What is the distance between a street light pole and a utility pole 50

The distance between the street light pole and the power pole is based on the actual situation, and there is no fixed standard distance. In urban or rural roads, light poles and utility poles are often placed at a distance to provide adequate lighting and electricity**.

First, let's look at urban roads. In urban roads, the distance between street light poles and utility poles is usually determined based on the width of the road and the lighting needs. In general, the wider the road, the greater the distance between the light poles and the utility poles.

This is to ensure that the illumination range of the street lights covers the entire road, while avoiding interference between the poles and the poles.

In country roads, the distance between street light poles and utility poles also varies. Since rural roads are usually narrower, the distance between street light poles and utility poles is relatively small. This is to save space and ensure that utility poles and street light poles do not obstruct traffic and pedestrian traffic.

In addition, the distance between street light poles and utility poles is also affected by other factors such as terrain, buildings, and transportation facilities. In some cases, the distance between the light pole and the pole may be adjusted due to special road layouts or constraints.

In general, the distance between the street light pole and the utility pole is determined according to the actual needs and safety requirements. Planning and design will be based on the characteristics and use of the road to ensure that the street lights and electrical wiring are arranged to meet the lighting and power needs, without affecting the safety of traffic and pedestrians. As a result, the exact distance will vary depending on the region, road type, and design criteria.

Streetlight**. Upper caliber + lower caliber (m) divided by 2

Multiply by thickness (mm) multiply by height (m).

The weight of the rod.

The height of the street lamp is generally 6 8 10 12 meters The specific use should be based on the width of the road surface If the lamp is generally unilaterally distributed, the height of the street lamp is consistent with the width of the road surface Or the height of the street lamp is less than the width of the road surface 1 meter The spacing of the street lamp is generally a multiple of the height of the lamp pole Sodium lamps are not commonly used are 150w 250w 400w 150w is generally suitable for 6 meters below 250w is suitable for 6-10 meters and more than 10 meters are generally 400w.

<> cities are different from mountainous areas. In the city, the distance between the two suns and the telephone poles is between 30-50 meters, and the mountainous or wild ones depend on the terrain, generally 100-300 meters.

<> cities are different from mountainous areas. In the city, the distance between the two telephone poles is between 30-50 meters, and the mountainous or wild ones depend on the terrain, generally 100-300 meters.

Summary. The distance between ordinary power poles is 50 meters, and the distance between high-voltage lines is 200 meters.

Hello dear and happy to serve you. Wheel Zen ordinary telephone pole: 50 meters High voltage line:

200 meters The horizontal safety distance from the building is as follows: below 1 thousand volts Meters 1 - 10 thousand volts Meters 35 thousand volts Meters 66 - 110 thousand volts Meters 154 - 220 thousand volts Meters 330 thousand volts Wax dust 500 thousand volt meters.

The distance between ordinary power poles is 50 meters, and the distance between high-voltage lines is 200 meters.

Of course, these are only theoretical distances, but in practice, it still depends on the terrain of the celery orange countryside to decide, some terrain is rugged and the distance will be slightly farther away, and if the terrain is flat, the distance will be closer.

Summary. Hello, Legal Analysis: National Standard for the Distance Between Telephone Poles and Roads:

Not less than 5 meters. Under normal circumstances, the distance between the pole and the road should not be less than 5 meters. 1. Vertical distance:

The power line voltage level is less than 1kV; Rice; Power line voltage level 1-10kV; 3 meters and so on. 2. Horizontal distance: power line voltage level below 1kV

1 meter; Power line voltage level meters and so on. The distance between the pole and the road must not be less than 2 meters, but there are exceptions. There is no way to limit the venue.

But it should not be less than 1 meter.

Hello, legal analysis: the distance between the pole and the road is not less than 5 meters.

Under normal circumstances, the distance between the pole and the road should not be less than 5 meters. 1. Vertical distance: the voltage level of the power line is less than 1kv; Rice; Power line voltage level 1-10kV; 3 meters and so on.

2. Horizontal distance: power line voltage level below 1kv: 1 meter; Power line voltage level meters and so on.

The distance between the pole and the road must not be less than 2 meters, but there are exceptions. There is no way to limit the venue. However, it should not collapse less than 1 meter.

Legal basis: "Regulations of the People's Republic of China on Highway Management Reputation Congxiang" Article 31 The construction of permanent engineering facilities on both sides of the highway shall be the distance between the edge of the building and the outer edge of the highway ditch; The national highway shall not be less than 20 meters, the provincial road shall not be less than 15 meters, the county road shall not be less than 10 meters, and the township road shall not be less than 5 meters.