The computer won t turn on, and a lot of English appears

It should be that the system has crashed. It may be possible to restore the device by itself.

Check whether the line is connected from the installation.

This English refers to your boot loss, it is recommended that you use a USB flash drive to make a USB flash drive boot tool with boot repair, such as a computer store.

This software will do.

You need to go into PE and then put the boot to fix it on 1

Cause analysis: 1. Generally, there is a problem with the computer's system, usually the registry file is changed or lost, or the software is deleted by mistake and the boot is abnormal.

2. The user can choose F8 to revert to the last correct configuration and restart the computer.

3. If the problem persists, it is recommended that the user reinstall the system.

Press the F2 button to enter the BIOS when this prompt appears

Then F10 is saved and exited.

There are many reasons such as: poisoning, hard drive not connecting, system problems, etc.

This black screen type is the motherboard's PXE remote boot with the NIC enabled, and is the first boot item. 、

Go to BIOS, find the [Onboard LAN Boot ROM] option in the [Integrated Peripherals] option, and change the parameter after this item to [disabled].

If it still doesn't work, fix the boot. Repartition and reinstall the system.

2. Due to abnormal shutdown, after the system detects it, in order to ensure the normality and validity of the data, this disk error correction is usually carried out the next time you boot up, if this error correction will be triggered every time you boot up, it may be that the hard disk is physically damaged.

3. If it is caused by physical damage to the hard disk, you need to use HD Tune software to detect the hard disk, and if it is broken, it is recommended that you replace the hard disk to avoid data loss.

The boot system is missing, or the system boot file is missing. You can use the U disk boot disk to install the system from the new, or use the boot disk to install the system from the new system, the installation system must be the flagship version, and do a good job of restoring the factory settings to back up.

I can't find the boot device.

Enter the BOIS

You can set the hard disk to the first boot settings to try.

Plug in the USB flash drive.,Unplug it and reboot it to try.。

This tip is that the system cannot be found! The system is broken, let's redo it!