Urgent help, about netbook reloading

What are the specific problems? If you want to reinstall the system by yourself, you can choose the easy-boot USB flash drive startup maker to reinstall the system. The installation steps are as follows:

1. First of all, make the U disk into an easy-start U disk to start, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the U disk to start to enter the easy-start main menu, select the "Enter Win8PE environment installation system" option, and press the Enter key to confirm.

2. Enter the win8pe system, the installation tool will pop up by itself, click "browse" to select and save it to the system image file in the U disk.

3. Wait for the easy-start PE installation tool to automatically load the system image package installation file, just select the installation disk location, and then click the "OK" button. At this time, click the "OK" button directly in the pop-up prompt window. Then the installation tool starts working, please wait a few minutes.

4. After completion, a prompt will pop up to restart the computer, click the "Yes (Y)" button.

5. At this time, you can unplug the U disk, restart the system to start the installation, we don't need to operate, wait for the installation to be completed, and finally restart it once before entering the system desktop.

You can boot the computer with the 360 rescue disk and then reinstall the system.

What does the blue screen prompt? Let's take a picture.

The reinstallation failed and is not compatible with your computer. Change the system handle.

First of all, there is no problem of insufficient memory in the C drive, it should be not enough space, you can choose to install it on the D drive or the E or F drive.

If it is not enough, you need to repartition (that is, divide a hard disk into a CD E disk with a certain capacity), repartition is in the previous interface of the installation and formatting interface, you need to delete the existing partition, and then redivide, the space divided for C disk is larger than the original (preferably more than 15G), and the remaining space is divided into D disk and E disk. After formatting the C drive, it can be installed.

1、Check what the capacity of the C disk is,The current GHOST system (except for the lite version) must be installed at least 2G,Less than this capacity can naturally not be installed。

2. If there is no problem in this regard, it may be that the hard disk has hidden partitions, you just need to use partitioning software to delete all partitions, then repartition them, and install them after formatting.

If you have a problem formatting the hard drive, delete all the hard drives, and then reinstall the system in separate disks.

Repartition the hard drive and the problem will be solved.

Don't know what version of your system is.

However, don't use the version of Tomato Garden, be sure to use the original, Tomato Garden is a piece of garbage, and anyone with a little common sense will not use it.

This problem should not be caused by a virus.

Check to see if you have installed drivers for your motherboard and graphics card since your system was reinstalled.

The signal is out of range and it may be that your monitor can't support too high a refresh rate, and it may also be related to the driver not being installed.

The system is too unstable, change the system disk.

Reload aside! ~

Recommended|XP Tomato Garden.

Find out!

There should also be Trojan viruses and the like on other disks. It's okay to just do a good job of the system.,As time comes in again, the Trojan starts to move again.,Cause you a lot of inconvenience.,You'd better check if there are Trojans in other disks first.,It's recommended that it's best to be Rising.,Kaba and Norton are also okay.。

You can test the hard drive to see if there are any bad sectors.

You're using a ghost installation disk to install the system.

Suggestion: 1》If the hard disk has no important data, repartition the hard disk and then install it (99% can be installed after partitioning, if there is important data, you can also repair the partition to try).

2》Replace another relatively new ghost disk。

3》Install the system with a mounting disk.

1. You need to press the F1 key to enter when you boot up, mainly because the settings in the BIOS do not match the hardware data of the real guess hall and cause volcanic preparation, which can be divided into the following situations:

1. In fact, there is no floppy drive or the floppy drive is broken, but there is a floppy drive in the BIOS, which leads to pressing F1 to continue.

2. I originally hung two hard disks, and set them as dual hard disks in the BIOS, but later forgot to change the BIOS settings back when I removed one of them, which will also cause this problem.

3. If the motherboard battery is out of power, it will also cause data loss, which will cause this failure.

4. Reboot the system, enter the BIOS settings, and find that the floppy drive is set to, but in fact there is no floppy drive in the chassis, set this item to none, troubleshooting.

Second, whether your U disk is made into a boot U disk, only after the boot U disk is made and the computer is set to a U disk to start the computer, if your U disk is not a boot U disk, please follow the following method to make the U disk into a boot disk, you can use the U disk to start the computer. **Suipai has a U disk to start the installer, and make the U disk as a boot U disk; It is recommended to install the program "Xingyu pear cloud USB disk system 2011", this program can be found on the Internet by searching for "Xingyu pear cloud USB disk system 2011". It's simple to make :

Insert the U disk into the computer first, run the Xingyuli cloud U disk system 2011 program, there will be an operation interface to make the U disk boot disk, and you can make it in two minutes according to the prompts.