Why does the Lenovo P700 mobile phone always start up the screen after it is turned on, how to flash

It is recommended that the battery be re-seated before trying to boot, if it is still abnormal, please send it to the repair site for specific testing and treatment in time.

Because there is a certain risk of flashing the machine by yourself, and it may affect the normal warranty of the device. Therefore, we do not recommend flashing it yourself.

1.It is recommended to remove the back cover and battery, and try to restart, if it can enter normally, it is recommended to back up the body data for a factory reset attempt (ps: remember to back up the data before operation to avoid personal data loss);

2.If the above operations cannot be improved, it may be caused by abnormal system files or data loss on the device motherboard, and you need to flash and check the device. Due to the risk of flashing the machine and may lead to non-insurance, it is recommended to take the time to go to the maintenance station to be assisted by an engineer to test and deal with it.

The solution to the phone not turning on is as follows:

1. Charge the mobile phone first, and rule out whether there is a problem with the battery, data cable, and charging head, which causes it to not be charged;

Second, if the above are good and you can't turn on the phone, you can only restore the phone to factory settings;

1. Turn off the phone completely;

2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

3. After entering the recovery mode, you can choose to restore factory settings, whether your phone is the recovery that comes with the system or the recovery of a third party, as long as there is [wipe data factory reset];

4. Select [Wipe Data Factory Reset], then press the boot button to confirm, and then select [yes - delete all data].

5. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

3. If you do not turn on the machine after restoring the factory settings, it is recommended to send it for after-sales warranty.

Please read the trade-off carefully before flashing, if you can't handle it yourself, please take the time to go to the Lenovo repair station to deal with it.

Official website authorized maintenance site inquiry:

Hello. If you don't know how to brush, don't brush randomly. I can help you get it right, but we're paid for it.

It has been painted into bricks by you, and it is brushed from the new one, and let the after-sales service brush for you.