Nissankida is inching how long does it take to change the belt

Nisankida belts are recommended to be replaced every 8-100,000 kilometers, depending on the wear and tear

Hello, the timing belt is generally 80,000 kilometers to replace once, change the belt, the tensioner set is generally about 950 yuan.

I work in the Nissan 4S shop, I have a better understanding of Tiida, the car is equipped with the Nissan HR16DE engine, the valve mechanism adopts the form of a timing chain (no timing belt), the chain of the car does not need to be adjusted, maintenance. But it must be replaced when doing an overhaul, and I hope it can help you.

Hello, the normal replacement cycle of the official belt of the vehicle is about 80,000 kilometers, and it needs to be replaced by professional maintenance personnel in the auto repair shop!

Nisangita belts generally need 7-80,000 kilometers to replace, depending on the use and wear and tear.

For Nissan Tiida, if you want to replace the timing belt, it is recommended that you consider replacing it at about 60,000 kilometers, which may be better.

The timing belt of this car is generally replaced once when it is 60,000 to 80,000 kilometers, and you can refer to the maintenance manual.

Hello! Normally, about 50,000 kilometers in two years will be checked to see if there are cracks, and if there are cracks, they need to be replaced.

Hello, the timing belt of this car can be replaced in normal use at 60,000 kilometers.

Hello, theoretically it is between 80,000 and 100,000 kilometers, but before that, you should do the timing belt inspection, so that you can know the wear of the belt more effectively.

Hello, the timing belt of this model does not stipulate how many kilometers to replace, you just need to see if there are cracks in the belt.

Hello, Nissan Tiida timing belt replacement cycle is 80,000 kilometers, timing belt replacement needs to go to the repair shop to find professional maintenance personnel to help you replace, a set of costs about 800!

You are like the timing belt of this vehicle, it is recommended to replace it every 8 to 100,000 kilometers.

In general, about 100,000 kilometers, replace once, I strongly recommend that you replace the original parts, do not go outside to replace, another aspect of replacement, about 1000 yuan.

Nissan Tiida This car timing belt is 80,000 kilometers to replace once, 4S is generally about 1200 yuan.

Hello, usually the formal belt is generally 7 to 80,000 kilometers to replace once. But this is not the prescribed time, this needs to check whether there is any crack in the timing belt. It is recommended that you go to the repair shop to have it checked.

Tiida uses a timing chain, which needs to be checked once every 100,000 kilometers or so, and needs to be replaced if damaged. Tiida uses a timing chain, which needs to be checked once every 100,000 kilometers or so, and needs to be replaced if damaged. The timing chain is an important part of the engine valve system, which ensures the accuracy of the intake and exhaust time through the connection with the crankshaft and a certain transmission ratio.

The installation method of the timing chain is as follows:

1. Align the mark of the camshaft timing gear with the mark on the valve chamber cover;

2. Align the crankshaft timing gear mark with the front cover mark;

3. The timing chain is installed in turn, such as crankshaft timing gear, water pump pulley, idler pulley, camshaft timing gear and pulley;

4. Loosen the pulley installation bolt 1 4-1 2 turns, compress the automatic tensioner push rod to the lowest position and insert it into the hole with steel, adjust the pulley with a snap ring plier, rotate counterclockwise to make the two adjustment holes of the pulley parallel to the ground, lock the fixing bolt, and pull out the steel needle;

5. Rotate the crankshaft clockwise 2 times to check whether the timing mark is correctly aligned;

6. Turn back to the outer lower cover of the right nail timing chain of the engine, and the outer upper cover of the timing smile belt after opening the belt;

7. Replace the generator and the compressor belt of the air conditioner;

8. Check whether the engine is abnormal.

Millions of car purchase subsidies.

The belt of the Trent generator needs to be replaced once when it has been driven for more than 100,000 kilometers or more than 5 years. Please refer to the car care manual for details. Generator belts are usually inspected at 80,000 kilometers and replaced if there are cracks.

The method of manually replacing the generator belt;

1.Turn off the engine, let it cool, open the hood and locate the generator belt on the front of the engine.

2.Press the belt between the pulleys to check for slack. If you press more than 1 2 inches, the belt will come loose, which will affect the performance of the generator and even damage the belt.

3.Remember where the generator belt is installed and the bending order of the engine wheels used.

4.Clamp the tensioner with an adjustable wrench and press it down.

5.Check the generator belt for oil or grease contamination, flip the belt to check whether there are cracks in the inner layer, whether the rubber block is missing and slippery, and whether the timing belt has oil stains, etc.

6.Move the generator outward to loosen the belt.

7.Peel the generator belt from the pulley, and then remove the generator belt.

8.Compare the removed old belt with the new belt and install the new belt after confirming that it is correct.

9.Hold the belt with your hand and check the tightness of the belt.

10.Start the engine to verify the repair results, and check the belt tightness again after shutting down the engine.

Millions of car purchase subsidies.

Trent uses a timing chain, which needs to be inspected once for about 100,000 kilometers and replaced if damaged. Trent uses a timing chain, which needs to be inspected once for about 100,000 kilometers and replaced if damaged. The timing chain is an important part of the valve train system of the Qisongliang engine, which can ensure the accuracy of the intake and exhaust time by connecting with the crankshaft and matching with a certain transmission ratio.

The installation method of the timing chain is as follows:

1.Align the markings of the camshaft timing gears with the markings of the valve chamber Sakura Haru;

2.Align the crankshaft timing gear marker with the front cover marker;

3.Install crankshaft timing gear, water pump pulley, idler, camshaft timing gear, pulley and other positive attitude wide chain in turn;

4.Loosen the pulley installation bolt 1 4-1 2 turns, compress the automatic tensioner push rod to the lowest position, insert the steel into the hole, adjust the pulley with a snap ring plier, rotate counterclockwise so that the two adjustment holes of the pulley are parallel to the ground, lock the fixing bolt, and pull out the steel needle;

5.Turn the crankshaft clockwise 2 times to check whether the timing mark is aligned correctly;

6.Rotate back to the engine right nail timing chain outer lower cover and timing belt outer upper cover;

7.Replacement of generators, air adjustment of compressor belts;

8.Check the engine for abnormalities when you get in the car.

Millions of car purchase subsidies.