I have a Samsung 4650S printer, why doesn t my scanner work?

Hello: According to your description, please follow the steps below:

1.Install random scanning software and drivers:

2.After the installation, the scanning operation is as follows:

First, check if your drive is finished.

Second, if there is a problem with copying and printing, if there is no problem with these two things, it is a problem with your computer driver, one is to reinstall the driver, if it doesn't work, you have to reinstall the system.

You can click on the Start menu in the lower left corner on the computer with the printer to find the device and printer. Select the printer in the device and printer interface, right-click, select Start Scan, and follow the steps to use it. The specific scanning method is as follows:

1. Place the file under the printer cover and close the cover, click the start menu in the lower left corner of the computer with the printer, and select the device and printer to enter.

2. You can see the Samsung printer in the page that appears, select the printer, right-click, and select the Start Scan button.

3. In the scanning interface that appears, you can select the corresponding ** color format and resolution, and click Scan.

4. At this time, you can see that the printer is scanning.

5. After waiting for the scanning progress to be completed, the system will automatically pop up the import dialog box, enter the required file name and click Import.

6. After waiting for the import to be completed, the system will automatically jump to the folder where the import is stored, and you can see the scanned.

How does Samsung Printer SCX-4623FH scan with machine panel scan button?

Here's how:

1.Make sure the machine is connected to your computer, and the power is turned on, and the scanner is installed.

2.Load the original face up into the feeder, or place a single copy of the original face down on the scanner glass plate.

3.Press Scan on the Control Panel.

4.Press the left and right arrows until Scan to PC is displayed, and then press OK.

5.Press the left and right arrows until "Local PC" is displayed, and then press [OK].

Note: If you see an unavailable message, check the port connection.

6.Press the left and right arrows until the desired My Document appears, and then press OK. (The default setting is My Documents).

7.Press the left and right arrows until the desired settings appear, and then press OK.

Resolution: Set the image resolution.

Scan Color: Set the color mode.

Scan Format: Set the file format in which you want to save the image.

Scan Range: Set the image size.

Note: The scan format appears only if you select My Documents as the scan target. If you wish to use.

To set up scanning by default, press Start.

Information**.

1 All Dear Samsung Users Hello:

Based on your description, it is recommended that you:

1.Check to see if you can make copies.

2.If copying works fine but you can't print, it may be that your print driver isn't installed correctly.

3.If the print status shows that the deletion is pending, if you try to delete it and can't do it, please restart the computer and the printer, and then try to delete it.

Here's how to manually delete the delete:

1.Click "Start" and "Run" on your computer.

2.Enter "net stop spooler" in the "Run" window and click the "OK" button to stop the printer service.

Note: You need to stop the print job to manually delete the print job in the folder.

3.Enter "spool" in the "Run" field and click OK.

4. Go to "spool" and select the printers folder to enter.

5.In the printers file, delete all the files.

6.Enter the "net start spooler" command in "Run", and then click "OK" to start the printer service.

Note: You need to start the printer service before you can use the printer normally, otherwise it will not work properly. After the above operations are completed, the print job can be deleted and reprinted.

We welcome your comments on our services.

There are two cases in this case.

1.The first case is that the printer is out of ink, and it is recommended that you check if it is out of ink.

2.The second situation is that the internal parts of the printer are faulty, so they can't be printed.

Scan with Samsung Easy Document Creatorr software:

1.When the installer is complete, place the single-page document face down on the document pane or load the document face up into the document feeder (multiple scans can put paper into the document feeder).

2.Open the Easy Document Creator software and click Scan.

Note: If [Scan] is grayed out and cannot be selected, please click [Search], then select [Start Search], select the printer in the search results, and then press [Confirm].

3.Select Document Scanning. (There are a variety of scanning methods in scanning, which can be selected according to the requirements of the scanned file, and the following is introduced with "document scanning" as an example.) ）

4.The machine will automatically start pre-scanning the file, and after the pre-scan is completed, click [Scan]. (The scan settings can be made according to the requirements for the scanned file.) ）

5.After scanning, set the items in the red box according to your needs, and finally click [Save].

Hello, first turn on the power, put the ** into the all-in-one machine, and then click "My computer", there will be an option for a Samsung scanner in my computer, of course, it is possible not to write the word "scanner" directly, it may be in English. Never mind, you find an icon with the word "samsung" on it, double-click on it

According to your description, please refer to the manual to see how to open the lid and how to take off the paper.

There should be a scan button on the keyboard, you put the thing you want to scan, press scan, press start and you're good to go. Once it's scanned, it'll be sent to your computer.

First make sure the driver is installed.,Turn on my computer and there will be a scanner.,Just open it directly,