Can I buy rainbow waterproof coating and come back to build it myself?

Different types of waterproof coating construction methods are different, depending on what kind of paint you buy. There are many types of barrel waterproofing, some are finished waterproof, open the lid and can be painted with a little stirring, and there is also the proportion of powder in the barrel, the liquid material is fully stirred with a mixer, and it can be painted after 3 minutes of static stirring.

It can be, but it is better to have a professional construction or a professional master to do it. Although there are product descriptions and construction processes, but it is inevitable that you are not proficient in doing it yourself, and some details are easy to miss. For the decoration of the whole house, waterproofing does not cost much, so there is no need to worry about it.

Waterproof construction still requires professional knowledge and skills, and I personally feel that there is no need to save money on construction. Yuhong waterproof is indeed the best waterproof business of the bird's nest. The 300 self-repair is one of the best-selling models in his family, and the quality and performance are excellent.

If you construct by yourself, you should pay attention to the following points: 1. The temperature during construction should be between 5 and 35, and outdoor construction is prohibited in windy or rainy and snowy weather; 2. The prepared paint should be used within 1 hour, and it is strictly forbidden to add water again during the painting process; It is strictly forbidden to add water or any other materials during the batching process; 3. The liquid or powder that has not been used up after opening should be sealed and stored; 4. Pay attention to protect the waterproof coating film from damage during the construction process; 5. When paving tiles on the waterproof layer, it is recommended to use rainbow tile adhesive; 6. The product contains alkaline substances such as cement, which may cause allergies, and protective measures should be taken when using. If it comes into contact with eyes, rinse immediately with water and seek medical attention immediately if there is any discomfort.

OK.

The high-elastic thick acrylic waterproof coating is made of acrylic emulsion produced by BASF, Dow and other famous foreign chemical enterprises, so it is very strong in water discharge, basically does not contain harmful substances such as VOC and formaldehyde, and the coating has an elongation of more than 350%, which can resist the deformation of the strong base layer, which is far stronger than similar products on the market.

Precautions for the construction of waterproof coatings.

Before use, the base should be treated, the base is required to be dry, clean, flat, compact, no sanding, blistering, hollow drumming, reverse slope and local potholes, the compressive strength of the base is not lower, the moisture is less than 8%, and the yin corner should be powdered and treated.

The quality of Yuhong waterproof coating is very good, it is a relatively large waterproof coating enterprise in China, a listed company, and a well-known trademark in China.

The waterproof coating is painted on the surface of the building, and after the coating is cured, the waterproof film formed has certain physical characteristics such as extensibility and plasticity. The product has an elongation rate of more than 350%, which can strongly resist the deformation of the base layer, and is a product with strong resistance to the deformation of the base layer in the water-based waterproof material, which is suitable for indoor waterproofing of new buildings.

Precautions and key points for waterproof coatings:

Good environmental performance, water is a dispersed medium, no solvent pollution, non-toxic, non-combustible, it is a green environmental protection product (through the ten ring environmental protection certification). Yuhong high-elasticity thick acrylic waterproof coating is prepared by acrylic emulsion produced by BASF, Dow and other famous foreign chemical enterprises, the product has good water resistance, basically does not contain harmful substances such as VOC and formaldehyde, excellent environmental performance, and has obtained the German EC1+ environmental protection certification.

Easy to paint, with the same roller coating speed and tools, the base surface of Yuhong 400 waterproof coating is obviously smoother and smoother than that of other products at the same price. Yuhong dries faster than other products at the same price.

Artificial ** is different in each place, but doing waterproofing is a very small part of the cost of home decoration, and it will not be very expensive. When my home was renovated in the middle of last year, it was Yuhong waterproof to do waterproofing, contracting labor and materials, and the quality of waterproof coating was very good.

Answer: The paint contains formaldehyde, and Yuhong is the same, but the content is lower than that of other brands, and the paint contains formaldehyde, and Yuhong is the same, but the content is lower than that of other brands J90 high-efficiency reinforcing agent (special for glue): It is a new type of high-permeability wall reinforcement material composed of polymer emulsion and multi-functional environmental protection additives. It has the characteristics of good reinforcement, strong permeability, convenient construction and wide adaptability, and is suitable for reinforcing the wall before scraping putty.

Wall Beili J100 strong wall reinforcing agent: It has the characteristics of good sealing, strong permeability and high brushing strength, and is suitable for the interface treatment of concrete, mortar layer and various partition material base layers.

Artificial **different places**, different waterproofing companies** are also different. Years ago, I used the upgraded blue gold G101 color ultra-soft waterproof paint in my home, which I thought was very good. Yuhong waterproof is a waterproof national brand, the quality must be excellent, the construction master also said that their waterproof coating quality is good, many people use.

Toxic, polymer cementitious waterproofing coatings are not toxic.

There are two main categories of waterproofing materials on the market:

1. Polyurethane waterproof coating, this kind of material is made of polyurethane and coal tar as raw materials. The tar gas it volatilizes is highly toxic and difficult to remove, and its use was banned in China in 2000.

2. Polymer cement-based waterproof coating is composed of a variety of water-based polymer synthetic emulsions and high-quality cement mixed with various additives, and the flexibility of polymer (resin) is integrated with the rigidity of cement, which makes it excellent in impermeability and stability. The advantages are convenient construction, low comprehensive cost, short construction period, and non-toxic and environmentally friendly.

In the process of decoration is a more important link, the waterproof materials currently sold on the market are mainly coated film waterproofing, divided into flexible and rigid waterproofing, flexible waterproofing mainly includes two-component polymer waterproof coatings, polyurethane waterproof coatings, acrylic waterproof coatings. Rigid waterproofing mainly includes polymer cement waterproofing mortar and two-component waterproofing mortar, that is, the ratio of emulsion to mortar is 1:4.

Requirements for home decoration waterproof materials: environmental protection is the first requirement for the selection of home decoration materials today. Modern home decoration waterproof materials have: waterproof, mildew-proof, anti-corrosion and other uses. Since most waterproofing is entrusted to a decoration company, it must be simple and convenient to construct.

Under normal circumstances, the rainbow waterproof material can be added with water.

The proportion of water added to the waterproof of Yuhong, in principle, does not exceed 30% of the proportion of water, and the proportion of water is too large to cause depowdering and reducing the coverage force. The master usually adds 30 to 50 water dilution to a paint, 5 to 30 water is added to the colored paint, the darker the paint is added less water, and the colored paint is recommended to use a roller for construction.

When painting on a rainy day with high humidity, brush only once a day and try not to paint wood on a rainy day. Yuhong waterproof coating has the characteristics of waterproof and breathable, ultra-soft crack resistance, and clear smell and environmental protection. Yuhong Waterproofing This waterproof coating can resist micro-cracks and micro-displacement of the base layer, and the high-end breathable and impermeable technology helps the water vapor in the wall to spread to the indoor environment and prevent the wall from becoming moldy.

Hello, the use of waterproof materials requires adding water. The amount of water added must be allocated according to the proportion, not too much.

How to use rainbow waterproof coating? Do you need to mix water before construction?

How to make Yuhong waterproof coating clear? Do you need to mix water before construction? Hello, happy to answer your <>

The use of Qinyuhong waterproof coating is as follows: 1. Pour a suitable dose of solution into the container first, and then add powder and stir to make it a uniform slurry; 2. Treat the base layer clean to ensure that there is no dust and impurities; 3. Apply the paint evenly on the base layer, and take protective measures 4. After the waterproof layer is dry, it is necessary to carry out a two-day closed water test. 1. Under normal circumstances, water cannot be added, because the ratio of waterproof coating is designed and cracked by the merchant, and if water is added to it, it will affect its waterproof effect. The formula of each paint is strictly tested and confirmed to be correct before it is put on sale, so when using it, be sure to follow the instructions for its use.

2. When buying waterproof coatings, first of all, pay attention to the manufacturer of the product to see if it is a qualified product. Because there are many kinds of waterproof coatings on the market now, there will be certain differences in quality, so it is best to choose a qualified manufacturer to ensure its waterproof effect. Hope mine can help you <>

Do you have any other questions?

Hello dear! We'll be happy to answer for you. How to deal with Yuhong waterproofingA:

How to remove the rain rainbow core rotten waterproof clothes: 1. You can use acetone or banana water to drop on the waterproof stains, and you should use a brush to scrub them repeatedly, and then rinse them with water after the glue stains become soft and take off the fabric. If it doesn't work once, you can brush it several times repeatedly and finally wash it.

Do not use this method for fabrics containing acetate to avoid damaging the fabric of the garment. 2. You can use a mixture of 60 Li liquor or 8:2 alcohol (95%) and water to soak the waterproof glue stains on the clothes, and after soaking for about half an hour, you can scrub with water until it is washed, and finally rinse with water.

3. You can first use raw egg white to remove the waterproof glue on the surface of the clothes, then wipe off the loose residual particles one by one, and finally wash them in soap, and finally rinse them with water. If it is a fabric that cannot be washed, it can be applied with carbon tetrachloride to remove any residual dirt. 4. If the clothes are stained with waterproof and other stains, you can soak the polluted part of the clothes in warm water, when the stains are dissolved in water, then rub them by hand until the stains are all rubbed off, and then wash them with warm washing liquid, and finally rinse them with water.

Dear, I'm glad to answer for you. Do you want to add water to Oriental Yuhong waterproof coating Answer: In principle, water can not be added, but if the base layer is too dry or the water absorption rate is large, a small amount can be added, not more than a bottle of mineral water.

However, it must be clear that the addition of water changes the solids content of the emulsion, which also changes the flexibility. Whether it is the appearance performance after painting and the actual effect of Wu Shuqing after painting, the proportion of ingredients in the manufacturer's paint is strictly tested and tested before it can be put into the market. The effect of using water is greatly reduced, because the addition of water changes the liquid-powder ratio of the coating (the ratio of emulsion to powder), the optimal configuration is destroyed, and the actual performance of the cavity grip coating cannot be guaranteed.

Summary. Hello dear! How to use rainbow waterproof coating:

Pour the rainbow waterproof paint into the container, slowly add the rainbow powder when stirring, and stir for 3-5 minutes to form a uniform slurry, but it should be noted that there are no particles in the glue. Then clean up the places that need to be waterproof, use a brush or roller brush to brush the rainbow waterproof on the ground, and you must use even force to ensure that the brush in each place can not miss the brush.

How to use rainbow waterproof coating?

Hello dear! How to use rainbow waterproof coating: pour rainbow waterproof coating into the container, slowly add rainbow powder when stirring, stir for 3-5 minutes to form a uniform slurry, but it should be noted that make sure that there are no particles in the glue.

Then clean up the places that need to be waterproof, use a brush or roller brush to brush the rainbow waterproof on the ground, and you must use even force to ensure that the brush in each place can not miss the brush.

Yuhong waterproof coating use: 1. Pour a suitable dose of solution into the container first, and then add powder and stir to make it a uniform slurry; 2. Treat the base layer clean to ensure that there is no dust and impurities; 3. Apply the paint evenly on the base layer, and take protective measures 4. After the waterproof layer is dry, it is necessary to carry out a two-day closed water test.

When carrying out the construction of waterproof engineering, we must be careful to ensure that the details are in place and that there is no omission in the application, so as to ensure that the follow-up can operate normally.

1. Before waterproof construction, the base layer needs to be treated to ensure that there is no dust and impurities on the outer layer, otherwise it will affect the future use. 2. When doing waterproofing, it is necessary to deal with the details of the connection between the sewer and the ground, and if it is not handled well, there will be water leakage, once the water leakage will affect the future use, and it must be repaired again, which will cause unnecessary costs.

3. When painting the paint, it is necessary to ensure that each place will not be missed, especially the joints between the wall and the ground, because the corner can be used to wipe the joints during waterproof construction, and the height of the wall waterproof should be more than one meter.

Hello dear! The above is the use of rainbow waterproof coating, in order to ensure that it can be used normally in the future, we must pay special attention to waterproof construction, each waterproof coating must be coated balanced, to ensure that there is no omission, otherwise it will have to be reworked in the future, which will cost more money, the gains outweigh the losses, I hope to help everyone.

Summary. Not much, low. The formaldehyde content of Oriental Yuhong waterproof is low.

Founded in March 1998, Dongfang Yuhong has developed into a leading enterprise in China's waterproof industry integrating R&D, manufacturing, sales and construction services of waterproof materials, and is a national high-tech enterprise, listed company (SZ002271), with a nationally recognized enterprise technology center and postdoctoral research station.

Not rocky annihilation more, low. The formaldehyde content of Oriental Yuhong waterproof is low. Founded in March 1998, Oriental Rain Socks has developed into a leading enterprise in China's waterproof industry integrating R&D, manufacturing, sales and construction services of waterproof materials, and is a national high-tech enterprise, listed company (SZ002271), with a nationally recognized enterprise technology center and postdoctoral research station.

Yuhong waterproof coating formaldehyde is not much and low. The formaldehyde content of Oriental Yuhong waterproof is lower than that of the stall hole. Founded in March 1998, Oriental Yuhong has developed into a leading enterprise in China's waterproof industry integrating R&D, manufacturing, sales and service of anti-water materials, and is a national high-tech enterprise, listed company (SZ002271), with a nationally recognized enterprise technology center and a postdoctoral research station.