What are the characteristics of the protective cover of the steel plate house?

The sheet steel shield is designed to withstand +900 temperatures caused by impacts and red-hot debris. In order to prevent injuries caused by the mispassage of the upper limbs, the width of the opening: diameter and side length or the size of the minor axis of the oval hole should be less than 47mm, and the safety distance should not be less than 460mm.

Stainless steel guards mounted on each fold have this function. They can be swinging or fixed. The steel plate protective cover of the guide rail of the machine tool is connected with the protected part without contact through the centering flange installed at the two ends of the protected part.

There are no metal parts in the shroud, so there is no need to worry about the loose parts when the shroud is working and causing serious wear and damage to the machine. If the shield is used in a medium temperature environment, this method can be used to protect the advantages of long stroke and small compression of the steel plate protective cover of the machine tool; The shroud has a long stroke and low compression, with a ratio of 1:10 to length

If the user has special requirements for the type of shield, our factory can negotiate with the user to design. The structure and layout of the machine tool guide rail steel plate protective cover should be designed reasonably, so that the human body can not directly enter the dangerous area, in order to prevent the fingertips from passing through by mistake and causing injury, the opening width: diameter and side length or the size of the short axis of the oval hole should be less than, and the safety distance should not be less than 35mm

Yanshan County Tianjun Machine Tool Accessories Factory.

Steel telescopic guide guards are the traditional form of protection for machine tools. In this field, steel telescopic guide rail guards are widely used, which play an effective role in preventing the entry of chips and other sharp objects, and can also effectively reduce the penetration of coolant through certain structural measures and suitable scraper plates. Our steel telescopic guide guards are able to adapt to the ever-increasing requirements of modern machine tools for high technology, correct installation and high operating speeds.

In addition, our telescopic rail guards are effective against dust, hot debris, coolants, emulsifiers, and occasional vibrations caused by tools or instruments. The materials used guarantee good protection against abrasion, chemical reagents, high temperatures.

In addition, the telescopic rail guard can effectively reduce injuries in the workplace and at the same time bring good benefits in terms of machine aesthetics.

Steel plate guard.

Steel telescopic guide guards are the traditional form of protection for machine tools. In this field, steel telescopic rail guards are widely used.

It plays an effective role in preventing the entry of chips and other sharp things, and can effectively reduce the penetration of coolant through certain structural measures and suitable scraper plates. Our steel telescopic rail guards can:

Adapt to the increasing requirements of modern machine tools for high technology, correct installation position, high operating speed, etc.

Suitable for high-speed movement, the protection of the guide rail of the machine tool is stable and free of vibration and noise. (The speed can operate normally under the condition of 80m min).

Each section of the guard plate is opened in parallel at the same time, and retracted in parallel at the same time, so that it can run freely.

It will not make the guard disjointed, there is a crash sound, which is both beautiful and improves the service life of the guard plate.

On the basis of the original sealing strip, a layer of stainless steel cover plate is added to prevent the high-temperature burn strip of iron filings from rubbing into the rail surface and straining the guide rail.

This device not only protects the service life of the guard plate, but more importantly, ensures the precision of the machine tool.

The steel shield can be more stable at high speed, and the number of sections of the steel plate shield is important for its share, weight and running characteristics. Each single section should be as long as possible, reduce the cost, and usually the maximum stretch and minimum tightening share should be between 31 and 51.

Strengths of steel plate protective cover equipment:

It is completely different from the usual shield pull type one by one.

1. Each piece of the shield can be activated at the same time, so the noise is extremely low.

2. The selection of equipment cover can increase the service life.

3. The steel plate protective cover equipment can make the moving speed of the shield rise to 120m min and accept a higher g value.

4. The steel plate protective cover equipment makes the protective cover move simultaneously and parallel (avoiding the defect that the usual shear protective cover still has snakes) without oscillation.

5. It can be more stable at high speed, and the number of sections of the steel plate protective cover is very important to its share, weight and operation characteristics. Each single section should be as long as possible, reduce the cost, usually the maximum stretch and minimum tightening share should be between 31 and 51, can prevent iron filings, anti-coolant, steel plate protective cover has a good seal. Prevent occasional incidents of things.