Urgent help, accidentally deleted partition recovery, misused partition tool deleted partition how t

Personally, I recommend a software diskgenius, and then click on the search partition of the menu above, select the unallocated area, and then click OK, he will search for your EF disk, prepare a large mobile hard disk, copy everything from the EF disk, of course, if your CD disk is large enough, you can also copy it to the EF disk. Hey, okay.

If the partition is lost due to simply deleting the partition. If your partition structure is special, simply using partition recovery software, to a large extent, may not be able to find the correct partition data, wrong reconstruction, will destroy the original partition information, causing recovery difficulties.

Be sure not to repartition, format, or anything like that. In that case, the recovered data is incomplete. Maintain the status quo. To a large extent, the original data can be completely restored with proper analysis and processing. Without the need for data recovery software to scan the recovery.

If you simply use data recovery software to scan and recover, it will take time and the effect is difficult to say.

I've recovered a lot of your situation, and many times it's 100% complete recovery of the original partition. The key to this problem of these partitioned data is to protect the state of the hard drive in question. Don't partition it randomly.

Don't write new data after partition loss, and generally recover data perfectly.

In order to avoid the wrong operation destroying the data again, you can first read the article in my space. If you still need assistance, feel free to hi me or q me.

Sprinkle with software recovery, it's very simple. 、

Summary. If you want to split a new partition without destroying existing data, you can take the following steps:1

Open the physical hard drive where the lost partition is located in the DiskGenius software interface and right-click to select it"Rescan the partition"。3.The software will automatically detect your partition and select it, then click on it above"Partitioning"button to go to the Partition Table Adjustment page.

4.On the Partition Table Reconciliation page, create a new partition on the unallocated space. 5.

After adjusting the size of the space and the type of partition, click OK to successfully split the new partition, and then you can save the data in the new partition.

Can you describe the challenge you encountered? The more detailed the better, so that I can better help you answer.

I was just about to make a system, and I read the wrong drive letter.

The useful hard drive is divided into a partition, and all the data is in it.

Can it still be recovered.

Are you a windowns system? What partitioning tool is used? In addition, after deleting the partition by mistake, is there any submission?

That's it now.

It is windoows

I didn't see it very clearly, it probably looked like it was dg, then, I knew it. Excuse me, after you deleted the partition, did you save or commit?

If you don't save or commit, the DG changes are just in memory, you exit the program, reopen it, and it should be restored.

You try, exit the dg, and then reopen it, without saving the action. See if you can fix it?

Dear, is there a solution?

If you want to split out a new partition without destroying the existing data, you can take the following steps:1Open the physical hard drive where the lost partition is located in the DiskGenius software interface and right-click to select it"Rescan the partition"。

3.The software will automatically detect your partition and select it, then click on it above"Partitioning"button to go to the Partition Table Adjustment page. 4.

On the Wheel Branch Partition Table Reconciliation page, create a new partition on the unallocated space. 5.After adjusting the size of the space and the type of partition, click OK to successfully split the new partition, and then you can save the data in the new partition.

See if you can tear out the new partition in this way and then install the system in the new partition or wherever you wish.

Hello, kiss <>

When misusing the partition tool to delete a partition, in order to recover the partition, you can try the following methods:1Stop using the disk for any write operations to prevent new data from being written, otherwise the data on the deleted partition may be overwritten, making it impossible to recover.

2.**And install professional data recovery software, such as Recuva, Easeus Data Recovery, GetDataback, etc. These software can scan the storage space of the deleted partition and recover deleted files and folders.

3.Run the data recovery software and check the "Full Scan" option. This will scan the entire hard drive, including the deleted partitions.

4.Once the scan is complete, review the results of the scan and try to recover the files and folders you need. Please note that the recovered files may be incomplete, or they may not be recoverable.

It's best to choose to recover smaller files and folders, as larger files may take longer to recover. 5.If the data recovery software can't find the data you need, or if the data recovery is incomplete, you may need to seek help from a professional technician.

In this case, you can have a professional using a more professional device or software to try to recover the deleted partition. In conclusion, when you mistakenly delete a partition with the partition tool, you should immediately stop using the disk and take steps to recover the data as soon as possible so that the data is not overwritten, resulting in unrecoverable. <>

The problem is that the hard disk partition table is corrupted, so the partition table needs to be rebuilt.

If you use a ghost CD, there will be a DOS toolset in it to find a diskgen software, which is a good operation of the Chinese interface.

There are several points to note about diskgen operation: 1. Use interactive scanning; 2. Don't blindly keep the point, unless your hard disk has only been divided once since it was born; 3. If the hard disk has been divided more than 2 times, insist on scanning the whole disk to make sure that you know it, and then keep the partition table closest to the partition structure of the previous partition for recovery.

System reinstallation refers to the reinstallation of the computer's operating system. When the user operates incorrectly or is damaged by viruses and Trojan horses, the important files in the system will be damaged, resulting in errors, or even crashes and cannot be started, so they have to be reinstalled; Some people who like to operate a computer reinstall it in order to optimize the system and make the system work in the optimal state under the normal operation of the system. There are generally two types of resystems: overlay reinstallation and new reinstallation.

Since we are considering a reinstallation system, there is naturally no upgrade installation involved. Generally speaking, there are two situations in which a system can be reinstalled:

1. Passive reinstallation: Due to various reasons, such as user misoperation or damage by viruses and Trojan programs, important files in the system are damaged, resulting in errors or even crashes that cannot be started, and the system has to be reinstalled. Sometimes, although the system is working normally, there is an error from time to time, and it is better to reinstall it than to spend time and effort trying to find it.

Will reloading lose partitions? Rare. The upstairs said Disk Genius can really help, but not by searching for partitions, but by the properties of partitions. Every time the formatting is prompted, the file format flag in the partition attribute is corrupted, and it is generally okay to force the flag to be written.

It's so easy. Just in Disk Management. It's good to create a partition from a spare partition.

If you want to recover the important data inside, you have to use software. It is recommended for you"Universal toolbox"

Restore the digital backup under PE with Disk Doctor. Even if the hard drive is broken, the numbers can be recovered.

It's very easy to use, you can try it.

If it is difficult to recover all without loss, try recovery software for it, there are many of them online.

1. Check your disk partition and which one is missing compared to the original, because there may be only one or two partitions left after the system is reinstalled.

3. Double-click to open the shortcut generated after successful installation, at this time it is time to run the software and start the recovery process, we need to select the recovery option related to the disk partition.

5. Spend a while waiting for the disk partition to recover.

Hard drive partition is deleted by mistake, a quick way to recover data. mp4

Rebuild the partition but do not format it (note: do not write to the disk at this time, such as copying or transferring files), and install the hard disk deleted recovery software on another hard disk partition, which may be able to recover some things. If the data is very important, send the hard drive to a computer company ......The general charge is 200

Partition recovery is as simple as it would if you deleted a partition: Control Panel, Computer Management, Disk Management.

However, I feel that LZ's computer knowledge is not very rich, or send it to a computer company to recover data, find a larger company, the recovery technology is actually similar, the key is to be reasonable.