-
QQ farm can't open the solution 1: open the browser, at the top you will see Tools-> folder options-> and then delete cookies Tick the hook, delete the file Tick, select Delete all offline files, and then click OK, and then refresh once, it should be OK, if it doesn't work again, you can disable the local connection, and then enable it, if the network speed is not very bad, it may be fine immediately.
QQ farm can't get into the solution 2: First of all, you have to confirm whether you have installed the plug-in of the flash machine, because the QQ farm needs the support of the flash player to enter, if not, please enter: After the **flash** device, you can enter the QQ farm by re-opening it.
Solution 3 for QQ Farm Can't Get In: Are You Sure You Are You Banned? If the above situation occurs, it may be that you are frozen, and it will be automatically thawed after three or four hours, and you can continue to use it.
In the past, it was said that this situation was due to the use of auxiliary tools (such as lazy babies, QQ farm mates, etc.), and now the latest statement: you collect and steal vegetables too fast! So Tencent suspects you of using auxiliary tools to disrupt the balance and freeze you first.
Solution 4 of QQ farm can't be opened: it may also have browser and network problems! You can try it separately, you can see if it's a problem with browsing, but I estimate that most of it is a problem with the network, the network you use may not be very smooth, or it may be busy at a certain time, if you have more than two computers in that place, you can try whether other computers are the same, and then the problem will be understood.
The last most common problem is Tencent's upgrade and maintenance, very often, in addition to the above points, there are almost no other reasons, so we should pay attention to the announcement of QQ farm bar in time and keep abreast of relevant developments.
145: Domestic Mango - Grade IV.
-
Remove the battery and reinstall the card.
-
If you encounter the problem of your phone automatically shutting down or restarting, you can try the following:
1.Press and hold the power button to open the options menu, select "Restart", if you can't open the options menu: press and hold the power button until the phone vibrates to force restart.
2.If the automatic shutdown or reboot still occurs after restarting, it may be due to some third-party apps that are not compatible, and it is recommended to restore the phone to factory settings after backing up important data.
3.If you are unable to operate your phone, please upgrade your phone. After the upgrade, the data in the internal storage of the phone will be deleted, please go to the software address on the Huawei official website, and refer to the upgrade guide in the software update package according to the model number software update package.
If the problem persists, please bring the purchase invoice to the service outlet for maintenance.
It is recommended that you back up the data in your phone in advance and bring the warranty certificate to the nearest customer service center for repair. The following describes how to query the address information of the Huawei Customer Service Center:
2. You can also have an after-sales outlet query address entrance at the bottom of the official website page of Huawei**;
-
Let's restore the factory.
Press and hold the volume up button + + power button for a period of time in the shutdown state, and enter the recovery interface after the Huawei logo is displayed. Move up and down in recovery and use the hand volume side button to control it and confirm that it is the power on button. Select "Wipe Data Factory Rest" (Move the volume button up and down, Power on button to confirm.) Below appears a row in English !
no 。。yes--delete all uesr data: select "yes--delete all uesr data" and press the power button.
Wait for reset. It can be a bit slow to boot up for the first time.
Manual power off, power on, OK.
-
Flash the machine and try it... It is recommended to brush the official version first.,After brushing, see if there are any problems.。 Go to Huawei's official website to find the firmware package of C8650,**,Unzip it,Put the dload folder inside to the root directory of the SD card,Turn off the phone,Press and hold the volume up and down keys at the same time,Press and hold the power button again,Start flashing,It's OK when it's over。
-
There are several reasons why your phone restarts:
1. The reason of the mobile phone software itself: Because after the mobile phone is turned on, many background programs will run, at this time, due to the defects of the software itself in memory management, resulting in improper memory use, at this time, the machine will restart. This is a software issue and the software must be upgraded.
2. Reboot due to mismatch between hardware and software.
Check the relevant spec and product information to see if the software supports the hardware version.
3. Battery failure will also lead to this situation, try replacing the battery.
4. It is also possible that the battery and the mobile phone are in poor contact, and a small piece of paper is stuck at the end of the battery without contact head, if it is not good, pull the two metal heads in contact with the battery with small tweezers to make it contact well. (It may be that the elasticity is not good, just pull it out moderately).
5. Press and hold the volume up, volume down, and shutdown buttons in the shutdown state, and let go when the boot screen appears, and you can enter recovery. Go to Recovery >Chinese >> Clear Data >> Erase all data).
Select Chinese Simplified and confirm, volume key select Power key confirm, select Will install to system and confirm.
Select Confirm, wait for completion, and select Restart to system to enter the new system.
In addition, such as operation error, poor contact of mobile phone card, weak signal and unstable current and voltage. But this is only some external reason, not a real reason. If the problem cannot be solved, it is recommended to send it to the after-sales service.
-
It may be that the machine is overheating, and the chip is soldered, if you can occasionally open it or let it go for a while, I think it is the chip soldering.
-
Maybe it's a file that shouldn't be deleted.,Can you still enter the rec.。
-
Whether you recently installed or updated 360 software, 360 Phone Guard software, or rooted your phoneIt has been found that using King Root and the 360 Super Root tool in 360 Security Guard can cause this issue when rooting the phone.
Please bring your purchase receipt to the Huawei Customer Service Center for testing and processing.
It is recommended that you uninstall the 360 software and restart your phone to see if the problem is resolved. When the animation begins to appear after the first screen is displayed after the boot display, press and hold the [Volume Down Button] to enter the safe mode, uninstall the 360 and other software in the safe mode, and the words "safe mode" will be displayed in the lower left corner of the phone when entering the safe mode. After entering safe mode and exiting, the desktop icons will be cluttered and you will need to adjust them yourself.
-
It may be that the home screen was accidentally uninstalled by you.
So the system won't turn on.
Take it to the store and try it.
-
It may also be fine to take out the phone battery and wait a while before installing the battery.
-
Send it for repair yourself, don't mess around.
-
ROM is corrupted.
Just flash it again.
-
Accidental deletion of software on Huawei mobile phones may cause frequent crashes, +q314649251, I have been playing Huawei mobile phones for a long time, and I am familiar with the performance.
-
The next official ROM,After unzipping, put the dload folder into the memory card,Red hang-up button + volume button + boot button,Flash the official website at the beginning。