided by the Internet service provider, both and the password. Then click "Connect" as shown in the image below.

7. After clicking on the link, the system prompts that your Internet connection is being created, wait a while, and the broadband connection will be set.

Once connected, the Network & Sharing Center will display the wired network you just set up.

8. After the broadband connection is successfully created, you can see the broadband connection icon we just created in the network connection, right-click on the broadband connection, and select "Create shortcut" to facilitate us to quickly connect to the Internet in the future. This is shown in the figure below.

There is a network cable interface in the bedroom, can the laptop be connected to the network cable for the network?

OK. Connection Working:

Find a network cable.

A wired network card that is connected to a computer at one end.

The other end is connected to a wired network port on the wall.

Detection work: On the computer, combine the key win+r

Enter ping if it is this network segment), if there is a signal response, the situation as shown in the following figure will appear, and the network can be used.

Please click Enter a description.

Please click Enter a description.

Check if there is a network cable on the wall to your home's wifi (wireless router).

The network cable is not connected.

Is the network cable good?

Look up one place, do step 2 once until you see the same situation on your computer as step 2.

Of course, if you don't, you'll have to ask a friend to come and help you.

This shouldn't work.,You can find a master to help you bridge and get a wireless router in the room.,There are strategies on the Internet.,You can try it yourself.。

Yes, just plug in the network cable and try it, and if the wifi is poor, you can consider increasing the bandwidth, changing the router, or adding a wifi relay.

If the network cable in this network cable interface is connected to the network cable end of wifi, then it can be used.

Go to the business hall of China Mobile or Telecom or Unicom, and ask them to add an optical cat to you, the signal thief is good.

The wired connection interface of the laptop to the network is called the RJ45 interface. The head of the network cable is the crystal head. If you look at the size, you can almost recognize it. Generally, there is a logo next to the interface, which is different for different computers!

The shape of the network cable interface of the laptop is exactly the same as that of the desktop computer...

The laptop can be directly wired through the network cable, and you only need to insert the network cable into the network interface of the handwriting grip notebook. In addition, laptops are now usually equipped with Wi-Fi connectivity and do not require a wired network connection to access the Internet.

Although Wi-Fi connections have become more common, there are times when you still need to use a wired internet connection, which is more stable and reliable. In some of the more complex network environments, a wired network connection is also easier to set up and configure. In addition, in some workplaces or schools, the wireless network may not be very stable, and a wired network connection can be more stable to ensure that the network is unstable.

If you need to use a wired network connection, you need to prepare the network cable and plug it into the network port of the laptop. Next, you should check in Windows Device Manager to see if the wired network card has been tapped back, if not, you need to install the driver manually. Generally speaking, if the laptop is newly purchased, it should already come with a driver for the wired network card.

Overall, the laptop can be accessed via a wired network connection, which is more stable and reliable. However, if users need to use the network frequently in a wireless network environment, then a wireless connection is also a good option. <>