What s a great way to open a beer bottle without using a corkscrew at all?

Lighter. Lighters are one of the commonly used corkscrews, and beer bottles can also be opened with a lighter, that is, use the bottom of the lighter to press the beer bottle cap, and then break it hard, and it can be opened.

Pair the bottles that touch each other.

If the technique is good, you can put the two bottles head to head, cap to cap together, one up, one down, and then both are clamped tightly, pull hard, you can open the beer bottle cap, everyone can try.

Sharp teeth.

Many people usually choose to bite it open with their teeth when they don't have a keiko at hand. Remember, when biting, never have front front teeth, and try to bite the bottle cap to the back teeth, so as not to hurt your teeth. When biting, don't bite hard, and when you can't bite open, you can change the angle of the bottle and bite again.

Newspaper. After simple processing, the newspaper can also be opened. The newspaper is folded repeatedly into thin strips and then folded in half to create a stiff corner.

Using this angle, the cap is lifted by means of a lever. If it is difficult to pry open the entire cap at one point, you can pry around the cap in multiple places until it is successful.

After reading the above introduction, how to open beer without a corkscrew? In addition to the above methods of opening the cap of beer bottles, there are also tables, stools, chopsticks, and in the absence of a bottle opener, you can find a temporary tool instead, using the principle of a crowbar to open a beer bottle. Snap the tool under the mouth of the bottle with one hand, jam it and pry upwards until the beer cap is opened.

Today, I found out that it is so simple to open the beer bottle cap, and you can open it with your bare hands, and the method is really powerful.

Knocking something hard against the cap will knock it off.

You can pry it open with your teeth, and there are many hard objects that do.

Bite with your teeth or use chopsticks.

With chopsticks, with teeth, with other hard things.

Two bottles of beer can hook each other.

This can be opened with chopsticks.

It's okay to pry it open with your teeth.

Aren't there folders, chopsticks, and so on on the Internet now?

There are also a lot of hard objects that do.

How to open beer without a corkscrew:

1. Open the lid of the beer on the barbed wire.

This method of opening the lid of beer is rare, after all, there is no such device in restaurants.

2. Use the ring to open the beer lid.

As long as the ring ***, use the edge under the ring to fit the beer cap, and then lift it up vigorously to open it, it is recommended not to use a valuable ring.

3. Open the beer lid with an iron basin.

Simply snap the beer lid on the rim of the tin basin and press down firmly with the palm of your hand to open the beer lid perfectly.

4. Use the key to open the beer lid.

This method is rarely used by people, and it is difficult to open, so it needs to be repeated many times. The gods who usually use the key to open the lid of the beer are generally the ones who don't want to go home.

5. Use a belt buckle.

As long as you don't drink too much, you won't use this method, and the people who use this method are basically full of food and drink.

5. Use the plug to open the beer cap.

This pays attention to quality, if the quality is not good, not only the beer cover can not be opened, the mobile phone charging plug will be broken, which is more important than the beer and the charging plug, you weigh it.

6. Use a rubber band.

Wrap the rubber band firmly under the beer cap, then rotate it firmly while pushing it in the direction of the beer cap, and after rotating and pressing, the beer cap will jump out.

7. Use a lighter to open the lid of the beer.

Needless to say, this method is basically known to everyone, but it is easy to leak the lighter, so it is not recommended for everyone to use it.

8. Use a lighter to burn the cap of the beer bottle.

This needs to be paired with a screwdriver, so that the sound of the cap is louder when it jumps up, and it is easy to open. Using a screwdriver alone, it is more laborious.

9. Use the back of the knife.

This is generally used in the hot summer, because of the existence of watermelon knives, whether it is a screwdriver or a knife handle, as long as it is a hard and angular item can open the beer lid.

10. Use a spoon.

Before the waiter could bring the corkscrew, all of them were ready to fight, and the spoons on the table suffered, the iron ones became crooked, and the porcelain ones were overwhelmed, and many of them were bent over. Only the stainless steel spoon remains intact.

I'm sure you're very troubled when you drink without a corkscrew. It's okay, I'll show you 10 small ways you don't need a corkscrew, so let's take a look.

01 Drawer handles. Clamp the cap on the handlebar. Press the bottle slightly, and it opens. You don't have to push hard.

02 Hold the key head under the cap with your hand and rotate the key upwards to loosen the cap. Try a few more times and you'll be able to open it.

03 Hold the neck of the bottle with your left hand in a normal holding position, and your index finger is under the cap. Hold the chopsticks in your right hand and insert the end of the chopsticks between the cap and index finger to firmly hold the bottom edge of the cap. With the index finger against the chopsticks as the fulcrum, the right hand is pressed down, and the simple lever principle makes it easy to open the cap.

04 Place the edge of the spoon under the lid, pry the spoon firmly upwards, and try a few more times to open it.

05 It may seem impossible, but it can be done. Fold your paper towel several times and pry it open under the cap. (Great God Level).

06 Open the scissors, place the cap between the two blades, jam them and press upwards to make the cap come off.

07 Hold the neck of the beer bottle with one hand, leaving room just enough to place the lipstick between the cap and your index finger holding the bottle. Now use your other hand to top up from the other end of the lipstick.

08 The two beers are facing each other, the bottle caps are hooked together, the left hand holds the caps of both beers, and the right hand presses down on the upper beer (don't lift it up in vain and try to hook it directly, it is easy to spray everywhere).

09 Tilt the beer bottle slightly. The edge of the cap is buckled to the edge of the door frame, find a good angle to apply pressure, and pay attention to the force.

10 Place the cap on the edge of the tabletop, find a good position to stabilize the stuck, use your hand hammer to the cap, so that the edge of the cap is stressed and bounce upward, and the mill can be opened.

You can also use a spoon to open the cap, the bigger and harder the better, the tip of the spoon is aimed at the bottom of the cap, the other hand holds the mouth of the bottle, pry up hard, and apply force slowly, you can open the cap. The belt buckle is also an artifact for opening the cap, aiming at the end of the cap and priing the cap open. If you use that kind of pin-buckle belt, then you can't.

Using the interaction force of the two caps, the bottle body is leveraged. The cap can be opened. However, it should be noted that the cap to be opened can only be opened with the mouth facing up.

Fold it with a piece of paper, the thicker the better, and fold it several times into a hard strip. The edges and corners are close to the serrated teeth of the cap, and the left hand holds the neck of the beer bottle, the thumb pads the hard strip, and the right hand is firmly cocked to open the cap.

Hold the key head under the cap with your dominant hand and rotate the key upwards to loosen the cap. You may need to rotate the bottle a bit and repeat this action until the cap falls off completely. Hold the neck of the beer bottle with one hand, leaving room just enough to place the lighter between the cap and your index finger holding the bottle.

Now use your other hand to push up from the other end of the lighter until the lid is released and falls.

The cap can also be opened with scissors. Use a pair of steel scissors that are strong enough, keep a parallel and slightly biased posture, hold the scissors steadily, aim at the small bulge of the bottle cap to cut, slowly turn the circle to cut, and the third push of the scissors can push the cap away.

Use a dining table or a brick, or any table top with contoured edges. Place the cap position on the edge of the tabletop, the position is stable and stuck, and then use your hand or a heavy object to hammer the cap downwards to make the edge of the cap bounce up after being forced, and open it successfully.

It's also easy to open the cap with a fork. Place the tines against the cap grooves and pry them upwards one by one. The cap can be easily opened.

You can pry the cap open with the bottom of the bottle while holding the neck of the bottle with your fingers. You can also use the principle of thermal expansion and cold contraction to burn the cap with a lighter, and then unscrew the cap by hand, but wrap the cap with a paper towel or towel to avoid burns.

We've seen this tool used more than we ever imagined. While this may seem like an old-fashioned approach, it works. All it takes is a little trick:

Turn the first bottle upside down and use the edge of its cap to pull the cap from the other bottle. Hold both bottles firmly and steadily.

For a metal spoon or fork, simply place the edge of the spoon under the lid and pry the spoon firmly upwards until the cap opens. Alternatively, you can hold the end of the spoon handle and pry the cap open. door frame, you need to tilt the beer bottle slightly to match this work.

Snap the edge of the cap against the edge of the door frame and apply pressure at the right angle so that the cap is pried open by leverage.

Method 1: Lighter corkscrewUse a lighter to heat the edge of the bottle cap, bake it around, according to the principle of thermal expansion and cold contraction, the bottle cap will automatically separate from the bottle body, so that there will be signs of loosening, and then find a dry cloth, twist it hard, and the bottle cap will be unscrewed.

Method 2: Chopsticks bottle openingIt is also very common to pry the thicker end of the chopsticks under the cap and then use the thumb as a support point so that with a little force, the cap can be opened.

Method 3: Bench table corkscrewDirectly put the beer bottle on the edge of the bench or table, and then press down with the palm of your hand, you can easily open the bottle cap, here is the use of force is mutual, the next force will react up, this principle can be used in life.

Beer without a corkscrew opening method:1. Lighter bottle opening method: use a lighter to heat the edge of the bottle cap, bake a circle, according to the principle of thermal expansion and cold contraction, the bottle cap will be automatically separated from the bottle body, so that there will be signs of loosening, and then find a dry cloth, twist it hard, and the bottle cap will be unscrewed.

2. Chopsticks bottle opening method: pry the thicker end of the chopsticks under the bottle cap, and then use the thumb as a support point, so that with a little force, the bottle cap can be opened, this method is also particularly common.

3. Bench table corkscrew method: directly put the beer bottle on the edge of the bench or table, and then press down with the palm of your hand to easily open the bottle cap.

If you don't have a bottle opener, you can open the cap with the help of a lighter, chopsticks, spoon, etc., or you can open it with the corner of a table or a chair.

1. To open a beer bottle with a lighter, you first have to find a lighter, hold the beer cap, and hold the neck of the bottle with the other hand, and use the lighter to pry open the beer bottle.

2. When opening the beer bottle with chopsticks, first hold the neck of the beer bottle with one hand, and hold the edge of the chopsticks with the other hand against the groove of the beer cap.

3. Spoon to open the beer bottle, it is best to use a stainless steel spoon, hold the spoon handle with one hand against the groove of the beer lid, and fix the bottle with the other hand, you can pry it open.

4. Place the beer bottle on the edge of the table or chair, press the corner of the bottle cap, and shoot it down with your hand, and the bottle cap will fly out and open by rubbing.

Precautions for the use of beer bottle openers

1. Pay attention to safety: In the middle of using the beer bottle opener, you must pay attention to safety to avoid accidentally injuring yourself.

2. Keep the face away from the bottle cap: After opening the wine bottle cap, the face must be far away from the position of the bottle cap, the force of the beer bottle opener will make the bottle cap bounce up, resulting in the bottle cap bullet injury**.

3. Excessive hand strength: It is necessary to avoid excessive hand strength and cracks in the beer bottle, so it is necessary to use the bottle opener safely to be happier when drinking.

Rubbing the handle hot can open the cap and put pressure on the bottle, which is the increase in pressure in the bottle and squeezing the cap, so it is easy to unscrew.

When it comes to beer, many people will think that there is a place where beer is very delicious, that is, Tsingtao beer in Shandong, Shandong beer in plastic bags, **cheap, you can walk away when you mention it. No, summer is here again, and the night market is gradually becoming lively, and many friends have begun to eat barbecue, and have begun to play skewers and drink beer again.

There are many ways to open the cap of a beer bottle, in addition to using a regular bottle opener, many friends will choose to bite with their teeth, it is easy to gnaw their teeth, or use the table as a bottle opener. In fact, the method of opening the beer bottle cap is very simple, we can take a closer look at the beer bottle cap, it is not difficult to find, because there is a small mechanism on the beer bottle cap.

Rub your hands together to warm up the beer bottle magic method:

Necessary materials: beer, napkins, lighters.

1. Prepare a bottle of beer.

2. Before opening the beer bottle cap, you can use our commonly used lighter to aim at the bite of the bottle cap and heat it for 10 seconds.

3. After the time is up, click a paper towel or a small rag, and then twist it with your hands while it is hot, and the beer bottle cap can be easily removed, this method is to use the principle of metal "thermal expansion and cold contraction", so that the wine bottle cap is heated and expanded, and the bite between the bottle mouth becomes loose, as long as it is slightly loose, it is very easy to unscrew it.