SolidWorks template switching issue

1. Set the template you want as the default template of the system, the method is: tool --- options--- system options--- default template--- select the template you want; 2. Save the files of the old template in IGS format; 3. Open the IGS file you just saved (the system will enable the default template you set to open), and after opening, the system will prompt: "Whether to diagnose the file" Select, and then the system will prompt:

Do you want to perform feature recognition?" select Yes, now the template of this file is the default template you set, and this part is also a feature, you can make and modify, but its characteristics may be different from the ideas and steps you modeled at that time.

The premise is that you must have the Feature Works plug-in installed in SOLIDWORKS.

Add this group 751 to communicate,. 712 。。75, and the numbers are connected to the group number.

Lad! You don't seem to understand what a template is? You're talking about format, huh? You're going to change the format of the old drawings in batches, right?

The template is the one we choose to use to create a new diagram!

SOLIDWORKS Default Template Invalid Setup Method:

Brand model: ASUS UX30K723A

System version: win7

Software version: SOLIDWORKS software.

1. At this time, start the software first, do not open the model, click the tool options above, menu, there are more functional items, look down.

2. At the bottom of the tool menu, you can see the plug-in, customization and other options, the penultimate item is "Options", click on it to enter the configuration interface.

3. At this time, you can open the system options interface, and a number of settings will be listed on the left side, click on the "default template" to enter the settings.

4. You can see that the template of the part diagram and the transligand has been pointed, and the last point is the Chinese name (actually the reason for sinicization, there is no template with a Chinese name under the folder), and the three dot icons behind the part here.

5. At this time, you can enter the new selection interface, you can see that there are already recommendations, that is, "GB Assembly", if there are other options, you can generally use the recommended ones, select the item, and click "OK".

6. Finally, the template behind the parts and assembly drawings is all set to the existing ones in the software directory, which can be seen as modified. The next time you open a file in stp or other formats, there will be no more prompts.

SOLIDWORKS is a subsidiary of Dassault Systèmes, which develops and sells Windows products for mechanical design software, which is based in the United States, and SOLIDWORKS is a very good drawing design software. Many people have encountered the situation that the default template is invalid when using SOLIDWORKS, and how do you solve this problem? Here is the method of invalid change of the SOLIDWORKS default template

How to change the SOLIDWORKS default template invalidly:

Start by opening SOLIDWORKS and creating a new part file.

Once opened, tap the gear icon at the top of the interface;

In the pop-up window, select the default template on the left.

Then click and orange click the ellipsis button behind the assembly input box on the right;

In the pop-up window, select the desired template and click OK.

Return to the previous window and click OK again to replace the default template.

Learn the above operation method, and don't worry about the default template being invalid in the future, take it and follow the steps, and you will soon be able to change a new template to use

I'm so anxious about this question. Now I found a way to create a new part (of course, you have to choose the template you want first). Then click "Insert" in the toolbar and select "Part" (select the part you want to change the template).

Finally, it is enough to save and replace the previous part. Of course, if you use the assembly drawing of the previous part, you have to reassemble it...

It's the template of the drawing, right-click the blank space of the drawing, the property, and you can change the drawing template.

Feel free to change the tree next to it.