How to make the irons on new clothes stick stronger

1.Remove the white substrate with a grain under the hot diamond pattern, and then place the sticker with the diamond pattern on the clothes where you think it is appropriate, and flatten it with your hands so that the sticker with the diamond pattern sticks to the clothes. [Sticky side down].

2.The electric iron is adjusted to the first gear of "cotton" [equivalent to 150 degrees], and the steam iron should not turn on the steam or do not release water, just dry ironing. Place the garment on a flat surface, and sometimes you can put one or two layers of towels on the surface for a firmer ironing.

Press the iron the ironing chart, ironing for about 13 seconds, if the ironing chart is large, the electric iron can not be covered at one time, so repeatedly move the iron on the ironing chart to make the entire ironing evenly heated. At the same time, the ironing time is also extended accordingly.

3.After ironing, wait for the hot drawing to cool down and then remove the layer of sticky paper on the surface, and a beautiful hot drawing is completed.

Note: Because most irons have steam, there are small holes under the iron that affect the heating, so move the iron back and forth when ironing to make the heating even. In this way, the hot stamping will be firm.

Your pants may not be produced at the temperature or for a short period of time, or they may be due to the quality of the hot drill (which is unlikely).

It's best to reinforce it when you buy it and use a high-temperature iron to blanch it again It's good that the hot drill is glued and melts at a high temperature of more than 170 degrees I do it like this.

If there are a few pieces, buy some all-purpose adhesive sticky.

If you buy a hot diamond, you won't lose the diamond. Why buy such bad pants when you have hot and firm pants, and make yourself so troublesome.

Summary. 1.Hot Drill:

The back of the drill has a "sticky gum" substance, which is firmly glued with an iron. 2.Seam drill:

There are holes in the back of the drill, like buttons, that are sewn into the garment with thread. 3.Hand drill inserts:

Many drills are sewn together, connected into a piece, forming a pattern, such as small flower drills, small animal drills, etc., and there are two styles on the back, 1) one is softer, sewn on the garment by hand, or sewing machine on the garment. 2) The other is harder, with glue on the back, which is ironed and glued to the garment. 4。

Computer drill pad: The drill piece from the computer plate. There are also two styles, which can be ironed and glued to the garment, or sewn onto the garment.

How do you get a diamond chain on clothes? Is it sewn on, ironed, or glued?

1.Hot drill: There is a "sticky gum" on the back of the drill, which is firmly glued with an iron.

2.Sewing drill: There are holes in the back of the drill, like buttons, that are sewn into the garment with thread.

3.Handmade drill piece: many drills are sewn together, connected into a piece of wisdom, and the imitation is formed into a pattern, such as a small flower drill, a small animal drill, etc., and there are two styles on the back, 1) one is softer, hand-sewn on the garment, or with a sewing machine on the front large garment.

2) The other is harder, with glue on the back, which is ironed and glued to the garment. 4。Computerized drill blades:

The drill piece from the computer arrangement. There are also two styles, which can be ironed and glued to the garment, or sewn onto the garment.

The above 4 types can be used to get the diamond chain on clothes, I hope it can help you.

There are several ways to remove the glue:

1. Apply with face oil, wipe evenly, first pick off the glue with your nails, and then wipe it with a wet towel;

2. Use a hair dryer to blow out, or use a lighter to bake, and the glue can be easily brushed off after it is hot;

3. Wipe it with wind oil, and the glue will automatically fall off after a while;

4. Erase with an eraser. At the beginning, it will get dirtier and dirtier, but after wiping for a long time, you can see the effect;

5. Soak it in water, put a little dish soap, and then brush it off with a toothbrush;

6. Dip a cloth in some alcohol or a second pot head, and then wipe it gently.

There are several ways to remove the glue:

1. Apply with face oil, wipe evenly, first pick off the glue with your nails, and then wipe it with a wet towel;

2. Use a hair dryer to blow out, or use a lighter to bake, and the glue can be easily brushed off after it is hot;

3. Wipe it with wind oil, and the glue will automatically fall off after a while;

4. Erase with an eraser. At the beginning, it will get dirtier and dirtier, but after wiping for a long time, you can see the effect;

5. Soak it in water, put a little dish soap, and then brush it off with a toothbrush;

6. Dip a cloth in some alcohol or a second pot head, and then wipe it gently.

Summary. Hot drill: There is a "sticky gum" on the back of the drill, which is firmly glued with an iron.

Sewing drill: There are holes in the back of the drill, like buttons, that are sewn into the garment with thread.

How do you get a diamond chain on clothes? Is it sewn on, ironed, or glued?

Hot Diamond: There is a "sticky gum" on the back of the drill, which is firmly glued with an iron. 2.Sewing drill: There are holes in the back of the drill, like buttons, and they are sewn on the clothes.

There will be both cases, depending on whether you sew it or glue it.

Summary. There are three kinds of processes for drilling on clothes (there must be artwork, and the artwork is marked accurately by the designer, which is the diameter of the drill, what color is it, and what position is it), and then it is operated by manual workers as follows

1.Hot drill: There is a "sticky gum" on the back of the drill, which is firmly glued with an iron.

2.Sewing drill: There are holes in the back of the drill, like buttons, that are sewn into the garment with thread.

3.Handmade drill piece: many drills are sewn together, connected into a piece, forming a pattern, such as small flower drills, small animal drills, etc., there are two styles on the back, 1) one is softer, hand-sewn on the garment, or sewing machine on the garment.

2) The other is harder, with glue on the back, which is ironed and glued to the garment.

4.Computer drill pad: The drill piece from the computer plate. There are also two styles, which can be ironed and glued to the garment, or sewn onto the garment.

A: Be sure to pay attention to manual scalding and sticking; The drill to be hot must be placed flat on the platen, the platen has a platform plate, there is also an arc plate, the main force should be even, and the heating should be even. The temperature test is accurate.

B: There are two kinds of manual sewing and drilling processes

1.Semi-finished sewing drills, to make an embroidery shelf, the two ends of the cloth fixed on two bamboo stalks. Bamboo poles should also be fixed.

In this way, the position of the sewing drill can be accurate, and the fabric will be flat.

2.For finished seam drilling, it is necessary to pay attention to the appropriate tightness of the thread.

How do you get a diamond chain on clothes? Is it sewn on, ironed, or glued?

There are three kinds of processes for doing drills on Weikai clothes (there must be artwork, and the artwork is accurately marked by the designer, which is how large the diameter of the drill, what color is it, and what position is it), and then the manual workers operate as follows: 1Hot Drill:

The back of the drill has a "sticky gum" substance, which is firmly glued with an iron. 2.Seam drill:

There are holes in the back of the drill, like buttons, that are sewn into the garment with thread. 3.Hand drill inserts:

Many drills are sewn together, and the fingers are called into a piece to form a pattern, such as small flower drills, small animal drills, etc., and there are two styles on the back, 1) One is softer, hand-sewn on the garment, or sewn on the garment with a sewing machine. 2) The other is harder, with glue on the back, which is ironed and glued to the garment. 4.

Computer drill pad: The drill piece from the computer plate. There are also two styles, which can be ironed and glued to the garment, or sewn onto the garment.

A: Be sure to pay attention to the sticky and rotten state of manual ironing; The drill to be hot must be placed flat on the platen, the platen has a platform plate, there is also an arc plate, the main force should be even, and the heating should be even. The temperature test is accurate.

B: There are two kinds of manual sewing techniques: 1

Semi-finished sewing drills, to make an embroidery shelf, the two ends of the cloth fixed on two bamboo stalks. Bamboo poles should also be fixed. In this way, the position of the sewing drill can be accurate, and the fabric will be flat.

2.For finished seam drilling, it is necessary to pay attention to the appropriate tightness of the thread.

I'm asking about the drill chain, not the loose drill.

It is the use of a glue that melts and bonds at high temperatures.

When washing hot clothes, you must pay attention to them, and you can't rub them hard. If it is easy to fall off when you wear it, it is that the drill is not ironed firmly when making clothes, and you can only glue the fallen drill yourself.