PSP1000 rocker incurable

The landlord listened to me, I just repaired my fat p, in fact, it's not broken, I was playing a ride when I found that the rocker was a little drifting, so I removed it and got the joystick, and then after installing it, it has been drifting in the lower right corner of the net, so I went to the rocker and conduction, and found that it was still drifting...I thought it was a broken board, but it's not, fat p will drift when it's not conductive, so the landlord won't drift as long as he puts the rocker on it, and if it still drifts, it means that your screws are not tightening the rocker You press hard to see if it will drift If it doesn't drift, just tighten the screws on it If you don't understand, you can q me 510656151

I've also encountered this problem, and it's a pressure problem with the screw, and screwing too tightly or too loosely can also happen to the character in the game walking in one direction. I'm running games like Monster Hunter....) and then adjust the tightness of the back screws (those that hold the shell in place).

PSP1000, you're still so entangled, find JS and sell it for 300 yuan, add some money to buy a new one, or sit back and wait for PSV

On August 25th, the MHP3HD PS3 version or a different PS3 version will work.

That's a pressure problem with the screw, and if it's too tight or too loose, it can also happen if the character walks in one direction. I'm running games like Monster Hunter....) and then adjust the tightness of the back screws (those that hold the shell in place).

LZ swap out the cables together.

There are several situations in which the rocker does not work, and you have to judge which one is to know the maintenance.

The first is due to the wear of the conductive glue in the rocker, which generally occurs in the normal use of the machine for two to three years, in this case, there is no problem with the mechanical part inside the rocker, and only needs to change the conductive glue (that is, the black Dongdong after opening the chassis), ** is 20 30 yuan.

The second is the wear of the rocker cap, this situation is generally to press the rocker on the joystick gently when the rocker cap will shake, so that when playing will not move well, as long as the joystick cap is changed (that is, the one rubbed by hand), ** in 0 10 yuan (see if you are familiar with JS).

The third is the problem inside the rocker, generally the spring inside is stuck or strained, this is not repaired, it is irresistible force (natural strain), just change a rocker, the original 60 90 yuan, assembled within 40.

The fourth is more troublesome, you need to test it yourself, open the PSP Internet browser, move the mouse to the center of the screen, press the cover a little harder, observe whether the joystick will drift (that is, the mouse will not move), if it will, then not very lucky, it is a problem with the motherboard, it can only be handed over to JS for maintenance, he will tell you that there are a few loose solder joints, three or so is 60 yuan, and the above will add money.

By the way, tell you how to distinguish the original joystick from the assembly, look at the circuit board, the gold finger is dark gold, the shiny is the original, the assembled is too bright, and the original circuit board is light green, and the assembled green is darker (it can be seen in the comparison of replacing the original joystick that suits you).

After the repair, you still have to pay attention to care, and don't rub the joystick too vigorously when playing games like Monster Hunter, otherwise the next repair will not be far away.

By all means. Hope it helps.

This is to replace the joystick, and the joystick is about 80.

It has nothing to do with the motherboard, it's just a joystick problem, how long has your joystick been used? Have you changed it?

Here's my experience, and I hope LZ can refer to it and get help.

A few months ago, my PSP1000 joystick had a problem, automatically went to the side, very depressed, Monster Hunter did it, checked it on the Internet, many said it was fake and bad, and some said it was a problem with the contact between the shell and the silicone connection.

Helplessly, I bought a shell more than 150, a rocker 30, and a special screwdriver 10 in **, and sent it back (I am in a small county in the mountains).

And then the rocker is better.、The tragedy is that the problem is half a month later**、Crazy down.。。

Continue to search for information on the Internet, saying that it is a problem with conductive adhesive. So I bought a conductive adhesive... Put it on... It's super easy... Perfect in an instant... I almost cried... t,t

Soldering may be dangerous to the machine.、It's not recommended Oh.、Maybe it's okay to change a conductive adhesive.、Your 1000 should be used for a long time (mine is...) So this one is risk-free and cheap (note that the original silicone is transparent, and the buy is black and white, at least mine.) But it works well.

Isn't it necessary to do it once and for all, and that there is something in the world that won't break? Play for a few years, what's the right The rocker is 30 if it's broken, the shell is not recommended to be replaced, and the danger is big (my umd warehouse is not tightly closed, it will penetrate a little bit, and the problem is not big.) ）。Above.

If the joystick is broken, it is recommended to go to a video game store to repair it, and it is better to have a warranty certificate.