The reason why the indicator light of the Snow 202 model freezer is not lit and not refrigerated

Updated on Car 2024-02-27
8 answers
  1. Anonymous users2024-02-06

    Either the line is not working, or the indicator light is burned, generally the red light represents the power supply, the red light is on to indicate the power path, the red light is not on, check whether the power socket is powered on, and then check whether the wires inside the freezer are disconnected; The green light represents the compressor, the green light is on, indicating that the compressor is running normally, and the green light is not on indicates that the compressor has reached the temperature and stopped or the compressor is broken and does not start. "Changling Freezer".

  2. Anonymous users2024-02-05

    Summary. The indicator light is on, and the freezer is not refrigerated, indicating that the freezer can be powered on normally, this kind of failure is usually caused by the abnormality of the refrigeration system, and it is repaired as follows:

    1. Turn on the power first and check whether the compressor can run normally.

    2. If the compressor does not stop, check whether the indoor temperature is normal.

    3. If the indoor temperature is normal, check whether the thermostat adjustment is normal.

    4. If the fault is still not eliminated after readjusting the thermostat. Then check whether the refrigerant in the refrigeration system is leaking or clogged.

    Corresponding workarounds:

    1.replacement of compressors;

    2.When the ambient temperature is lower than 4 degrees, move the freezer to a higher temperature environment;

    3.The thermostat should be adjusted according to the season, it can be adjusted to 1st or 2nd gear in summer, and 4th or 5th gear in winter.

    4.Refrigerant leak or compressor stuck: Repair or replace.

    Note: If the above methods cannot be solved after trying, contact the maintenance personnel for maintenance in time.

    What is the reason why the freezer does not refrigerate and the indicator light does not light up.

    Hello, I have seen your question here, I am sorting out the answer, and I will reply to you later, please be patient Thank you.

    The indicator light is on, the freezer is not refrigerated, indicating that the freezer can be energized normally, this kind of fault is usually caused by the abnormality of the refrigeration system, and it is repaired according to the following steps: 1. Power on the machine first, and check whether the compressor can run normally. 2. If the compressor does not stop, check whether the indoor temperature is normal.

    3. If the indoor temperature is normal, check whether the thermostat adjustment is normal. 4. If the fault is still not eliminated after readjusting the thermostat. Then check whether the refrigerant of the refrigeration system is leaking or noisy and clogging.

    Corresponding solutions:1replacement of compressors; 2.

    When the ambient temperature is lower than 4 degrees, move the freezer to a higher temperature environment; 3.The thermostat should be adjusted according to the season, it can be adjusted to 1st or 2nd gear in summer, and 4th or 5th gear in winter. 4.

    Refrigerant leak or compressor stuck: Repair or replace. Pay attention to the side of the day:

    If the above methods cannot be solved after trying, contact the maintenance personnel in time for maintenance.

  3. Anonymous users2024-02-04

    Summary. Hello, glad to answer for you.

    If the refrigerator light does not light up or refrigerate, it may be that the main circuit is not energized, check whether the power cord is open. If the light is not cooling, check the thermostat, as long as it is not a compressor or leakage problem, it is generally easy to rule out.

    The refrigerator light does not light up and does not refrigerate if the wiring board is broken, the plug wire is broken, and the fuse is burned. If you don't have to ask here, you won't do it anyway, I advise you to contact the after-sales service or send it to the maintenance department, otherwise you should first self-test, and describe the process and results clearly, and attach a circuit diagram, mark the actual measured voltage, in order to help you find the fault range.

    Generally, it is not refrigerated, and the light is not on, which means that the power supply is not turned on.

    1. Check whether the temperature adjustment knob is misoperated to hit the gear to the "off" state, the thermostat has a stop gear (0 gear), and the compressor will not work if it is placed in the stop gear.

    2. Check again whether the socket and refrigerator plug used in the refrigerator are broken. Check if the refrigerator insurance is fused.

    If it is normal, contact the after-sales service to repair it, it should be a problem with the wiring of the refrigerator.

    Hello, I am glad to answer for you that the refrigerator light is not lit or refrigerated, it may be that the main circuit is not energized, check whether the power cord is open. If the light is not cooling, check the thermostat, as long as it is not a compressor or leakage problem, it is generally easy to rule out. The refrigerator light does not light up and does not refrigerate if the wiring board is broken, the plug wire is broken, and the fuse is burned.

    If you don't have to ask here, you won't do it anyway, I advise you to contact the after-sales service or send it to the maintenance department, otherwise you should first self-test, and describe the process and results clearly, and attach a circuit diagram, mark the actual measured voltage, in order to help you find the fault range. Generally, it is not refrigerated, the light is not on, and it is said that the power supply is not connected. 1. Check whether the temperature adjustment knob is misoperated to hit the gear to the "off" state, the thermostat has a stop gear (0 gear), and the compressor will not work if it is placed in the stop gear.

    2. Check again whether the socket and refrigerator plug used in the refrigerator are broken. Check if the refrigerator insurance is fused. If it is a normal inspection imitation, contact the after-sales service to repair it, it should be a problem with the wiring of the refrigerator.

  4. Anonymous users2024-02-03

    Hello dear, it is a pleasure to serve you <>

    There may be several reasons why the freezer running light does not light up and does not refrigerate:1Power supply failure:

    The freezer's socket is not energized, or the power supply is faulty due to a short circuit in the mains. 2.Internal bulb failure:

    If the light inside the freezer does not come on, it may be caused by a damaged bulb or poor wiring contact, and the bulb needs to be replaced or the wiring needs to be repaired. 3.Refrigeration system failure:

    If the freezer is neither hail, but not refrigerated, empty and not lit, it is likely that the refrigeration system is malfunctioning. It may be that there is a problem with the compressor, condenser, evaporator and other components, which need to be inspected and repaired by professional technicians. 4.

    Controller failure: The controller is the core of the freezer's entire system, and if there is a problem with the controller, it may also cause the freezer to not refrigerate or the lights to not light up. You can try setting the temperature controller again and checking that the power supply to the controller is working.

    To sum up, the possible causes of the freezer not lighting up and not cooling are complex, and it is recommended to contact professional maintenance personnel to solve such problems.

  5. Anonymous users2024-02-02

    Freezer power indication.

    The bai lamp is bright, which is the reason why it is not refrigerated

    1. The expansion valve of the freezer and the outlet DAO valve are reversed.

    Improper rectification, refrigeration in the system answers.

    Excessive agents, presence of air in the refrigeration system, poor sealing of valve plate components, worn piston of compressor liners, etc.

    2. The high-pressure output buffer pipe in the compressor is broken, or the screw fixing the tube is loose, resulting in the high-pressure pipe not exhausting and the low-pressure pipe not suctioning, so although the compressor is running, it is not refrigerated.

    3. The refrigeration system leaks, the refrigerant runs out, and although the compressor is running, there is no refrigerant evaporation and heat absorption in the system, so the temperature in the refrigerator does not drop.

    4. The capillary is blocked, the refrigerant cannot enter the evaporator to evaporate and absorb heat, and the temperature in the refrigerator does not drop.

    5. Due to improper welding or improper use of the freezer, there are leakage points in the refrigeration system, and the refrigerant in the refrigeration system will not be refrigerated if all the refrigerant is leaked within a certain period of time.

    6. Check whether the freezer is used correctly, as different gears have an impact on the power consumption and temperature of the freezer.

  6. Anonymous users2024-02-01

    The electric source light of the freezer is normal, but the running light is not on

    First, the return line indicator light is damaged or broken.

    The second is the failure of the thermostat, resulting in an open circuit.

    The running indicator light is damaged or broken, which does not affect the refrigeration, so the compressor can run; The thermostat is faulty, causing an open circuit, not only the indicator light is not lit, but also the compressor stops working because the thermostat is powered off.

    In places where rodent infestation is more serious (such as restaurants), the fault of rats biting off wires cannot be ruled out.

  7. Anonymous users2024-01-31

    It should be that the refrigerator does not act aqui te amo.

  8. Anonymous users2024-01-30

    First of all, you need to check that the power supply to the freezer is working properly and that the plug is plugged in tightly. If the power supply is fine, then it is possible that the fuse of the freezer is burned out and you need to replace the fuse. If the fuse is normal, then Xiangsun may be that the compressor of the freezer is faulty and needs to be repaired by a professional maintenance personnel.

    In addition, you also need to check whether the condenser of the freezer is clean, if the condenser is covered with dust, it will affect the refrigeration effect. Finally, if none of the above methods can solve the problem, then it may be that the controller of the freezer has a dust barrier and needs to be replaced. In short, the freezer does not light up and does not refrigerate may be caused by a variety of reasons, and it is necessary to stare at the banquet one by one to find the problem and solve it.

Related questions
13 answers2024-02-27

Hello! Please ask which model you are referring to, please describe it in detail, according to your description, it is recommended that you restart the phone to try, and then charge the phone for 20 minutes to try, if it still doesn't work, it is recommended that you try the phone Shuangqing, Shuangqing will lose data, the phone is turned off and press and hold the volume up button and the power button for 3 to 4 seconds After the phone appears vivo phone logo, let go of the button to enter recovery mode, first select Wipe Data Factory ResetAfter completing the waiting interface, select Wipe Cache Partition, and then select Reboot System Now to restart the phone immediately.

21 answers2024-02-27

Dear users, hello!

Hello, you can try the reset operation. >>>More

8 answers2024-02-27

Generally, broadband modems have four indicators, which are POWER, LAN, ADSL, and INTERNET. >>>More

5 answers2024-02-27

Monitor black screen workaround:

1. If the monitor is not used for a long time, the monitor will automatically turn into sleep energy-saving mode and the screen will be black. >>>More

9 answers2024-02-27

There are several situations, 1, your cat has a problem, that is, it is not in contact or something. (Go for a repair, or replace it with a new one) 2, the problem of power supply voltage. 3. The shunt is very important because it is related to the connection between the two sides. >>>More