How can two computers transfer large files to each other?

The first method is a bit complicated, if you find it troublesome, use the second one.

First: Share the partition of a machine that finishes the game, pay attention to the shared name, and it is best to write it as a drive letter, such as an E drive.

Then start ->> run ->> cmd on the game's machine, and run command if you don't have this command

Then go to DOS and execute:

c:\ipconfig

connection-specific dns suffix .

ip address. .

subnet mask .

default gateway .

Make a note of that IP address

Enter it in the browser of another machine that is not playing

Enter the system login and password with the game, copy it, and paste it on the machine without the game. There is also one of the simplest,Two machines are all on QQ,And then compress the game,Send it to the other on QQ,Because it's a LAN,QQ will automatically use the nearest speed for transmission。

If both are connected to the same router, you can share the folder directly, and enter the private IP address on the other computer.

If you don't know how to get it, go directly to the regular ** next flying pigeon to send files over the LAN It's convenient and fast.

You're such a dish. You just need to build a LAN, click on the online neighbor, click on the homegroup, and then the next step is complete. You don't understand, so to speak.

The fastest way is to get two machines on Q together, (not the same Q). Then just send the game you play to the other party, just as fast.

1. First of all, create a folder filereceive in a disk that meets the space requirements.

2. Right-click the filereceive folder and select "Properties".

3. Under the "Share" tab, click Share, click the down arrow on the left of Add, select the user to share as "everyone", and click Share.

4. When prompted that the sharing is complete, click the "Done" button in the lower right corner.

5. Then in the security options, click on the "" where the arrow points to.

6. In the "FileReceive Permissions" window, click "Add" pointed by the arrow.

8. Finally, check all the permissions of everyone, as shown in the figure below, and then click "Apply", "OK" to transfer and share.

1.Use a network cable to connect the two machines.

2.Select the disk where the file you want to share is located, right-click and select Share---Advanced Share---Advanced Share--- and select Shared Secondary Folder - OK.

3.Check the IP address of the computer where the file is located (the gateway and subnet mask of both machines should be the same, if different, change to the same). IP View:

There is a network connection icon in the lower right corner of the desktop, click the network connection icon --- select Local Connection - Properties IPv4 to view.

4.Start on another computer - all programs --- Windows system - run (or start - all programs - windows accessories - run, in short, find the run) in the run + the IP just checked as shown below, click OK.

5. You can transfer files directly when you connect it.

Introduce the fastest way: connect two computers with network cables to build a LAN1, first turn on the two computers, connect them with network cables, and plug them directly into the ports you usually use to surf the Internet.

2. Find the file you want to transfer on your computer. Then set up sharing.

3. Method: Select the Chinese folder, right-click, click Share, and operate in turn.

5. Enter ipconfig in the pop-up window, press enter, you can see the IP, and write down the IP.

7. I am connected to two computers, and I can see the files that were shared before. Select the file and right-click to copy it to the local computer's disk.

8. You can open the local disk, right-click to copy and paste, and achieve the purpose of file transfer.

1. Open the start menu in the lower left corner and click the Settings button.

2. At this time, continue to select the icon of the first system setting.

3. Click the nearby sharing option on the left and turn on the switch on the right.

4. Right-click on the file you want to transfer and select Share.

5. Next, you need to select the device for transmission.

6. Wait for the file transfer in the lower right corner to complete, and then you can transfer files between the two computers.

You can directly share files between two computers, and the specific operation steps are as follows:

1. Turn on your computer, find and open "Network & Sharing Center", and click "Change Advanced Sharing Location" in a new window.

2. Click "Enable Network Discovery" and "Enable File and Printer Sharing", and click Save Changes.

3. After that, click on Windows Firewall.

4. Turn off the firewall again.

5. Go back to the computer desktop, select the file you want to transfer, right-click, select Share in the pop-up column, and click on the specific user.

6. On the file sharing page, click Add.

7. Select the name of the other computer you want to add, as well as the permissions.

Notes:1. When using the computer, it is necessary to back up the computer files regularly to prevent the loss of files.

2. In the process of using the computer, the computer should be cleaned regularly.

3. In the process of using the computer, the computer must be operated in a standardized manner.

4. In the case of not knowing the problem, be sure to contact professional personnel for processing as soon as possible.

5. When using the computer to transfer files, you must pay attention to the security between the two computers.

6. When using the computer, do not browse or click on some software with viruses.

1. The premise of transferring files from multiple computers to each other is that multiple computers must be connected to the same router. Then start right-clicking on your computer's desktop, network --- properties --- change the advanced sharing settings.

2. Select the public network and click the startup network discovery below, you can see the startup file and printer sharing, click and open.

3. Click Enable Sharing--- Turn off password protection sharing (other options use the default value) and then save, and confirm.

4. After setting, select the folder you want to share, you can right-click the properties to open the security tab, and then select Add everyone.

5. After completion, open the Share tab - you can select Share, and add "guest" to the pop-up dialog box to choose to share this file and OK.

6. Finally, select Advanced Sharing, open it, choose to share this file, and add the same permissions to everyone. Once you're done, double-click on another computer to open the network, and the folder or drive letter you just shared will appear.

The easiest way for two computers to transfer files to each other through a network cable is to connect the two computers to a switch with a network cable, of course, the router can also set up a local area network, and set the files to be transferred to each other by the two computers to be shared, and you can transfer them to each other.

Right-click on My Computer --Properties --Computer Name --Workgroup, and the two computers will be set to the same Workgroup. Then set the files you want to transfer to each other to be shared. Once you've set it up, you can go to your neighbor's workgroup and find another computer and access the shared files in it.

Or you can directly type in the address bar of your browser and add the name of another computer to access it directly.

"A network cable, connect two computers, set it to and in the IP, and set it to under the IP. The one below is set to borrow the upstairs answer first, but the network cable here is not the network cable used for general Internet access, you need to reconnect the crystal head, that is, make a jumper, and then you can share files.