The main driver of Ma Liu can t control the lifting of other glasses

Reason: The window lock function key on the back of the switch is turned on. Workaround:

The first step is to open the door on the driver's side of Horse No. 6.

The second step is to step on the brake pedal track of Horse 6.

Step 3: Press the one-button start button of mount6 to start the engine.

Fourth, the dashboard lights up, proving that the engine of the Ma6 has started.

Step 5: Press the button in MAP6 to solve the problem.

Mazda 6 Mazda 6) is the latest product launched by Mazda Corporation in the 21st century, a mid-to-high-end sedan launched at the Tokyo Motor Show in 2001. Since its launch, it has won more than 30 awards in 20 countries around the world.

On April 10, 2003, Mazda6 came to China, with its extraordinary appearance and handling, won the title of "King of Corners" in the car of the year, and has maintained a strong sales trend, its dynamic interior shape, excellent handling, high standards of safety, wide interior space and fine workmanship, etc., to create a new global standard for high-end sedans in the 21st century.

You've cut off the power, you go to each glass, you go up and you don't give it away, you press it for 3 seconds, you hear a tick, and every one of them is like this.

The failure of the left rear window is a switch failure, and the switch can only be replaced. The power window system is composed of windows, window regulators, motors, relays, switches and other devices.

Notes:

1. The reason why the electric opening and closing of the window is not smooth is that the oil in the elevator inside the door is exhausted, and the inner cover should be removed and oiled.

2. If the glass cannot operate at all, it may be a switch failure. If it is a fault of the switch, it can only be replaced.

3. If the electronic device does not work, check the fuse.

It's general common sense. Double-check which fuse is for the power window.

4. When the operation of the switch deteriorates and the window cannot be opened smoothly, the possibility of the switch failure is very high.

There are two possibilities that the driver's seat cannot control the lifting of other windows: one is that the program set by the driving computer is messy, which can be reset by the computer, and some cars can be set manually, but I am not familiar with the horse 6 and will not tell you the method; The other is the quality of the main switch in the driver's seat, which is replaceable!!

Your car has only run 8700km, which is within the warranty period, and you can go to the local 4S shop for maintenance and claims.

I am a 4S store for after-sales, I hope to help you, hope to !!

If you run away, you can go to the nearest 4S store to deal with it, or call ** to consult the staff of the 4S store.

The window glass can't be lifted, the switch is fine, the wiring is fine, the motor is fine, sometimes it can be used, sometimes it can't be used, and when it can't be used, the relay doesn't respond. When I can use it, I press down the gap to rise, and I cannot go down.

Three common fault causes and maintenance methods of automobile glass regulators:

1. Abnormal sound of glass vibration. This indicates that the glass regulator screw may be loose, and the solution is to tighten the regulator screw;

2. The glass regulator is stuck. This failure may be caused by deformation or damage to the glass mud groove and loose fixing screws of the lifter.

moving, guide rails. Deviation of the installation position or damage to the glass regulator. The maintenance method is mainly to clean and replace the glass mud tank or loosen the glass.

Glass mounting screws to adjust the position of the glass.

3. All glass regulators cannot work. The cause of this failure may be the detachment of the tie wire of the combination switch and the total power supply.

Wire detachment, poor relay contact, damage, or lockout switch poor contact or not closed. The repair method is to overhaul the circuit. Hand.

The principle of the window stirring is that there is a gear in the center of the handlebar, and the glass lifting linkage mechanism.

There is also a curtain of knife-shaped chainrings on it, which only needs to be rotated once.

The grip and gear drive the chainring, which will make the glass go up and down a specific track. Nowadays cars are using electric windows, and electric windows only.

However, the crank part is changed to be driven by an electric motor, and the direction of the current is controlled by the switch to change the direction of the motor.

toward, let the glass window rise. One of the most important responsibilities of the glass window in the car is to protect from the wind and rain, so in the glass frame.

There are rubber seals on all sides, so that the glass can be close to the body, to achieve the function of wind and water resistance.

Glass regulator is a lifting device for automobile door and window glass, which is mainly divided into two categories: electric glass regulator and manual glass regulator.

Now the lifting (closing and opening) of many car door and window glass has abandoned the manual lifting and lowering mode of rocker type, and generally change to the electric lifting mode of button type, that is, use electric glass regulator. The electric glass regulator used in cars is mostly composed of electric motors and reducers.

Guide rope, guide plate, glass mounting bracket, etc. The general switch is controlled by the driver, the opening and closing of the whole door window glass, and the sub-switch on the handle of each car door is controlled by the occupant respectively, and the operation is very convenient.

Summary. Hello, Mazda main driving switch can not control the left rear glass, there are two situations, the first left rear glass switch problem, need to be replaced, the second main driving glass switch to the left rear glass switch wiring harness failure, mainly check the door side wiring harness This is easy to have problems.

I will answer your questions attentively, carefully and attentively, and find the corresponding problem solutions and solutions for you! Appearing mine is not the result you want. You can continue to ask me questions, and you need to describe the question in more detail so that I can provide you with more accurate information.

Hello, Mazda's main driving switch can not control the left rear glass, there are two situations which draft, the first left rear glass switch problem, needs to be replaced, the second main driving glass switch to the left rear glass switch wiring harness failure, mainly check the door side wiring harness This is easy to have problems. I will answer your questions attentively, carefully and attentively, and find the corresponding problem solution and solution to Li Fan's filial piety for you! Out of the sedan to celebrate mine is not the result you want.

You can continue to ask me questions, and you need to describe the question in more detail so that I can provide you with more accurate information.

Summary. Hello, solution: 1, check the circuit diagram, there is a button on the master control to prevent the window from lifting, after pressing, the three window glass can not be lifted, simply put, it is to break the circuit of the rest of the window glass lifting motor, this button is pressed down, power off, press it again, bounce up, and turn on the power supply.

2. There are too many accumulated sundries and garbage slag, such as small cards stuffed by the car window, etc., resulting in stuck, in this case, you only need to go to the repair shop to remove the car door. 3. When the street ignition switch is closed, the door and window relay is electrocuted and closed, the electric door circuit is connected with the power supply, the combination switch or sub-switch is connected to the "upper" position, the current flows through the door and window motor, and the motor rotates to drive the lifter to make the door and window glass rise; The combination switch or sub-switch is connected with the "down" position, and the current flowing through the door and window motor changes the direction, and the rotation direction of the motor changes, and the lifter drives the door and window glass to fall. When the door and window glass rises or falls to the end point, the disconnect switch is cut off for a period of time and then returned to the connected state.

4. The circuit of the window regulator is aging or short-circuited, resulting in the failure of the buttons. 5. If there is a problem with the lifter itself, this must be replaced, and it is recommended to go to the 4S store to replace it.

The main driving glass of the horse 6 can be raised and lowered, and the other three buttons, the button button light is not lit, and it cannot be lifted.

Hello, solution: 1, check the circuit diagram, there is a button on the master control to prevent the window from lifting, after pressing, the three window glass can not be lifted, simply put, it is to break the circuit of the rest of the window glass lifting motor, this button is pressed down, power off, press it again, bounce up, and turn on the power supply. 2. There are too many accumulated sundries and garbage slag, such as small cards stuffed by the car window, etc., resulting in stuck, in this case, you only need to go to the repair shop to remove the car door.

3. When the street ignition switch is closed, the door and window relay is electrocuted and closed, the electric door circuit is connected with the power supply, the combination switch or sub-switch is connected to the "upper" position, the current flows through the door and window motor, and the motor rotates to drive the lifter to make the door and window glass rise; The combination switch or sub-switch is connected with the "down" position, and the current flowing through the door and window motor changes the direction, and the rotation direction of the motor changes, and the lifter drives the door and window glass to fall. When the door and window glass rises or falls to the end point, the disconnect switch is cut off for a period of time and then returned to the connected state. 4. The circuit of the window regulator is aging or short-circuited, resulting in the failure of the buttons.

5. If there is a problem with the lifter itself, this must be replaced, and it is recommended to go to the 4S store to replace it.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

Summary. Hello, the main driver of Ma Liu can't control the right front door lifter with the right front door can be lifted and lowered The setting does not work Reason: The lock window function key on the rear side of the switch is turned on. Workaround:

1 Open the door on the driver's side of Horse 6.

2.Step on the brake pedal track of horse No. 6.

3 Press the one-button start button on the mount6 to start the engine.

4 The instrument panel lights up, proving that the Ma6's engine has started.

5 Press the button in MAP6 to solve the problem.

Ma Liu's main driver can't control the right front door lifter with the right front door can be lifted and lowered It doesn't work, ask for advice.

Hold on. Hold on.

Hello, the main driver of Ma Liu can't control the right front door lifter with the right front door can be lifted and lowered The setting doesn't work The reason for the reason: the lock window function key on the rear side of the switch is opened. Workaround:

1 Open the door on the driver's side of Horse 6 2Step on the brake pedal track of Horse 63 Press the one-button start button of Mount 6 to activate the engine4 The instrument panel lights up and liquidates, proving that the engine of Horse 6 has started5 Press the button in MAP6 to solve the problem.

Summary. Hello, I am your car master exclusive mechanic at your service. Here's a great day. The Year of the Tiger is auspicious. We promise to be attentive, careful and attentive to solve your car troubles. Provide you with fault solutions and repair methods for your car.

Hello friend, when you are the main door of Ma Liu, sometimes you can't control the right rear glass door. This fault phenomenon is generally caused by the poor internal contact of the main driver's door glass lift switch. To solve this problem, the main driver's door switch must be replaced first.

Replace the switch first, and the contact inside the switch must not be able to contact sometimes. As a result, the signal cannot be entered. Can't control your left rear door glass lifting friend.

Hello, I'm your car master and the orange technician is at your service. Here's a great day. The Year of the Tiger is auspicious.

We promise to be attentive, careful, and dedicated to solving your car failure. Provide you with grip failure solutions and repair methods for your car. Hello friend, when you are the main door of Ma Liu, sometimes you can't control the right rear glass door.

This fault phenomenon is generally caused by the poor internal contact of the main driver's door glass lift switch. To solve this problem, the main driver's door switch must be replaced first. Replace the switch first, and the contact inside the switch must not be able to contact sometimes.

As a result, the signal cannot be entered. Can't control your left rear door glass lifting friend.