What s the deal with the Glash tte watch going slow?

What is the reason why the watch is always slow?

1. Insufficient power reserve: you need to check whether the power is sufficient, if the amount of exercise of the automatic mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2. Insufficient power: If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and the watch can be sent to a special maintenance point to check the power.

3. Hit or impacted: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

4. Need for maintenance: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained and sent to the designated maintenance point for maintenance services.

5. In addition to the above common situations, the watch is magnetized under the influence of some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error.

How to solve the problem that the watch is always slow.

In the case of quartz watches, if there is a sudden slowdown, it is most likely caused by a low battery. After discovery, it should be sent to a professional maintenance center for power testing and timely replacement of the batteryHint:

New watches usually have a label on the back cover of the meter when the battery has been depleted. If the battery of a watch has been replaced, the battery life is generally 1 2 years, depending on the use, and if it is not replaced in time, the battery may leak and damage the internal parts of the watch.

The slowness of an automatic watch may be due to long-term contact with electronic devices that are magnetized and need to be demagnetized at a watch repair shop. Or it is a long-term storage of kinetic energy (normal wearing for one day can store two days of kinetic energy, and insufficient kinetic energy can also be manually wound to fill the mainspring.) The slowness of the quartz watch is generally caused by low battery power, so you can try changing the battery.

When the automatic watch is at room temperature, the error of 45 seconds in 24 hours is normal. Since automatic watches are self-winding by the swing of the arm, they must be worn for more than eight hours a day to ensure accurate timekeeping. If none of the above methods work, you should go to a professional watch repair center for testing.

In this way, it can accurately guide the reason for the slow running of the watch and repair it effectively.

Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

Insufficient kinetic energy: the watch is not winded enough, and the kinetic energy is insufficient; gear failure; Lack of maintenance will now cause the watch to be inaccurate, the specific situation requires you to go to a professional repair center for testing.

Glashütte Watch Aftermarket Repair Center: 400-659-0877

What's wrong with the mechanical watch suddenly not leaving?

The automaton suddenly stopped walking. First consider whether the watch is powered or not. The power of an automatic watch requires the mainspring to be raised according to the swing of the arm.

If you wear it for less time and the amount of arm swing is less, the watch is easy to stop moving. If there is a manual winding function, you can manually wind the watch, and if not, if not, you can shake the watch. If the watch is not gone, then the movement is malfunctioning.

The Glashütte watch repair center is located in Room 918, 9th Floor, Landmark Plaza, Nanjing East Road Pedestrian Street, Huangpu District, Shanghai, if you want to wear it every day, the best way to maintain it is to tighten the mainspring every two weeks to ensure that its gears run normally and smoothly. Gently rotate the crown until you can feel a slight urgency.

Reasons for the slowness of mechanical watches:

1. The watch is magnetized, and the watch needs to be demagnetized.

2. Insufficient power: mechanical watches are divided into two types: manual winding and automatic winding. Lack of power is often an important reason for the watch to slow down or even stop.

3. Mechanical failure caused by insufficient maintenance: loose internal parts lead to inaccurate timing of the watch. Dust, foreign matter, so that the gear teeth are stuck with each other, and some watches are oiled too much or too little, which will make the watch go wrong.

If the watch does not go, the first thing to think about is whether it is because the watch does not go because of the long-term processing of the stationary state. If the watch is in a stationary state for a long time, the watch will not automatically wind, which will make the watch lose the ability to move and stop walking. The above problem is actually very simple, users only need to swing the watch dozens of times to restore the time.

If you want to ensure the accuracy of automatic mechanical watches, you should wear them normally for more than 8 hours a day.

Mechanical watch The oil inside the movement is dry or there is a problem with the movement Quartz watch The battery is low The battery is dead The internal problem of the movement should be sent to the service center for testing The address in Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

Reasons why the watch is not running accurately:

1.Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized and repaired to return to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

If the watch is inaccurate, it is recommended that you bring it to the after-sales center for inspection and repair, so as not to affect your use.

Reasons and solutions for inaccurate watch time:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the watch to a special maintenance point to check the power or replace the battery.

3. Having been beaten or impacted. The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to a special repair shop for testing.

4. Maintenance is required. Lack of oil or wear and tear of internal parts of the movement may cause time problems, which need to be serviced and sent to a designated repair point for maintenance services.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error.

Sending the watch to a designated repair point for professional inspection and adjustment can restore the watch to the normal error range.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

2. Generally speaking, the accuracy of quartz watches is high, and the Swiss standard is that the monthly error is within 15 seconds. Some precision movements can be within a few seconds per year.

If the watch is not washed for a long time, the movement parts lack oil, the friction increases, and the wear and tear of the movement will naturally increase, so it may lead to inaccurate timekeeping.

The slow movement of the watch may be due to lack of kinetic energy, or it may be that there is no oil inside the movement, it is recommended to go to the repair center for details, please call us below** for details.

1. The speed of the mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset of the horizontal position and the vertical position will produce a displacement, the mainspring is tightened from the top to the relaxation, the torque is unbalanced, and the external temperature, magnetic field, vibration, etc., even if the mechanical watch increases some frequency, it is impossible to achieve the accuracy of the quartz electronic watch.

3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this.

4. The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the precision change of the surface under a certain swing.

If you find that your watch is going faster or slower, you can find a compass to diagnose whether the watch is magnetized. Place the compass flat on the table, hold the watch at close range and quickly shake it back and forth above the compass, and try the watch in a few directions a few more times, as long as the pointer moves, especially if the deflection is very strong, you can judge that the watch is magnetized. The watch is magnetized and it is best to take it to this repair center for demagnetization.

Usually take care of the watch, do not let the watch come into contact with items with strong magnetic fields, and it is best to keep a distance of more than one meter. Do not leave your watch next to TV, computer, radio, mobile phone, mahjong table, refrigerator, washing machine, speaker, car door, or leather bag magnetic buckle.

Another reason is that summer is coming, and the hot weather will go faster than the cold weather. Yes, there are two laws of physics here. One is the thermal expansion and contraction, the weather is hot, the hairspring will be a little elongated, this everyone wants to get, therefore, the lengthened hairspring, the swing will also increase, and the watch will slow down; On the contrary, when the weather is cold, the watch will go faster.

You can try it by changing the time. If it doesn't work, go to a regular watch repair shop and let the watch masters take a look, so as not to mess up, causing the hairspring to be short, and it will be more difficult to repair it.

For the treatment of faults such as mechanical watches, demagnetization is the first, and it must be neat and thorough; Then check the position error of the watch, continue to check the hairspring, clean the hairspring with alcohol, it will be more fuel and tidy, volatile is good, and the low-quality fuel and magnetic field will make the hairspring show up to circle or attract each other. It is best to do a timekeeping quiz on the repaired watch, and it is best to do a long-term dynamic check to see which all-round rotating experimental rack is to be put on, or to wear it directly to check carefully. Those hidden deep faults can only be detected with the help of relevant instruments.

Adhesion by magnetic field swimming. Fall, knock, violent collision, adjust the speed of the hairspring is very soft, very thin, very fine, very elastic, easy to hang on the small parts of the balance, so that the balance wheel goes fast, the watch goes fast. If the above situation occurs on the watch, it is recommended to take it to the center immediately to solve it, so as to avoid further damage to the watch after a long time.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

Glashütte Watch Care Center: 400-659-0877

If the mechanical watch is not water-resistant, do not allow water and sweat to enter the case. Because water can cause mechanical corrosion, some semi-copper cases are copper, which is easy to corrode when worn daily for a long time. You should wipe off the water from the case to prevent water erosion.

Many waterproof rings are made of plastic, so please replace them regularly every year to prevent the watch from becoming water-resistant or deteriorating. In addition, I suggest that laying a plastic watch is also a new way to keep a watch of love all the time.

The reason why the watch goes fast:

1. If the wearer has a vigorous movement acting on the balance wheel, which aggravates the rotation amplitude of the balance wheel, it will cause the watch to swing and speed up the time.

2. The magnetization of movement parts is also one of the main reasons for the acceleration of the watch 3. The watch has suffered a collision, and there will also be a problem, that is, the secondary outer ring of the hairspring may touch the outer pile of the hairspring, which appears on the façade and in the dynamic form, which is also one of the fault problems that affect the walking at hand.