What does the computer blue screen error with code 0x000000F4 0x00000003, 0x89c6FB08, 0X89C6FC7C, 0X

This phenomenon is due to the fact that the memory module has been used for too long, and the gold finger of the memory module is actually made of copper. After a long time, the surface is oxidized, and the contact is poor. You can open the case, pull out the memory module, wipe the gold finger with an eraser, and then install it.

stop:ox000000f4 blue screen**Hint: Memory access error That number is the memory address, you can try it, pull down the memory and install it, my computer has had this problem before, and then changed the memory to solve it.

Some games are not compatible with your graphics driver, you can upgrade your graphics driver. It's best to reinstall the system first, if you have a problem with individual software, then you don't need to use it. You see if any other software has this problem, (this is done after you reinstall the system).

0x0000007e

Error Name 0x0000007e: System Thread Exception Not Handled (xyz5819 original reply, copy is welcome).

Failure Analysis 0x0000007e error indicates that the system process is experiencing a problem, but the Windows error processor is not able to accurately capture the error type. There are many possible reasons for this error, and it is generally troublesome when encountering this error. If you encounter 0x0000007e error, it is recommended to check the complete BSOD failure prompt to see if there is any mention of which file is causing the error, if you see the file name of an application software or a hardware device driver in the BSOD fault prompt, the problem is generally related to the corresponding application software or hardware device; If the file name that caused the error is not displayed in the BSOD Fault Imitation Display, you usually need to judge the cause of the fault based on other fault information, and it is recommended to check the Windows Event Viewer to see if there is a corresponding record.

xyz5819 original reply, welcome to copy).

0x0000007e

Possible causes for this error may include: (Microsoft explains).

1.There is not enough hard disk space to run the Standby Celery operating system. xyz5819 original reply, welcome to copy).

2.Your computer's BIOS may not be compatible with the operating system or may have to be updated.

4.The device driver or system service may be corrupted.

, enter the specific blue screen** to query. xyz5819 original reply, welcome to copy).

I'll give you 8 ways to debug, try it :

1.There are Trojan horses or viruses in the computer, **"360 Security Guard" and "360 Antivirus Dual Engine Version", it is recommended to "scan" viruses and Trojans to patch the vulnerabilities on the computer!

2.Your "device", or "chat software", or "Internet Explorer" program is unstable, or "the version is too old"! It is recommended to uninstall, **new, or upgrade it to the "latest version".

3.That is, you have installed two or more similar software (such as: two ** devices, two QQ, or multiple browsers, multiple anti-virus software, etc.)! They are not "compatible" together, remove the "redundant" one!

4.You can find "Force uninstall software from your computer" in the "Start" menu in the bottom left corner of your computer, and find the excess one to uninstall! After unloading, "strong cleaning" (unload when you see it, don't unload it usefully).

5.The computer boots up for too long, the CPU memory is overheated, the heat dissipation is not good, the graphics card and memory module are not firmly plugged in, it is recommended to unplug it and wipe it with a rotten eraser or dry paper (cloth)!

6.Restart the computer, press "F8" after booting up, enter the "Hunger Rock Sleepy Full Mode", find the "Last Correct Setting", press down, and try!

8.If you really can't do it, "restore the system" or "reinstall the system"!

If this is an "accidental" or "boot and off" blue, it is likely that the "software" needs to be "upgraded" (note: "winrar" can also not be upgraded!). Or "system poisoning"!

x0000008e:kernel_mode_exception_not_handled

Error Analysis: A kernel-level application produces an error, but the Windows Error Processor does not capture the crash. It's usually a hardware compatibility error.

Solve the case of Fang Yuxiang: upgrade the driver or upgrade the royal annihilation BIOSIt is also recommended to replace the memory module.

o(∩_o...

0x000000f4 (0x00000003, parameter2, parameter3, parameter4)

Stopped parameter2, parameter3, and parameter4 in the error may be different.

0x0000007e:system_thread_exception_not_handled

System processes produce errors that cannot be caught by the Windows Error Processor for a number of reasons, including: hardware compatibility, problematic startup programs or system services, or some software.

Step 1: Check the Disk Space If this problem occurs for the first time during the Windows installation process, it may not be enough hard disk space to run Windows.

Step 2: Blos are not compatible. If this issue occurs after the first reboot during the Windows installation process or after the installation is complete, it may be that the BLOS is not compatible with Windows, please level to the latest BIOS.

Step 3: There are incompatible hardware drivers. If the name of a driver is listed in the STOP error message, disable or delete the driver.

If an error occurs during the boot process, you will need to enter safe mode to rename or delete the driver you asked for. If you can't enter safe mode. You'll need to go to the Recovery Console with the installation CD and rename the file.

Hello! The reasons for the blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. Recommendations:

1. Try to restore the BIOS to its factory state first;

2. If there is any virus in the system, it is recommended to scan and disinfect in safe mode;

3. Is the driver of the hardware installed successfully after reinstalling the system?

4. It is best to reinstall the operating system first;

5. If there is still a problem after reinstalling the system, it is very likely to be caused by hardware incompatibility;

6. Consult with the merchant or friends who are familiar with the computer, maybe they will help;

7. Good luck!

0x0000008e:kernel_mode_exception_not_handled

Error Analysis: A kernel-level application produces an error, but the Windows Error Processor doesn't catch it. It's usually a hardware compatibility error.

Solution: Upgrade the driver or upgrade the BIOS

0x0000008e:

Error Analysis: A kernel-level application produces an error, but the Windows Error Processor doesn't catch it. It's usually a hardware compatibility error.

Solution: 1. Check whether the memory is plugged in tightly, and whether the quality is problematic or incompatible.

2. Change and upgrade the drivers of the graphics card, sound card, and network card.

3. Please install the system patch.

4. Antivirus.

Official 0x0000008e Solution:

If it is a Windows XP system, please install the SP2 patch or higher If it is a Windows 2000 system, please install the SP4 patch.

Did you install a certain software, but if it did?