It takes a few days for the car film to dry, and how long does it take for the car film to dry

1. After the car film, avoid lifting the windows within three days, so as to avoid the displacement of the car film that has not been fully bonded.

2. After the car film is applied in winter, it is recommended that you do not raise or lower the windows or wash the car within a week. It takes about a month for the front and rear gears to dry. During the day, the front windshield should be exposed to the sun.

The most noteworthy thing is that the backgauge plus ** can not be opened within a month, because if the film is opened after the winter film, it will produce bubbles near the plus**, which cannot be repaired, and will cause unnecessary losses and troubles.

3. When cleaning car glass, the film window should not be cleaned with chemical solvents, so as not to corrode and damage the surface of the car film.

The life of the car film, in addition to maintenance, mainly depends on the quality, and the two years of 4S are basically blistered. Like Meiji's has an 8-year warranty, the film is a one-time consumption for the car, and it does not need to be replaced so quickly if it is pasted right, and it will be replaced if it is not good for two years at most, so it is not good for glass and electric heating wires, and it is also necessary to pay to the merchant in addition to the glue fee, which costs more money inside and out, so it is a one-time paste to a good film, which saves worry, trouble and money.

Do not raise or lower the windows for three days, and do not open the rear windshield heater for seven days. If there is sunlight, it will dry in three days.

Do not lift or lower the window glass for three days, and try to avoid too much temperature difference.

Just don't raise or lower the windows for three days.

Car wrap dries for 3 days.

The function of car film is mainly to block ultraviolet rays, block part of the heat and prevent injuries and anti-glare caused by glass splashing, and at the same time, according to the one-way perspective performance of the solar film, to achieve the purpose of protecting personal privacy. In addition, it can also reduce the damage caused by ultraviolet radiation of items and personnel in the car, reduce the temperature in the car through physical reflection, and reduce the use of car air conditioning, thereby reducing fuel consumption and saving some expenses.

7 days.

It takes about 7 days for the car to dry after the film is applied, and the windows should not be raised or lowered arbitrarily during this period. The reason is that the glass is usually relatively tight in the car that has just been pasted with the car film, and the edge of the car film is easy to grind and roll up during the process of opening and closing the window, causing damage to the car film. If you inadvertently open the window, it is not a big problem, just be careful not to open the window, and after the car front windshield film, do not let the air conditioner blow directly to the front windshield within 7 days, after the car rear windshield film, do not open the rear windshield defogging line within a week.

Precautions for car films.

When applying the film, you should choose a solar film with good light transmittance, even if the color is darker, the scenery you can see should be transparent, not dim or deformed. Especially at night, if the light transmission is not strong, the driver's vision at night is not good.

Choose a high thermal insulation rate: a good solar film should have a good thermal insulation effect, which can prevent ultraviolet ingestion, even if the sun is more toxic, it can also play a role in heat insulation, and it is best to take a piece of film to look at it in the sun.

This varies from 2-3 days in summer to 6-7 days in winter.

Another reminder, try not to post it when the weather is too hot or too cold, and don't stick it when the temperature difference is too large.

Principle: The film needs to be water, and the water needs to be mixed with lubricant, and the lubricant will produce foam. There will be residues directly on the film and glass.

1. Too hot: The water evaporates too quickly, the water has come out but the foam can't come out.

2. Too cold: The water is frozen, and of course the foam will be frozen. But water can still volatilize when frozen, but foam can't.

Therefore, there will be snowflakes in the membrane.

Of course, the above situation is rare, and most of them will volatilize slowly, depending on the quality of the lubricant mixed with the water of the film.

Then when the temperature difference is too large: the film needs to be baked, and the film needs to be heated by the glass, if it is very hot in summer, the film is pasted during the day, and it rains heavily at night, the glass is always hot and expands and contracts coldly, which may cause the glass to break.

Of course, these situations rarely happen, but unnecessary troubles should be avoided as much as possible.

In order to avoid damage to the heat insulation film, it is best not to lift the window glass within 5-7 days.

Because it takes a certain amount of time for the heat insulation film to be firmly attached to the window, if the window glass is opened and closed, the newly attached film edge will curl, and the film that has not yet been fully bonded will be prone to displacement.

After the window glass is pasted with heat insulation film, in addition to strictly prohibiting the opening of the window, there are several points that need to be noted:

Do not wash the car within days.

2. Do not wipe the film surface with a cloth containing chemical solvents.

3. Do not adsorb heavy objects on the surface of the heat insulation film film, or paste high-strength adhesives 4. Avoid hard objects damaging the film surface.

In addition, some time after applying the film, you will notice that there is a foggy water vapor inside. This is a normal phenomenon in the process of drying the solar film, and it will slowly disappear after a while.

The film I pasted said at the time not to see water for 3 days, and not to open and close the glass.

It is best to apply the film on cloudy days, two or three days.

In order to avoid damage to the heat insulation film, it is best not to lift the window glass in 5-7 days.

Because it takes a certain amount of time for the heat insulation film to be firmly attached to the window, if the leather shirt is opened and closed during this period, the newly attached film edge will curl, and the film that has not been fully bonded is easy to displace.

3 days.

Generally, whether the window can be lifted after the film is applied needs to be determined according to the time and weather, basically within 3 days in summer, and about 7 days in winter, try not to raise or lower the window. The reason is that the car film has just been applied.

It is not completely fixed, and it is easy to displace during the window lifting process, and even grind or scratch the edge position.

Precautions for new car films.

When choosing a film, you must be careful, and you must also choose a film produced by a regular manufacturer, so that you can have a guarantee. Many veteran drivers know how to apply film to their cars.

Not only to protect the car, but also to protect against dust and scratches, and more importantly, to protect against ultraviolet rays.

role. Although the film is just a trivial matter, everyone can't ignore this problem.

When choosing a car film, be sure to choose the best one. And it's best to find a knowledgeable friend to help you choose. If you choose a film by yourself, you can also distinguish the quality of the film according to these tips.

When choosing a car film, you must observe the light transmittance of the car film.

After the car width is pasted with the film, it is necessary to avoid lifting the window within three days, and it will dry after three days. Do not open the sunroof when a vehicle with a sunroof for three days is driving, especially at high speeds.

After applying the film in winter, it is recommended that you do not raise or lower the windows and do not wash the car for a week. It takes about a month for the front and rear gears to dry.

When the edge of the film is blistered, it should be repaired at the construction point within 24 hours, and the treatment will be exceeded because the glue around the bubble has dried out, and the membrane can no longer move, and the crease will definitely occur during treatment. It is forbidden to apply strong adhesive labels directly to the film within one month after the film is applied, so as not to cause the partial detachment of the film from the glass.

Car wraps. It is also necessary to understand the vehicle inspection policies of each city. For example, in some cities, the front windshield and the glass outside the windshield are used for visible light in the driver's field of view.

If the perspective ratio does not reach 70%, the annual inspection will not be passed. When the car film is pasted, the front window leaves a triangular area that cannot be filmed, otherwise it will affect the normal annual inspection of the vehicle.

Job. <>

Hello dear, under normal circumstances, the new car film can be used normally for about 3 to 7 days. First, this choice depends on the ambient temperature of the outside world, and if it is summer, it can be used normally in about three days. Second, if it is winter and the outside environment temperature is relatively low, it is recommended to use it normally for about 5 to 7 days.

Third, if it is used in advance, it is easy to cause the film to appear on the edge of the relevant letter cover. Hello, I wish you a happy family, if necessary, you can continue to consult, I will always wait for your reply I wish you good luck, everything goes well, and a happy life! Kiss kiss kiss.