The tiles in the living room can be managed for a few years, and how to replace them with new ones i

People attach great importance to the decoration of the living room, because the design of the living room can represent the design style of the whole house, and the living room is also the first place to be seen by the guests, so the living room design is a very important issue for everyone who decorates the house, and the floor seam of the living room is also a place that many people are very interested in, because the beauty of the seam can make their tiles more beautiful.

Tile seams can not only increase the beauty of the entire tile and the diversity of the design style of the entire living room on the appearance, but also in terms of practicality, it can also block some fine dust and bacteria from entering the tile, so as to keep the whole tile neat and clean, and reduce the production of certain dust and bacteria.

After the tile is broken, it is more difficult to repair, and it is a waste of money when repairingTherefore, when using tile seams, it is also necessary to be as careful as possible to protect and care. Because it is very difficult and consuming money when making tile seams during decoration, and every time it is broken, the staff is also relatively hard to repair, and the repair process is also very difficult.

There will definitely be a certain amount of wear and tear after using the tile seam for a few years, and if you want to continue to maintain the tidiness of your living room, you need to repair it, and if you want to repair it, you need to re-do this tile, so it is more troublesome, and it is also needed in daily life, and it is more careful to use, and the entire decoration style of your living room is also to be more loved and cherished.

The sewing knife will remove the original sewing and find the master to focus on it, and under normal circumstances, the sewing agent will be removed.

After construction, it can be managed for about five years, and the longer the time, the deeper the surface layer will be, and it will be oxidized, and there will be peeling and soaking in water in about ten years.

It can be used for a few years, this is to depend on the craftsmanship of the decoration master and the quality of the materials selected, if it is missing, you have to find a professional to buy a new one.

If the quality of your material is not very good, it may fall off in two or three years, and if it is ***, it may fall off after five years.

It can be used for five or six years, and if it is missing, you can buy some and come back and repair it. Everyone should also cherish it in ordinary times.

The replacement of the beautiful sewing is to replace it all, and the old one must be removed first and replaced with a new one. Generally, the normal shelf life is about ten years.

A good sewing agent can be kept for a long time without changing color, and can be maintained for about 10 years. It also has to do with the materials you use.

Buy your favorite materials yourself, and then find a professional decorator to help you get it right.

We know that the time from the appearance of the sewing is not very long, so from the actual practice data, we still can't accurately get a data on the service life of the sewing agent.

Under normal circumstances, no one deliberately destroys it for 5 to 8 years, and it will be oxidized in 8 to 10 years, peeling or other conditions in 10 to 12 years. If the tile grout is peeling, it should be repaired.

The role of the beauty joint is to beautify the tile gap, and the other is to ensure the closure of the tile gap. In this way, it can prevent the tile gaps from becoming mildew, yellowing and black in the later stage, and it can also facilitate our cleaning of the tiles in the future. Yellow and black, it is difficult to clean up on the brick surface, especially the brick joints, which can only be treated with cleaning balls and hard objects, and the joints are taken out after several times.

In the bathroom, too, after the ground water washed through several times, the cracks were exposed, not to mention the ugly death, and the water seeped to the bottom floor.

In fact, the initial function is to fill the gaps in the beautification of the tiles, so that the overall effect of the tiles is more beautiful. For traditional caulking, it can only fill the tile gap, but can not beautify the tile gap; When we take a long time to bathe with water, the surrounding areas of the tiles will be black and moldy, which is disgusting to look at. There are other places where tiles are used, and if you don't do beauty seams, it may become moldy over time, and it will also accumulate dust.

There is no such thing as a wall tile with a complete absence of dimensional differences. Even wall tiles produced in the same batch will appear in sizeSmall differences, such as length, straight angle, etc. When the wall tiles are paved, there are no seams and they are easy to appearThe seams are unevenproblems, affecting the aesthetics.

To this day, caulk is still the first choice for many home users. It's so cheap that it costs almost nothing - when you buy tiles, you give them away, and the brick-laying workers do it for free. Places like bedrooms and living rooms have a good environment, and it is enough to use caulk.

This joint is called an expansion joint. With this joint, the chance of the tile being squeezed and hollowed out is reduced. The surface of the grout is not smooth and can easily hide dust and dirt.

Soon it turned black. This filth can never be removed, only accumulated. Getting dirtier.

It can generally be used for about twenty or thirty years. Tiles still have to be sewn, so that the overall look is more beautiful.

To do the seam, otherwise the distance between the tiles is too large, the inside is easy to dirty, into the ash, it is not easy to clean, do the beauty of the seam will be relatively clean, so the beauty of the seam is very necessary.

3. It has been more than a year since all the decorations have been completed, can the floor tiles still be used for beautiful seams?

It can not only beautify the tiles and make our paving effect more perfect, but also has the effect of mildew prevention and waterproofing, and can also play a certain role in protecting the tiles. However, there may be some doubts about friends with less experience in decoration. Although there are many benefits of beautiful seams, is it really good to make beautiful seams for tiles?

Is it necessary to do it at all? The master said that these 3 situations are best not to do, there are too many disadvantages and it is easy to produce arching.

1. Brick problem

Because the sewing agent has a certain degree of cohesiveness, we should consider the later cleaning work before we officially start construction. For matte tiles, such as antique tiles or some matte wooden floors, these materials are not easy to clean up after the surface is rough, which not only does not play a beautifying role, but will reduce the overall decorative effect.

2. Gap problem

Generally, we need to leave a certain gap when we lay tiles. For the tiles that intend to be sewn later, there are certain requirements for the reserved gaps. The normal should not be less than about 2 mm, so that it is conducive to the later construction, and the effect will be better.

However, if the gap is too small, it will not only affect the beauty of the seam but also affect the expansion of the tile after caulking, and there will be arching.

3. The size of the brick body

While smaller bricks will make the space appear larger, if the tile size is too small, it will increase the number of gaps. This will not only increase the cost of beauty sewing, but also increase the difficulty of construction, which is easy to produce undesirable results.

The master said that in addition to the above situations, we should also pay attention to some problems when they are not suitable. Otherwise, the finished effect will not be too ideal, and it will even fall off.

Cleanup

Before formal gluing, we must clean the gaps on the surface of the tile to ensure that there are no impurities and dust on the brick. In this way, the colloid and the tile can be connected more firmly, and it is not easy to fall off.

It has been more than a year after the decoration, the floor tiles can also be made of beautiful seams, but the construction is not so simple, the longer the house lives, the more serious the pollution of the tile gaps will be, keep the gaps dry and clean before construction, otherwise there will be dust on the beautiful seams.

No matter how long the house is decorated, if you want to decorate it, you must clean the inside of the gaps, which can make the beauty of the seam glue better penetrate, so as long as the floor tiles are wiped clean, you can do beautiful seams.

Yes, but before doing it, be sure to brush the gaps with a brush and clean up the residue and soil inside, which will be stronger and more beautiful.

If the tile is broken, there is no problem in replacing the tile, and the remaining beauty grout can be treated with a heated heat gun to deal with the contact with the tile.

After the seam is done, can the tile be replaced if it is broken?

If the tile is broken, there is no problem in replacing the tile, and the remaining beauty grout can be treated with a heated heat gun to deal with the contact with the tile.

Is it okay to use a hair dryer.

Now that it's hot, you can turn on the hot air gear and try it.

If not, is there any better way?

If the tile is broken, it is necessary to decide whether there is a need to repair it according to the degree of tile damage and the location of the tile damage. If the tile damage surface is larger, it will be very conspicuous if it is repaired, and it is recommended that it is more appropriate to replace the new tile. If the tile is broken during the cleaning of the joint, if there is only a little bit of damage, for example, the size of a soybean, in this case, the tile damage can be repaired.

Moreover, the repair method is very simple, you only need to take the color of the beautiful seam similar to the color of the tile, and you can repair the damaged part of the tile. Like the picture below, the damage of the yin corner gap is very easy to deal with, only need to play more points when gluing, and press the seam with a tungsten steel joint plate small head, after the beautiful seam is done, it can not be seen at all.

It's to change the tiles, the tiles are beautiful, and it's not good to get bricks.

The main thing is how to remove the sewing glue.

The utility knife doesn't move either.

With a special sewing agent cleaning agent, it can quickly decompose the sewing agent.

You can also use the strong hot air of a hair dryer to blow on the cured seam to soften it, and then wipe it off little by little with a sponge or rag.

What is the name of the sewing cleaner?

It is a tile joint cleaner.

Whether it is after the renovation of a new house or an old house, the laying of tiles is an indispensable thing. But after the tiles are laid, many people will consider whether to do tile seams. How should I sew it, and I will introduce it to you today:

1. Cleaning joints: If there is sand and dust in the gaps after the tiles are paved, the effect of the beautiful seams will be greatly reduced. It is necessary to clean the crevices of dust and stagnant water.

You only need to use a utility knife or seam cone to clean the impurities in the gaps, then use a brush to clean the impurities and dust, and then use a semi-dry towel to wipe the gaps and both sides clean.

2. Paste masking paper: After the sewing is completed, it is not possible to paint it immediately. Because if the sewing agent accidentally drip onto the rough surface of non-slip bricks and antique bricks, it will be difficult to clean up when it solidifies.

Therefore, before gluing, it is necessary to paste masking paper on the edge of the tile to avoid difficulties in subsequent gluing.

3. Gluing: Whether it is a single tube or a double tube of sewing agent, it will be equipped with a glue gun nozzle, and it is good to squeeze it directly into the seam, in fact, the operation is very convenient. The key is to press the frequency of the glue gun and the speed of the glue gun movement during construction, not too fast when gluing, and even slow to ensure that the glue is smooth and balanced.

4. Caulking: During the caulking process, while the sewing agent can still flow, gently compacted with a caulking ball. Using a caulking ball to trim the seam effect allows the tile to leave a micro-groove in the gap to prevent scratches in daily life.

5. Shovel glue: generally after 24 hours, after the sewing agent is dried, the tiles without masking paper should be scraped off with a shovel blade, if the weather is too cold, it may need to be extended to 48 hours.

It is recommended to find a professional construction team to do it, it is too troublesome to do it yourself.

<> tile seams can generally be maintained for about ten years. It takes 10 to 12 years for peeling and soaking to appear. Under normal circumstances, if it is a professional sewing master, there is no quality problem with the sewing agent itself, and there is no problem with maintaining the sewing for ten years.

The two-component sewing agent can even be kept unchanged for 30 years. If the seams at home cannot be maintained for a long time, it may be due to the quality of the seam products, the wet gaps of the tiles, the gaps are not cleaned, the seams are unevenly mixed, and the temperature is low.

<> tile seam can be maintained for about ten years. Under normal circumstances, the product of ceramic tile sewing agent is shelf-stable for one year, if it is said that the effect is made, it is no problem to keep it for ten years, if it falls off in a few months, it may be that the sewing master is not very professional, in fact, the effect of the real sewing agent can be maintained for 10 years, and the two-component sewing agent of real porcelain glue can be maintained for 30 years There is no problem.

Hello dear, it has been decorated for several years and can still be sewn; It is also possible to do beautiful seams, as long as there are seams in the tiles at home, you can basically do it. However, the old tiles that have been "in service" for many years are definitely not as good as the new tiles, especially the beauty seam construction can not be "simple and crude". For old houses that have been renovated for more than ten years, it is also possible to do beautiful seams, as long as there are seams in the tiles at home, basically you can do it.

However, the old tiles that have been "in service" for many years are definitely not as good as the new tiles, especially the beauty seam construction can not be "simple and crude". The old tiles that have been decorated for several years should pay attention to the following points: 1

Gap cleaning tiles have been used for so many years, and the crevices must be filled with dirt, and cleaning is a big job. If you can't clean it with a utility knife, it is recommended to use a small cutter or sewing machine to open the gap to a suitable size. It is more difficult to make beautiful joints of old branch oak tiles than new tiles, but only when the gaps are cleaned can the construction effect of beautiful seams be guaranteed.

2.Whether the gap is damp tile has been used for many years, the high gap and base of the sedan, we all know that in the case of wetness, it is not possible to do the construction of the seam, so if you want to ensure a good seam effect, you must wait for the tile gap to dry before you can construct the closed ruler. 3.

Whether the tile hollowing is serious any product may be damaged after many years of use, the tile is very certain after more than ten years of use hollowing and cracking, this is because the cement of the tile base shrinks over time. If there are only one or two tiles at home, it is okay, if there is a lot of hollow drum area, then you should consider re-paving the tiles, and then do the beauty of the seam construction.