How to move the text in CAD, how to move the position of the text on the CAD dimension

After selecting the Chinese character, you can use the move command, and the specific operation steps are as follows:

Materials required: computer, CAD2007

1. Enter the text command shortcut key in the state of English input method.

dt] and press enter.

2. Specify the starting point, height, and rotation angle according to the prompts, and if there is no requirement for height and angle, then press enter after specifying the starting point.

3. Then enter the text content, and press [Enter] to end the text input command after the input is completed.

4. Then hold down the left mouse button and select the target text to the left border.

5. After selection, enter the shortcut command [M] to move and press Enter.

6. After specifying two base points according to the prompts, you can complete the movement of the text.

1. Use the command, select the CAD text, enter the command M, press Enter, select the base point of the Chinese character movement, move the text to the specified place and click the mouse.

2. Select the file that needs to be moved, point the blue grip to red, and drag it to the specified position.

CAD software has the function of moving,Take Haochen CAD Picture King PC version as an example,After opening the drawing, select "Mode"Click the left mouse button to select the text you want to move,Press and hold the left mouse button to move,As shown in the following figure::

Don't bother clicking on the text you draw, there is a drag dot and that dot can be moved freely.

Click on the text, and when the pickup point appears, click on the dot in the upper left corner to move it freely.

Selected, four dots appear around it, select the one in the upper left corner to move directly!

Click Move to operate.

1. Double-click the CAD shortcut icon on the desktop to open the CAD software and enter the CAD operation interface.

2. After opening the software, use the "Arc" tool to draw an arc in the drawing area, and then mark the arc above.

3. After drawing the arc, find the "Annotation" option at the top, click the left mouse button to open it, and find the "Arc Length" option in its submenu.

4. Click the "Arc Length" option to mark the arc length. The command bar prompts us to "select an arc segment" and move the mouse cursor to the arc.

5. After clicking the arc with the left mouse button, move the mouse cursor to prompt "Specify the arc length label position".

6. After finding the appropriate arc length annotation position boundary, click the left mouse button to confirm, and the arc length annotation operation is completed.

7. Find that the text position in the annotation is in the annotation arc**, if you need to adjust the text position, such as adjusting the text to the above the arc. First of all, click the label to select the object, and if the ant line as shown in the figure appears, the object selection is successful.

8. After selecting the object, right-click the mouse, find the "Label Text Position" in the pop-up menu bar, click it, and find the "On Dimension Line" option in its submenu.

9. Click the "On the Dimension Line" option, and the operation of adjusting the position of the dimension text is completed. When we find our callout text, we move above the callout line.

Solution: 1. Font style setting conflict, for example, the CAD installed on your computer and the design unit must have a standard font, if the design institute sets the font width to be doubled, and yours is 1 times (that is, the default setting, not changed), then the above situation will occur, the solution is to compare the font settings of the original design institute.

2. The text box alignment style is not right, or the font settings mentioned above are related, just change the alignment of the text box, center, right, left, etc.

If you copy the text directly from the design institute, without dumping the low version or exploding it, it will be much easier, otherwise you will need to adjust it line by line.

3. If the CAD version or other software is different from the design unit, you can contact the design unit and ask the design unit about the software used by the design unit. This means that the font in the file is not available in your computer, and you need to find a suitable font file to replace it.

You can use the **CAD font library on the Internet, when the dialog box appears when you open the file in the future, you can find the font file with the same name in the font library Song Hail Da, copy it to the fonts in the CAD program installation directory (other operations), and then close the CAD program, when you double-click the file again, the system will automatically load the corresponding font file to open the file.

1. What about the difference between the modifications of two DXF documents?For the comparison, modification and viewing of DXF documents, we also need to use relevant CAD editing tools to achieve it.

2. For the viewing and operation of CAD documents, we can use the CAD tool as shown in the figure to achieve it, after opening the corresponding DXF document, you can draw the shape of the tools in the list of diagrams.

3. If you want to realize the comparison operation of the content of two DXF documents, we can switch to the "Advanced" selection and judgment card, and use the "File Comparison" to work on the actual operation.

<>5. When the comparison parameters of the two DXF documents to be compared are set, the effect can be seen, and the parameter color can be distinguished.

6. When comparing the difference between the two documents, we can also modify the contrast view style, and at the same time modify the background color. So as to solve the problem of automatic position movement of the reputation.

Choose Chinese characters and change "Chongyu rent to correct the scattered omen" to "align".

1. The icon to move is in the toolbar on the right, and the arrows in four directions are the move ** mark, click to start the operation.

2. First of all, you need to select the moving object, that is, the circle.

3. After the object selection is completed, you need to right-click to exit the object selection operation and proceed to the next operation.

4. The operation of movement needs to determine the base point of the movement, and the position of this base point can be chosen at will, because the position of the final circle can be determined by two base points.

5. The following figure is the position of the circle after moving, and the original circle will be deleted, which is the main difference between moving and copying.

6. Turn on the orthogonal function in the CAD in the above operation, and after turning it off, you can move the circle 360 degrees.

1. Method 1

1. The position of the original graphics and text.

2. Click the text to make the text selected.

3. Press and hold the text with the mouse, drag it to the desired position, and release the mouse.

The effect after moving.

2. Method 21, the position of the original graphics and text.

3. Click on the text you want to move, if you need to move more than one, you can choose from multiple options. When the selection is complete, press "Enter" or click "Right-click".

4. Click on the object you selected, move the mouse to the location of the joint and click the left button. The effect after moving.

m to move, you can also select Chinese characters to use grip points to move.

mMovecoCopying is also possible.

It was the font that was replaced.

If a font used in a drawing is not available on the current system, the font is automatically replaced by another font.

The program deals with fonts that are not currently available on the system by replacing them.

There are three ways to replace a font: specify a replacement font, font mapping, and **font.

First of all, make sure that the fonts in your CAD installation directory and the fonts in the windows directory are the same as everyone else's.

1》fontalt system variable changed to.

2》Find and delete all the contents in your computer.

CAD supports two fonts:

One is a TrueType font, with the suffix TTF, which is stored in the font folder of Windows, and this font is solid and takes up space for gorgeous display.

One is the font developed by CAD itself, called the font, with the suffix SHX, which is stored in the fonts folder under the CAD installation directory, and this font is hollow and simple to display.

If you use a truetype font, you can support Chinese characters, and if you use a type font (shx), you need to use a large font to support Chinese characters. When you open the file and can't find the large font you need, the Chinese character will display "? ”

Large fonts are a special form of type font (shx) that is designed to support the Asian alphabet.

Asian alphabet in large font.

Japanese vertical font (some characters will be rotated so that they display correctly in vertical text).

Japanese font, a subset of characters.

Chinese Traditional Chinese font.

Japanese Extended Fonts, Level 1

Japanese Extended Fonts, Level 2

Chinese Simplified Chinese font.

Korean font.

Korean font.

Korean font.

Korean font.

I recommend you to take a look at the book "The Secret of AutoCAD Masters Don't Ask for People", which is in the form of questions and answers, for specific questions, it can be used in an emergency, not a tutorial, for people who have worked, excellent Amazon, Dangdang.com, and Jingdong have it.

Are you working inside the layout?

Or are you not checking them all?

1.Open the CAD software, in the left column is the drawing toolbar, find the rectangle paint command pattern, click on the pattern to draw a rectangle.

2.Find the "Dimension" option in the menu bar, click Dimension Options, the drop-down menu pops up, find the "Dimension Style" option in the drop-down menu, and click this option.

3.The "Dimension Style Manager" dialog box pops up, find the word "Style" in the left column of the dialog box, select the style you want to change, such as "ISO-25", select it, and then click the "Modify" button on the right.

4.There is a row of toggle buttons at the bottom of the "Modify Dimension Style: ISO-25", find the word "Text", and click the word "Text".

5.There is a "Text Position" in the page of the text typeface, a "Vertical" word below the text position, and a drop-down triangle next to it, click the drop-down triangle to select "Center", and then click "OK" in the lower right corner. This is the way to set up.

6.Then enter the "DLI" command in CAD, press the enter key to execute the command, or follow step 2, find "Linear" in the drop-down menu, and then annotate the drawn rectangle, you will see that the annotated text is centered, as shown in the following figure:

Select the dimension of the callout, a blue grip will appear there in the text, click the grip to move the text position.

You can click on the number and move the text when you see a blue dot.

There is a manual adjustment of the text position in the annotation settings, just check it.

One way to do this is to use annotated text to move the text position.