What is the reason why the treadmill does not start, and why can t the treadmill start?

Possible reasons why the treadmill cannot start: 1. The power supply is not on; 2. The fuse is blown; 3. The switch of the electric treadmill is broken; 4. For other reasons, please contact our professionals. Workaround:

1. Please check the power supply; 2. Replace the fuse; 3. Replace the power switch.

One: the pits to avoid when buying a treadmill.

1: Motor power.

The greater the power of the motor, the greater the output and load-bearing, and the higher the stability, but the power consumption and ** will also increase, horsepower.

Loud noises naturally increase. Therefore, for ordinary people, the continuous power is enough, and the bearing capacity of about 100kg can basically meet the needs of most people. So don't blindly pursue high power.

2: The size of the running belt.

Generally speaking, the larger the running belt, the more comfortable and safe it is to run. However, when purchasing, it should be noted that what some merchants say is the area containing the edge strips, which is misleading to consumers, so be sure to ask about the design area of the running belt of the merchant. Generally, the width of the running belt is between 42-52cm, and those with a petite body can choose 42-45cm, and friends with a wide body are recommended to choose more than 45cm.

As for the length, 120-130cm is suitable for friends under 170cm tall, if it is taller, it is recommended to choose more than 130cm.

3: Shock absorption. Shock absorption system for the ankles.

Achilles tendon, knee and other joint protection plays a very important role, but the treadmill naming on the market is chaotic, the main principles are swing arm shock absorption, airbag shock absorption, silicone shock absorption and soft running board shock absorption. Although there are many shock absorption methods, they are basically derivatives of silicone and springs, don't be confused by the so-called shock absorption concept, as long as the motor of the treadmill is good, the horsepower can carry your weight, and there is no problem with the overall frame and material. Therefore, there is no need to worry about these treadmills for about 2000, and it is recommended to pay attention to the brand and service.

Basic parameters. Machine net weight: 41kg

Peak Horsepower: Width: Length:

Height: Running belt length: 120cm

Rated power: 1hp

Maximum load: 130kg

Maximum speed: 14km h

Recommended reason: high appearance, very fine workmanship, very stable running, non-slip design, wide enough running belt, and very small sound. It can be folded, does not take up space, is very smart to use, and is particularly easy to store. And ** very affordable, cost-effective.

The treadmill messed up the start button and there was no response.

Summary. Hello dear! There are several general reasons why the treadmill does not start:

1.After the treadmill is powered on, the display is normal, and the treadmill does not rotate after pressing the start button. Generally, the motherboard under the treadmill is broken or the motor is broken, 2

The treadmill has a part called the "safety button" (also called the "safety lock"), this safety lock is not on the treadmill, and the treadmill cannot be started.

3.Caused by poor line contact in the control panel.

4.There is a problem with the internal parts of the machine.

What is the reason why the treadmill does not start?

Hello dear! There may be several total reasons why the treadmill does not start:1

After the treadmill is powered on, the display is normal, and the treadmill does not rotate after pressing the start button. Generally, the motherboard under the treadmill is broken or the motor is broken, 2The treadmill has a part called the "safety button" (also called the "safety lock"), this safety lock is not on the treadmill, and the treadmill cannot be started.

3.Caused by poor line contact in the control panel. 4.

There is a problem with the internal parts of the machine.

How much does it cost to repair.

Dear to this you and the repair staff to communicate, we can not give you the accurate **.

One. The fuse is damaged.

What is the reason why the treadmill does not start.

If the load is too heavy or runs for a long time, it will speed up the damage of the treadmill, increase the heat dissipation capacity of the motor, and still can't start after cooling, it may be that the fuse is blown out, it is recommended to use it as required, do not exceed the maximum load capacity of the treadmill, the maximum load capacity is generally 95kg.

Two. The motherboard is damaged.

What is the reason why the treadmill does not start.

If there is no fault flashing at the beginning of E** and the sound of Didi on the display, this situation is generally that the motherboard is burned out, and the treadmill cannot be started at this time, which requires a professional to repair it.

Three. The belt slipped.

What is the reason why the treadmill does not start.

Slipping belts can also cause problems on the treadmill, as long as the belt of the motor is connected to the belt of the roller.

Reason: Generally, there is a problem with the internal wiring, and the wiring needs to be checked, so it is recommended to contact the after-sales service to solve it. Common use problems of treadmills:

If the treadmill buttons are not working, it may be that the keys are aging or the key circuit board is becoming loose.

The treadmill LCD screen is not displayed, it may be that the internal circuit board is faulty.

The feeling of unsmoothness when running may be caused by the loosening of the running belt, which can be adjusted according to the instructions of the manual, and the treadmill needs regular maintenance, such as adding lubricating oil.

The failure of the treadmill to accelerate may be due to the poor contact of the cable joints, or it may be that there is a problem with the motor control board, and you need to contact the after-sales service to solve it.

Before using the treadmill, you should do a good warm-up exercise, pay attention to adjust the speed, and generally exercise for 40 minutes. Data Expansion: Treadmill is a common fitness equipment in homes and gyms, and it is the simplest type of home fitness equipment today.

Hello dear I am honored to have your question, if the load is too heavy or running for a long time, it will speed up the damage of the treadmill, increase the heat dissipation capacity of the motor, and so on after cooling or can not start, it may be that the fuse is blown out, it is recommended to use it as required, do not exceed the maximum load capacity of the treadmill, generally the maximum load capacity is 95kg. Two. What is the reason why the treadmill is damaged and does not start If there is no fault flashing with e on the display screen** and the sound of Didi, this situation is generally that the motherboard is burned out, and the treadmill cannot be started at this time, so it is necessary to find a professional for repair.

Three. What is the reason why the treadmill does not start, the belt slipping will also cause problems in the treadmill, as long as the belt of the motor is connected with the belt of the roller, I hope it can help you.

Possible reasons why the treadmill won't start:

The power supply is not working; fuse blowing;

The switch of the electric treadmill is broken;

Possible causes: 1. The power supply is not working; 2. The fuse is blown; 3. The switch of the electric treadmill is broken; 4. For other problems, it is recommended to contact professionals for maintenance.

Solution: 1. Please check the power supply; 2. Replace the fuse; 3. Replace the power switch.

Check whether the power supply is electric, whether the plug is secure, whether the treadmill fuse is burned, and then the machine is faulty.

There are some reasons for the poor contact of the line, power failure, aging and disconnection of the line, key failure, mechanical failure and other influences that cause the treadmill to not start.

Check the power strip, if it is connected to the power supply or it still does not work, it is recommended to read the instruction manual carefully, and then you can call customer service. I hope mine can help you, and I hope you have a strong body soon, hopefully.

The treadmill can't start, you have to check whether the power supply is three-one? Well, starting the second is whether your treadmill is broken, and the third is whether the treadmill is broken? Well, improper operation? The fourth question is whether the treadmill may have broken down?

Maybe something went wrong, a part was broken, maybe the wire was broken or degummed, let the repairman check it.

If the treadmill can't start, the first thing is to see if it's plugged in, the second is to turn on the switch, and to increase the speed, etc., you can see for yourself.

If the treadmill does not start, it may be that it is not connected to the power or it is broken.

It may be that the contact is not good.

The treadmill can't start, check if the power supply is plugged in?

Check whether the power supply and the bottom switch of the treadmill safety switch are broken, and it will be warranted.

1.Check the motor first, it's normal! Remove the motor drive board, remove the 24x relay, power on to check the contact connection status, and find that there is no time to on, it should be the contact burned.

After disassembling the relay, it was found that the contacts were indeed a little burnt, but it was not serious, and it was put back after a little polishing.

2.The bridge stack, electrolysis, drive power tube, and output rectifier tube are all normal.

3.Check the contact status of the PIC16F716 socket of the main control, the crystal oscillator, etc., all of which are normal.

4.Check the major power electric positive on the driver board, the result is found that there is an electric positive open circuit of -220K9 2W, the resistor is connected to the large electrolytic filter and leads to the main control PIC16F716 17 pins, it is estimated that the sampling protection circuit is made, replace the electric positive (220K92) after the boot, everything is normal.

How to turn on the treadmill.

1. The treadmill will have a mode of selecting exercise, and it is recommended that you choose according to your personal physique and amount of exercise. For the treadmill for home use, I suggest that you choose to turn on the quick start mode, so that you can press to other modes at any time during the exercise, so that you will not fall down during the exercise because of the high intensity of the exercise and the inability to change the mode.

2. When running on the treadmill, remember, keep your eyes on the front, not look left and right, it is best to put something in front of you, and when running, you can keep looking at that thing, so that in the process of exercise, there will be no deviation and be thrown out of the sports belt by the treadmill.

Specifically, you can ask the customer service of the treadmill brand.

Reason: Generally, there is a problem with the internal wiring, and the wiring needs to be checked, so it is recommended to contact the after-sales service to solve it. Common use problems of treadmills:

1. The treadmill buttons are not working, which may be due to the quiet aging of the keys or the loose circuit board of the buttons. 2. If the LCD screen of the treadmill is not displayed, it may be that the internal circuit board is faulty. 3. The feeling of not feeling smooth when running can be caused by the loosening of the running belt, which can be adjusted according to the instructions of the manual, and the treadmill needs regular maintenance, such as adding lubricating oil.

4. The treadmill cannot be accelerated, which may be due to poor contact of the cable joints, or it may be that there is a problem with the motor control board, which needs to be solved by contacting the after-sales service. 5. Before using the treadmill, you should do a good warm-up exercise, pay attention to adjust the speed, and generally exercise for 40 minutes.

Summary. First of all, cut off the power supply, prepare the materials, and remove the switch with the broken safety of the treadmill. Then, install the new switch according to the original appearance, and that's it.

Hello, glad to answer for you; Possible reasons why the trembling machine cannot be started: 1. The power supply is not connected. 2. The fuse is blown;

1. Please check the power supply; 2. Replace the fuse; 3. The only way to change the power switch is to lose.

Yijian treadmill, the machine voice said, the cutout switch is not in position, what's going on?

The cutout switch is broken, first of all, cut off the power supply with the local sensitive, prepare the materials, and remove the switch with the treadmill fuse broken. Then, install the new switch according to the original shape of the branch, and that's it.

The cutout switch is looking for it in **.

The location of the cutout.

The safety lock is generally magnetic at the lower position of the treadmill panel, and there is also a plug-in type, one end has a wire rope to link a clip, and the clip must be clamped in the clothes during exercise. If the safety lock is broken, you can go to the after-sales department to replace it.