What can be used to dissolve soap, and how to melt fertilizer soap

How to melt fertilizer soap.

1.Put the soap head in an enamel (or plastic) container, place it in a pot of water, add water, and heat, 2Once melted, pour it into the mold and let it cool.

What makes soap dissolve quickly?

1 Acid can make soap dissolve quickly, for example, common vinegar can accelerate the dissolution of soap.

2. You can use a tool to cut the soap into small pieces, put it in a basin, pour appropriate water to dilute it and stir it, which will dissolve much faster.

3. Heating the solvent can also achieve the purpose of rapid dissolution.

Soap is an alkaline salt with a pH composed of fatty oils (mainly vegetable oils) and salts, and can be quickly dissolved by adding acid and its reaction.

Extended information: Substances dissolved in water usually go through two processes: one is the diffusion process of solute molecules (or ions), which is a physical process that needs to absorb heat; The other is the process of forming solvent (hydration) molecules (or hydrated ions) by the interaction of solute molecules (or ions) and solvent (water) molecules, which is a chemical process that emits heat.

When the heat released is greater than the heat absorbed, the temperature of the solution will rise, such as concentrated sodium hydroxide sulfate; When the heat released is less than the heat absorbed, the temperature of the solution will decrease, such as ammonium nitrate, etc.; When the heat emitted is equal to the heat absorbed, the temperature of the solution does not change, such as sodium chloride sucrose, etc.

After the solid solute enters the solution, the diffusion (endothermy) process of particles (molecules or ions) first occurs, followed by the hydration process (exothermic) of hydrated ions or hydrated molecules, and the destruction and formation of chemical bonds here are strictly physical-chemical processes, in fact, for strong electrolytes, dissolution and ionization are difficult to separate, because the diffusion of ions is ionization.

However, for weak electrolytes, the first is diffusion into molecules (endothermy), and then under the action of water molecules, the chemical bonds are broken and ionized into free ions (hydrated) (the overall performance here is endothermic or exothermic depends on whether it takes more energy to break the chemical bonds, or whether hydration releases more energy).

What makes soap dissolve quickly?

Water can be dissolved, but by dissolving naturally (not **), the rate is really slow. You can try using hot boiled water with a small amount of acid (preferably sulfuric acid, salt.

What does soap melt quickly?

If your purpose is only to melt quickly, it is to roast (burn) directly over fire; If you use other media to help it melt quickly, it is hot water, and it is heated constantly.

How soap melts quickly.

Soap hydrolysis is the best way to speed up. The main ingredient of soap is sodium stearate, and the molecular structure of his soap can be divided into two parts. One end is charged.

What makes the soap dissolve quickly.

There are several ways to do this:1If you flush with water, the soap will be blocked, and it may just get stuck, but if you flush it with more water, it may be all at once.

When melting fertilizer soap, you need to cut the soap into smaller pieces, place the cut soap block in a heated container, and heat it with water to melt the soap easily. The melted soap can be poured into any mold, and then placed at room temperature to cool naturally to remove from the mold, and can be placed in the refrigerator if you want it to solidify quickly.

Soap is a necessity in daily life. When the soap runs out, there is always a small piece left. It's not easy to take a bath, and it's a pity to lose it.

It's really like chicken ribs, "it's hard to wash it, it's a pity to throw it away"! So, what do you do with the small pieces left over after the soap is used up? Here are 2 ways to dispose of small soaps, which are environmentally friendly and thrifty.

Tools Raw materials.

More Heating equipment such as crucibles, stoves, thermostats, soap molds, or stainless steel teacups Small pieces left over after the soap is used up.

Method steps.

1 7 Step by Step Reading.

The first method is the most commonly used, and that is to wash clothes. Soap can be used for bathing and washing clothes, and it has a good degreasing function.

The second way is to reshape a piece of soap. First of all, it is necessary to accumulate small pieces of leftover soap that have been used up before and store them in a clean environment to avoid contamination of the reconstituted soap.

Jingdong soap top ten rankings bathed in fragrance, the whole body lingers! Ad.

When the soap cubes have accumulated to a certain amount, it is time to start reshaping the soap.

Which is better, soap liquid or laundry detergent, Liby for cleaning and sterilization, natural washing and protection, and guarding green health advertising.

Scrape the soap into small pieces and heat them in a crucible until they melt. (Heat-resistant glass containers and cooktops are commonly used for heating.) ）

Find soap powder, on Alibaba, factory direct sales, source factory goods! Ad.

Once melted, pour the liquid soap into the soap mold (any suitable container is sufficient, even with a soap dish). ）。

After a while, the soap will condense after cooling, at this time, turn the container upside down, gently tap the container, and a piece of new plastic soap is completed!

(1) Calcium hydroxide is alkaline and can be used to improve acidic soil in agriculture, so fill: calcium hydroxide (2) Sodium hydroxide is a substance that can be used to make soap, so fill: sodium hydroxide (3) Dilute hydrochloric acid and limestone reaction can produce carbon dioxide, which can be used to prepare carbon dioxide gas, so fill:

Dilute hydrochloric acid, limestone

4) Calcium hydroxide can be used to prepare pesticide Bordeaux liquid, so fill: calcium hydroxide

12 Wonderful Uses of Soap

Remove mold and stain! Get rid of odors! Super practical.

1. Remove mildew.

If there are mildew spots on leather clothes, you can wipe them repeatedly with a towel dipped in soapy water, remove the dirt, and immediately scrub them with water, and after drying, the mildew will disappear.

2. Remove musty odor.

During the rainy season, there will inevitably be a musty smell in drawers and wardrobes, so putting a piece of soap with the wrapping paper removed in the wardrobe and drawers can effectively remove the musty smell.

3. Clean the trash can.

The trash can can be cleaned with a baking soda brush and then scrubbed with some soapy water to remove the odor of the trash can.

4. Stop the itch of the calendar**.

If you are bitten by a mosquito, dip a little soap in water and apply it to the bite area, which will quickly relieve the itching.

5. Lubricate the blinds.

If the blinds are difficult to pull, you can apply soap to the drawstring of the curtain, and after pulling back and forth a few times, it will be much easier to close the curtain.

6. Prevent sweat erosion.

Apply soap to the metal shell of the watch, and then wipe it clean with a dry cloth to prevent sweat acid erosion.

7. Clean the black spots at the bottom of the pot.

Before using the new aluminum pot, apply soap to the bottom of the pot, so that the black spots on the bottom of the pot will be easier to wash off.

8. Help with cutting.

It is difficult to cut rubber and leather with ordinary knives, so it is easier to cut by applying some soap to the blade.

9. Glasses are waterproof and steam-resistant.

In winter, when you go indoors from outside or drink hot soup, your glasses are always covered with a white fog that makes it difficult to see. Applying the lenses with semi-dry soap and polishing them with a glasses cloth will prevent fogging.

10. Induce vomiting.

If someone accidentally ingests a foreign body or drug, you can drink some soapy water before seeking medical attention and spit out the foreign body, which is beneficial**.

11. Insecticide.

After the furniture is eaten by insects, you can use soap to block the hole, or pour thick soap into the limb or hole to kill the insects, or you can directly block some small ant nests.

12. Move furniture.

When moving heavy items on the mound, apply some soap to the mound, and it will be easy and labor-saving to move.

Soap can be used to lubricate, remove musty odours and prevent insects, clean trash cans, apply wallpaper and check for gas leaks.

1. Lubrication. Nowadays, many families like to use blinds to decorate when decorating, but the blinds are difficult to pull after a period of time. Just apply some soap to the lever or drawstring and pull it back and forth a few times, and it will be easy.

2. Remove mildew and prevent insect damage.

Putting soap or soap in your furniture or wardrobe is not only effective in removing musty odors, but also prevents insect damage.

3. Clean the trash can.

After the trash can has been used for a while, there will be an unpleasant smell inside, if you wash the trash can with soapy water or soapy water, and then sprinkle some baking soda after cleaning, so that the odor in the trash can can be successfully eliminated.

4. Scatter soap before sticking wallpaper.

When decorating the house, if you need to paste wallpaper, you can come to him with a small innovation: add some soap to the paste, so that it is much easier to paste wallpaper, and the wallpaper will be more firm. Digging belts.

5. Check for gas leakage with soapy water.

If there is a leak in the gas pipe in your home, you can apply soapy water to the pipe to check the location of the leak so that it can be repaired as soon as possible.