-
Old machine, right? Block the floppy drive from the BIOS settings.
The following is copied over:
Press the "Delete" key on startup to enter the BIOS:
1.Turn off the floppy drive.
standard cmos → drive a:none
2.Tell Windows 9X, ME no floppy drive.
advanced bios features →report no fdd for win 95:yes
3.Disable the floppy disk controller.
integrated peripherals→ onboard fdc controller:disabled
Tips: Among them, the first two items are required, as for the floppy disk controller, because there is no floppy drive, there is no need to open it. Even if you have a floppy drive, it is recommended to set "Report No FDD for Win 95" to Yes?
Note: Due to the large number of BIOS versions, the above options may be slightly different from what you actually see in your motherboard BIOS, but you can achieve this by turning off the "Floppy Drive A" and "Floppy Drive Seek" options.
-
The best thing to do is to replace it with a new one.
-
Reload. Delete the 300m partition in front of the system partition.
-
The boot mode selected is incorrect, the U disk is selected for the U disk, and the optical drive is selected for the optical drive.
-
If you can't fix it, you have to reinstall the system, which is the most fundamental solution. If the system can't get in, with the help of someone else's computer, use a USB flash drive to install the system, the general process is as follows:
3. Find and select the one-click system program on the desktop, and follow the steps;
4. Wait for the installation and restart the computer;
5. After restarting, wait for the system to be configured after normal boot, and try again if you can't enter the system if you can't get into the system if you don't boot normally;
6. If you still can't get in, you have to consider whether it is an image file and change the image.
-
Fix it first, try it, if it doesn't work, you can only reinstall the system.
-
It shouldn't work, the system needs to be repaired.
-
In this case, the system can only be reinstalled.
In fact, as long as a primary partition is OK,It is recommended to back up the data,C、D two partitions are from the new partition or formatted,It's best to use NTFS format,Only keep a primary partition,In the installation of win7, let yourself format the installed partition。 >>>More
The solution is as follows:
1. Run "msconfig" and remove the hooks in front of the relevant items in the startup items! >>>More
Have you started the following services? Is it also possible to cancel previous optimizations? If it is an optimization master, both Super Rabbit can cancel the optimization. >>>More
An example of someone else.
Example: One day, when the computer restarts and enters WinXP, the system prompts: "SystemRoot System32 file is illegal or the file is corrupted, the system cannot boot". >>>More
GhostGhost software is an excellent hard disk backup and restore tool launched by Symantec in the United States, which can realize the backup and restoration of partitions and hard disks in various hard disk partition formats such as FAT16, FAT32, NTFS, and OS2. Commonly known as cloning software. >>>More