How to adjust the CPU frequency maximization

Generally, the frequency of the computer CPU is fixed, and modifying the frequency of the CPU is to overclock the CPU. The steps are as follows:

Turn on the computer, enter the BIOS, in the CPU options, there will generally be a position that supports overclocking, which is a set of numbers, for example, the default external frequency of the CPU is 200MHz, then 200 will be displayed in this position, and you can choose to change this external frequency at this position. If the external frequency is increased, the frequency of the CPU will increase, and the purpose of overclocking will be achieved.

It should be noted that when overclocking the external frequency, it should be exceeded little by little, for the first time, you can first adjust it to 205 external frequency, and then restart it to see if the system is normal, if it is normal, and then come back, adjust to 210, if it is normal and then adjust, so adjust the external frequency again and again, until the system can not start normally when adjusting to a certain number, then add voltage to it, and add it little by little, otherwise it may burn out. The first voltage to be added, restart to see if it can be restarted normally, if it can't be restarted, it is the overclocking limit.

CPU heat dissipation is also very important, if the heat dissipation is not good, not only is it super low, but it may also burn out the CPU. So be sure to have a fan with good effect, and if necessary, you can cool it with water to dissipate heat.

After the CPU exceeds the external frequency, the frequency of the memory will of course also follow. Therefore, many times overclocking is unsuccessful.

Often it's not the CPU physique problem, but the memory problem. When overclocking, as long as the PCI-E is locked at 100, then the graphics card will not follow. If the PCI-E does not lock up when overclocking the CPU, it will cause the graphics card to burn out.

How much memory can be exceeded depends on the physique. A good physique can exceed 1500, and if the memory is a dual-channel double bar (not a suit), it is difficult to overclock. Unless it's a suit, or it's better to use a single channel of memory.

Modify the CPU throttling frequency to make your Xiaomi phone run more smoothly.

<> Control Panel - Power Options, there are three options: balanced, energy saving (reducing performance to save power), and high performance with additional plans. You can also set other details according to your own needs, click to change the plan settings one by one, change the advanced power settings one by one, you can set how much time to turn off the display signal output and whether the computer sleeps automatically, if you don't need it, then choose never, you can also adjust the working state of the processor, the system generally chooses the "balance (recommended)" option by default, the minimum state of the processor is 5% by default, and the maximum state is 100%. It means that when working under high load, the processor operating frequency is the maximum standard frequency!

In general, the processor works at the lowest allowable frequency to reduce power consumption and save energy.

If the computer is required to work at a fixed frequency, the minimum and maximum states can be set to the same percentage, such as set to 100%, then the processor will start to work at the highest frequency state from the start-up, and give full play to the maximum performance, of course, this seems to be a bit wasteful, so you can reasonably set the minimum and maximum processor states according to your needs. If the computer configuration is low, it is natural to set 100% to improve the efficiency of the processor, and if the computer configuration is good enough, and it is not to play any games, just for office use, then it is enough to set 60%.

If the processor shuts down due to high temperatures, you can consider lowering the maximum percentage of the processor to cool down the processor after confirming that the heatsink and silicone grease are normal.

It is normal for the current operating frequency to be different from the nominal value, or it may become if you look at it again. There are slight discrepancies when not overclocking by default. Bigger when overclocked.

This CPU can't achieve automatic frequency reduction, because the desktop does not have high requirements for power saving, and more importantly, performance. Currently, some desktop CPUs, such as AMD's 64-bit CPUs, can be automatically downclocked and need to be set in the BIOS.

When the processor is working, there should be a certain upper limit on the working frequency, so we should pay attention when using it, if it is operated at the same time, it will cause lag.

The body's capacity can be adjusted as needed, so that these problems can be improved according to some of the body's wear and tear consumed.

1. Click the system start menu button to open the start menu. Click to enter the Control Panel. As shown in the figure below:

2. Enter the system control panel. In the Control Panel, find Power Options. Click the Power Options option settings. As shown in the figure below:

3. In the power option settings, we can see that the system is preset with three power schemes, namely balanced, energy-saving and high-performance. Power planning can help improve computer performance or energy efficiency. Activate it by choosing a plan, or choose a plan and customize it by changing its power settings.

As shown in the figure below:

<>5. In the power plan settings and interface, you can set the sleep settings and display settings of the computer. We can also change the advanced power settings. Click Change Advanced Power Settings to enter the system advanced power settings interface. As shown in the figure below:

6. Click Processor Power Management in the Settings option to turn on the CPU frequency setting. You can see that the processor frequency is 30, which can be modified according to your needs. After modifying, click [Apply] below.

1. Click the system start menu button to open the start menu. Click to go to the Control Panel.

2. Enter the system control panel. Locate the power options in the Control Panel. Tap Power Options to go to Power Options Settings.

3. In the power option settings, we can see that the system presets three power plans, which are balanced, energy-saving, and high-performance. Power plans can help you compare your computer's performance or save energy. Activate it by selecting a plan, or choose a plan and customize it by changing its power settings.

4. The system is currently using a balancing plan. We click Change Plan Settings on the right side of the Power Balance Plan to open the Power Plan Settings screen.

5. In the power plan settings interface, we can set the sleep settings and display settings of the computer. We can also change the advanced power settings. Click Change Advanced Power Settings to enter the system advanced power settings interface.

6. Click Processor Power Management in the settings options to turn on the CPU frequency setting of the computer. Set the processor relatively small state to use a processor frequency of 30. Once you're set up, click on the app to make your computer smoother.

1. First find the control panel.

Open the Control Panel and turn on this power option.

2. There are three modes, take the high-performance mode as an example (the other two modes also have the same steps), click to change the plan settings.

3. Then click Change Advanced Power Settings.

4. Select the processor, in turn, turn on the maximum processor state, and it is this value that limits our limit.

5. Set these two data to 85% respectively, and the processor has the highest turbo frequency.

For,Limit the maximum performance to 85%After the maximum turbo frequency is about 2GHz,At this time, you can't feel any difference when playing games,But the temperature has dropped,For those who don't dissipate heat,This method can effectively reduce the CPU high temperature problem。