In the sunny corner, how to close the wallpaper?

Generally, the yang corner is close to the door, so just fold the wallpaper and paste it to the end, and the yang corner is left with an ugly closure, so it is a waste of points, all pasted!

Solution 1:

The wallpaper can't be closed in the sunny corner, and there will be a side if you don't do it, and it won't be warped if it's pasted well under normal circumstances. Mature designers generally do not design like this, the wallpaper is just designed to the corner of the corner, the landlord can continue the wallpaper to the other side of the bar to close the position of the corner;

Solution 2:

It is recommended to install a closure strip, which can be a flat line or an "L" shaped line, preferably made of solid wood or stainless steel, and the plywood line is not very easy to use. There are also PVC line closures, but they are not suitable for use in the living room.

If you paste the wallpaper itself, the corner closure is already a design failure, and the above are just 2 remedial measures.

Technologically speaking, the yin feet and yang can not be closed, and the corners must be crossed, and if you need them, you can also buy a yang corner seal.

Push the hem over and don't let the hem sit right on the corner.

Wallpaper never closes around corners.

It would be nice to make the yang angle into an arc.

At the sunny corner, the method of pasting the wallpaper is as follows to avoid the difficulty of the later stage.

Step 1: Use a scraper to carefully glue the wallpaper over the convex corners, but not against the other wall.

Step 2: Use your hands to make folds at the corners of the convex wall from top to bottom, and draw vertical lines from the convex wall from the ceiling to the floor.

Step 3: Cut the wallpaper along the above vertical line with a utility knife, guided by a ruler.

Step 4: Carefully remove the rest of the wallpaper and place it on the workbench for later use.

Step 5: Use the seam pressure wheel to level the outer part of the wallpaper, and then add glue on the wallpaper pasted on the cover.

Step 6: Frame the wallpaper pasted, put together the pattern, scrape the wallpaper with a scraper, and flatten it with a pressure wheel. Paste the wallpaper in the dark corner.

When pasting wallpaper, you can apply white glue at the edge of the sunny corner, which is also a method often used when pasting wallpaper.

The wallpaper edge at the sunny corner can be brushed with white glue and pasted.

Now there are metal strips on the market for wallpaper closing, and you can see more colors in the market...

Now there are many corners on the market, yang angle and yin angle line, generally at 5 yuan a piece, 2 meters a piece. Stick these on and keep them level with the wall, and the effect is absolutely good. (Note: I focus on wall design and decoration.) ）

Nail a wood line first, plywood or wood line, preferably double-layered, stainless steel folding edge buckled on the wood line

We have two ways to paste stickers at the sunny corners: First, directly wrap the wallpaper. Second, make a metal corner protector or glass corner protector outside the sunny corner to protect it.

From a professional point of view, we generally do not recommend sticking wallpaper in such places, or we will recommend pasting it a little bit in the past. If this is the case today, our advice to our customers is to press it with a wooden wire or seal it with an aluminum alloy strip.

It's easy to warp the wallpaper, if you don't want to use lines, you can use colorless transparent glass glue to collect it.

Use glass glue to glue the stainless steel directly on it, and the glue can't be removed after drying.

Stick the edge of the wallpaper into a millimeter or two... Don't be on the same level as the sun... Absolutely....

How to deal with the wallpaper in the sunny corner:

Use a scraper to carefully apply the wallpaper and step over the convex corners, but not against the other wall.

Use your hands to fold the corners of the convex wall from top to bottom, away from the convex wall 25cm draw a vertical line from the ceiling to the floor.

Use a utility knife to cut the wallpaper along the above vertical lines, guiding with a ruler.

Carefully pull off the rest of the wallpaper and place it on the workbench for later use.

Use the seam pressure wheel to level the outer part of the wallpaper, and then add glue on the wallpaper on the cover.

Frame the wallpaper on the cover, put together the pattern, scrape the wallpaper with a scraper, and flatten it with a pressure wheel.

It is best to use crimping. When sticking stickers, you can also stick them to both sides with the yang angle line as the center, but you should ensure the effect on the flowers.

Not a roll of wallpaper is 1 meter wide.

When doing it, the yang angle position should be 500 on both sides.

The simplest and most limited way is to buy corner guards and use them at the corners of the sunny corners, so as to solve the problem of excessive wall surface without worrying about the wallpaper will warp or crack in the future.

Press it on top with a wood grain strip that is pressed with edge, and the wood grain will not be ugly.

Press it with stainless steel or aluminum buckles