Piano Basic Fingering, Piano Basic Fingering

Updated on amusement 2024-02-09
9 answers
  1. Anonymous users2024-02-06

    599-849-299-740 can be interspersed with steel base 1234 or Thompson.

    The piano is really difficult to learn without a tutor.

  2. Anonymous users2024-02-05

    Czerny 599 849 299 740

    Hanon is a good book for practicing fingering.

    You can go and buy a book on the piano basics to learn.

    I wish you a speedy success!

  3. Anonymous users2024-02-04

    Czerny 599,,First,To 100 pieces,Practice guide,Welcome to learn piano if you have any questions, ask questions in the piano forum.

  4. Anonymous users2024-02-03

    Playing the chain infiltrates the piano by hand"1","2","Stool 3","4","5"to mark the fingering. The finger order of the left and right hands is in the same way"1"for the thumb,"2"for the index finger,"3"for the middle finger,"4"for the ring finger.

    5"for the little finger.

    Piano fingering. When playing as a beginner, there are also some postures that you need to pay attention to. The fingers are naturally curved, the hand is semicircular, and the metacarpal joints of the hand.

    and knuckles should be propped up, not collapsed or stiffened. The forearms and hands are placed on the keys at the same level, with the metacarpal joints slightly higher than the wrists. The basic position of the finger touch key should be taken at the white and black keys.

    Distance from 1 to 3 places. When playing the black key, the finger contact point is at the front of the black key. Each finger strumming consists of 3 movements:

    Ready, touch, off-key. When playing each note, the player should take care to keep the hand in the shape of the bow, the shoulder shout that the sail is relaxed, the upper arm is naturally drooping, the forearm is naturally flat, the elbow is slightly above the keyboard, and the wrist is smooth and elastic.

    Piano position.

  5. Anonymous users2024-02-02

    There are five basic fingering techniques for piano: forward fingering, extended fingering, contraction fingering, cross-fingering, and piercing fingering.

    1. Fingering: It is the most basic fingering rule in piano performance, also known as in-situ fingering. The fingers are arranged naturally, the keys with no intervals in the middle, neither expanding nor shrinking, and the five fingers are distributed on the corresponding keys, corresponding to the five notes of do, re, mi, fa, and so.

    The basic course of the Baie Piano 1-62, and the 1-18 of Czerny's 599, are basically straight fingering.

    2. Finger expansion method: It is to expand the five fingers and play six or more syllables, (otherwise only do, re, mi, fa, so), and the tiger mouth between the big finger and the index finger is a favorable condition for extending the hand Interval between the fingers is one or two keys.

    By analogy, two adjacent fingers can be played with a muffled fingering, usually avoiding fingers and finger expansion that spans more than three notes; Both black and white keys can be expanded, of course, to ensure that the playability is easy to play.

    The melody of the octave is played in an octave hand shape, with the distance between the first and fifth fingers being an octave, and the distance between the first and second fingers being a fourth.

    3. Finger contraction: Just the opposite of finger expansion, the hand type is contracted horizontally, and the sum of the two fingers to touch the key and the hand index between them is greater than the number of intervals of the two keyboards to be touched, which is also applied to the fingering when playing syllables less than fifths, but it should be remembered that two adjacent fingers cannot be contracted.

    It is more common to laugh at the lead is that 1 finger and 3 fingers or 1 finger and 4 fingers play two adjacent keys, finger contraction in various forms, no matter what form of finger contraction is for the coherence of melody playing, it is played by relying on the relaxation and close movement of the palm, not to do off-key, or jump over to play.

    4. Cross-fingering: It is "across the thumb", which is the opposite of fingering. It is a fingering technique in which the finger is played by moving the finger over the big finger, such as playing the lower note when the right hand is continuously moved to the left and the lower note is played.

    At the same time, there is also a taboo that you can't use 5 fingers to cross 1 finger, and try to avoid the whole hand and arm being clamped to the inside of the body as much as possible, and try to let the ants take the initiative to cross 1 finger by themselves, and the wrist and arm can naturally follow the fingers to move.

    5. Wearing fingering: only 1 finger (thumb) can be worn, and only 2, 3, or 4 fingers can be worn, when using fingering, it should be noted that 1 finger can not wear 5 fingers, and it is taboo to wear 5 fingers.

    For example, when the melody of the right hand continues to ascend, you should use fingering to move the handle to the right to play a higher note, so that the melody can be played coherently and smoothly. When practicing, 1 finger through 2 fingers, 1 finger through 3 fingers is more often used than 1 finger through 4 fingers.

  6. Anonymous users2024-02-01

    The basic fingering of the piano is as follows:

    Straight fingering. Five fingers in the fifth interval, maintaining the basic hand strumming. This fingering is a finger alignment with one key, and five fingers are arranged on five keys in sequence, with no intervals between the keys.

    This is the most basic and most important fingering. Articles 1-62 of "Basic Piano Course of Worship and Arrest Sun'e", and 1-18 of Czerny's 599, are basically straight fingering.

    Extended fingers. Five fingers play with an extended hand on intervals greater than fifths. The tiger's mouth between the big finger and the index finger is an advantageous condition for extending the hand.

    The melody of the sixths interval is played in the hand shape of the sixth, with the distance between the first and fifth fingers being six degrees, with one key between the first and second fingers and the rest of the fingers arranged in a finger arrangement.

    The melody of the octave is played in the octave hand shape, the distance between the first finger and the fifth finger is an octave, the distance between the first and second fingers is generally maintained between the fourth interval, and the third and fourth fingers move between the second and fifth fingers according to the needs of the melody. All kinds of long arpeggiation exercises are used to change the chain, which is the finger extension method.

    Fingering. Five fingers play with a constricted hand on less than fifths. Melodies that go up or down in a meandering way can be balanced by this fingering. All kinds of short arpeggio exercises are used in this kind of fingering.

    The more fingering. Also called transfingering. It is will.

    The second, third, and fourth fingers move over the big fingers and play the handle. The melody should be moved to the left with the fingering method to make the melody play coherently and smoothly. When playing the descending scale, use the cross-fingering technique. Fingering: Thumb through.

    Two, three, and four fingers move to play.

    The melody continues to ascend, and the handle should be moved to the right with fingering to make the melody play coherently and smoothly. When playing the ascending scale, fingering is used. Immediately after moving the handlebar, switch to forward fingering or extended fingering, and fingering and fingering are two complementary fingering techniques, and are often used in combination when playing.

  7. Anonymous users2024-01-31

    1. There are four basic fingerings for the piano:

    Finger piercing, where 1 finger passes under 2 or 3 or 4 fingers to play the fingering of higher notes.

    Spanning the tent fingers, i.e. 2 fingers or 3 fingers or 4 fingers crossing over the top of the 1 finger and missing fingers to play the lower notes.

    Bracketism, i.e., the extension of the fingers, is the fingering of the fingers horizontally, the sum of the two fingers to touch the key and the hand index between them is less than the number of intervals of the two chains to be touched.

    Finger contraction, or finger contraction, refers to the fingering of the fingers that are contracted horizontally so that the sum of the two fingers to touch the key and the hand exponents between them is greater than the number of intervals of the two keys to be touched.

    Please click Enter a description.

    Piano. 2. Beginners should pay attention to the following points when learning piano:

    To prevent "stubborn fingering errors", it is best to fix the fingering when learning stave for the first time. The correct fingering of "first entry" is especially important.

    Prevent "bad fingering cycles". Many children often have disobedient fingers during practice. The most typical is to use 3 fingers instead of 4 fingers, and it is not possible to switch between C major and C minor.

    Fingering of skipping sounds. In fact, skipping is just a form of articulation, while the principle of fingering is the same as that of legato.

  8. Anonymous users2024-01-30

    1. One-to-one fingering:

    One-to-one fingering is the most basic and simplest fingering for practicing piano, which can be one-to-one with black and white keys, or one-to-one with simple black or white keys.

    2. Fingering: Fingering, as the name suggests, is a method of passing one finger through one or even more fingers, and the commonly used fingering method is one finger through the first.

    The second and third fingers, such as those in C major, are used when playing fingering.

    3. Yue fingering: Yue fingering is used to play lower notes, when the span of both hands is relatively large, the second or first.

    Third, the fourth finger passes through the top of one finger, here it should be noted that only other fingers can pass through one finger, and the fourth finger can not pass through the third finger or the second finger, which is not standardized.

    4. Finger expansion: When the syllables of the finger are larger than the span between the fingers, we need to use the finger expansion method. Finger expansion can be done with any two fingers, and there are no fixed requirements and specifications.

  9. Anonymous users2024-01-29

    The most basic is a finger facing a keyboard. The five fingers correspond to the five sounds of do, re, mi, fa, and so.

    1.Finger piercing is also called "thumb dive", and some people call it "burrowing", which is the fingering of 1 finger passing through the mountain land below 2 or 3 or 4 fingers to play a higher note.

    2.Fingering Five fingers in a fifth, maintaining the basic hand strumming. This fingering is a finger alignment with one key, and the five fingers are arranged on the five keys in turn, with no gaps between the keys.

    3.Finger crossing, also known as "thumb crossing", is the fingering of 2 fingers or 3 fingers or 4 fingers crossing over the top of the 1 finger to play a lower note.

    4. Finger contraction, also known as finger contraction, refers to the fingering of the fingers that are horizontally tightened, and the sum of the two fingers to touch the key and the hand index between them is greater than the number of intervals of the two keyboards to be touched.

    5.Fingering, as the name suggests, is that the hand is wide open. One-to-one five-finger fingering, only five keys.

Related questions
11 answers2024-02-09

It's not the same, the electronic organ is simpler than the piano, and the keys don't play the piano harder. >>>More

8 answers2024-02-09

Don't believe what these people say, it's all the trust of the piano store. It is also sold to more than 40 countries around the world, an OEM piano, you can blow it, Pearl River piano has been exported to 112 countries around the world until 2019, Kaiserburg's KA artist series has long surpassed the original Japanese Yamaha and kawaii, in 2004, a European branch was established in Munich, Germany, selling Ritter Miller made in China, the original Rotherer factory has long been closed, and was acquired by PETROF in China by Helen to do OEM, Xuancheng used PETROF technology, drawings, misleading customers to say that it is a joint venture piano, Most of the piano are universal parts, all have to be imported, what kind of capital, the piano spelling is the selection of materials and technology and the finishing and debugging of the later technicians, to see the original Petrof's timbre, and then look at Rosser, you will know, just like Lafite and Lafite's Lafite Legend, ** brand Lafite sells more than 10,000, its OEM sub-brand sells hundreds, and the profit is still very high, the profit of this kind of piano is high, in China is for the Chinese market, there is no such piano on the international piano quality rankings, buy Petrof to buy Czech products, don't fool people with Rosser's OEM piano.

10 answers2024-02-09

It will not be good for the piano, and it will rust if it is not played for a long time.

24 answers2024-02-09

First of all, we must ensure that the right amount of practice every day, but don't rush for quick success, because the beginner piano is unremitting, when it is very boring, it is all scale practice, or etudes, but when these are connected, you can play many world famous songs, I have been practicing the piano for 9 years, I am 14 years old this year, and I have passed the piano grade 10, these years of experience tell me that as long as you persevere, you can succeed! >>>More

12 answers2024-02-09

I am fascinated by the piano, I am learning the piano, I know the difficulty of learning the piano, I was learning because I like to learn the piano, but learning the piano is very hard, and I now regret that I chose to learn the piano. But it's okay, I've passed grade 10 in piano, hehe >>>More