Can Xiaomi max flash the phone, how to flash the Xiaomi MAX2? Xiaomi MAX2 flashing tutorial

The system itself does not provide root:

2.In such a situation, you need third-party software to root, Tencent Mobile Manager, Wandoupod, Root Master and so on. Connect the computer through a data cable to root, take root master as an example.

3.Connect your phone to your computer. After a successful connection, select "One-click Root".

During the process, the phone will automatically restart several times (remember not to unplug the cable). Halfway through, the phone will prompt you to install the software required for root, click to install and then the phone will enter a reboot.

Succeed. Icons will be displayed on the desktop of the phone.

2.Open the line brush, switch to the one-click brick rescue interface, and click the "OK" button after completing the "Confirm steps before flashing".

3.If you have a local brushless package, you can enter the model in the search box, click the "Search ROM" button, and click the "One-click Flash" button in the search results to start flashing the package-**After completion, click "Flash Now" to start flashing:

4.If there is already a flash package locally, click the "Select Local ROM" button to open the interface for selecting a RAM package, and click the "Open" button after selecting the flash package

5.Enter the parsing package page

6.After the unpacking is complete, start scanning the flashing port:

7.Install the flashing driver:

If it is the first time to start the line brush, or you have not installed the flash driver, please click "Fully automatic installation of the flash driver":

Enter the installation driver interface, if the Windows security prompt pops up, click "Always install this driver software":

8.After installing the driver, if the port cannot be scanned for a long time, you can manually enter the flash mode according to the interface operation guide

10.Jump to the flashing success interface, and the flashing is complete!

You can use Xiaomi Assistant to flash the phone.

2: The phone enters recovery (the recovery at this time must be the official recovery, because the official recovery can brush Xiaomi's official flash package), and then the phone is in the shutdown state, press and hold the volume up button + power button of the mobile phone at the same time (press and hold the two keys at the same time), the screen lights up and releases the button to enter.

3: Select Chinese Simplified Chinese and confirm, in the recovery interface Volume key means selection Power key means confirmation, we use the volume key to select the second, [Clear Data], press the power button to confirm the entry, and then use the volume key to select the above three empty options, this is the three clear, press the power key to confirm, clear in turn.

4: After the three clearances, return to the main interface of recovery, select the installation to the system and confirm, select the confirmation and wait for completion, and select to restart the system.

You can refer to this line brush tutorial to flash the phone, you need to unlock the phone first.

Don't make a mistake with the flashing package,Back up your phone before flashing,If you can't get it,You can go to Xiaomi's after-sales point to flash the machine,Flashing there is free。

3: Please make sure that the battery of the mobile phone is more than half of the battery before flashing, this is very important;

4: In the process of system upgrade, do not operate or press which key to press;

5: Do not deduct the battery during the flashing process;

6: Ordinary data cable can also be flashed, provided that your data cable transmission is stable;

7: Back up your personal address book and other information before swiping;

9: Turn off the firewall and security software on your computer.

10: If it is a whole machine upgrade, please back up the files stored in the internal memory card of the mobile phone first, and be sure to remove the SIM card and T card.

Question: I don't have a computer.

1. There are two ways to use the mobile phone, one is to enter the fastboot mode to connect to the computer, and the other is to enter the REC card swipe mode. Therefore, it is possible to flash the computer without a computer.

Second, to be able to use the external SD card, the ROM is placed in the root directory of the SD card, and at the same time there must be read and write permissions.

3. After entering the REC, perform double clearing first, and then perform the swiping from the SD card.

Fourth, the details are as follows.

1. Press and hold the volume up button + power on button in the shutdown state to enter the recovery interface.

2. Perform the double clearing operation (volume button selection, power button confirmation).

wipedata/factory reset---yes---delete all user cache partition---yes---wipe cache.

3. After the execution, return to the main interface of recovery, select install zip from sdcard by volume button, then select choose zip from sdcard, find the rom flash package in zip format put in the root directory of the sd card, press the volume button to select, press the power button to confirm, then press the volume key to select yes-install, and the electrogen key to confirm the flash.

4. After completion, select the volume button, confirm the power button, execute reboot system now, and the phone will automatically restart.

Precautions: 1. The power is above 50% before flashing, 2. Take out the SIM card.

One: Preparation before Xiaomi Max flashes recovery:

1: Make sure your phone is unlocked, it's simple.

2: The driver of the mobile phone needs to be installed on the computer, which is very simple.

3:**Recovery toolkit,Click here**,Follow WeChat on your phone***"Yizhi mushroom (romzhushou)" or scan the bottom of the article***Follow and reply "151155" to get the decompression password (friendly reminder: the reply content must be right)**Down and put it on the computer.

Two: Xiaomi Max starts to flash the operation of recovery:

1: The phone first enters the fastboot interface: first turn off the mobile phone, and press and hold the volume down button of the mobile phone when the mobile phone is turned off.

And. Don't put the power button (that is, the power button) until the Mi Rabbit interface appears, which is the fastboot interface.

2: Then unzip the recovery toolkit on the computer, unzip out a folder, and then find it in the folder [one-click to flash the file directly double-click to open and run, and then press enter directly, and the software will automatically flash into the recovery.

How to flash Xiaomi mobile phones?

[Flashing Tutorial] (Xiaomi Max needs to unlock the flashing lock, so please unlock it before flashing.) ）

Introduce two methods (the number of card swiping packages is generally large, the selectivity is also more, and it is easier to operate than the line swiping package).

1) One-click flashing.

Use flashing software to flash the machine with one click, such as Qitu flashing, it is very simple, pay attention to the backup.

2) Card swiping. Brush in according to the regular card swiping process, pay attention to brush the third-party REC, double clear before flashing into the package, keep the battery power above 50%, and available memory!

The swiping steps are as follows:

Step 1: Import third-party recovery (if you want to flash third-party ROM, third-party recovery is indispensable; If you have already flashed the third-party recovery before, you don't need to flash it again).

Step 2: Swipe the third-party ROM package (card swiping).

2.Enter Recovery mode.

In the shutdown state, press and hold the volume up + power on button to turn on, and press and hold the two buttons until you enter recovery;

In the boot state, select "Restart", press and hold the volume button to enter recovery mode;

3.Wipe Data Factory Reset (Wipe out all data) (the volume button controls up and down, and the power button is OK, the same below).

4. yes

5.Wipe cache partition

6. yes

7.Install Zip from SDCARD

8.Choose Zip from SDCARD

9.Find the installation package and open it.

10 Finally, choose to restart the phone, congratulations on the successful flashing! (It takes a long time to start the first time after flashing, please be patient).

Flash software, there are resources on the third floor.

Flashing method of line brush 1: miflash flashing tool:

3.First turn off the computer, press and hold the power button and the volume down button, enter the fastboo mode button, enter the flash mode and insert the data cable to start flashing.

Brush method 2: Brush treasure tool flash:

2.Open the automatic installation of the Wire Brush Treasure Brush Tool and Brush Driver.

3.Click on the key method that will prompt you to enter the flash mode when the flash package is resolved and wait for the completion of the flashing mode,,Xiaomi's is generally to press and hold the volume down button + power button to enter fastboot mode,4.Connect to the computer and it will automatically flash the machine,Generally, 5 minutes of successful flashing will automatically turn on,Note:

Because it will be cleared after flashing, it is good to back up important data before flashing and restore the backup after flashing.

What is the purpose of flashing? Different purpose, different way of flashing.