How do I create a block !?? in CAD

Blocks can be created with the w command in CAD in the following steps:

1. Open the CAD document, then enter the letter "W" in the keyboard, and press the spacebar to confirm (or enter "W" in the command bar below and press Enter):

2. Next, the window of the writing block will open, and then click the "Select Object" option in the page

3. Next, you will enter the object selection page, at this time, use the mouse to select the shape that needs to be created into a block, and press the enter key:

4. Then return to the page where you created the block, select "Convert to block", then select the path to save, then enter the name of the block, and click "OK", so that you can create the block

1.Select the Drawing-Block-Create menu to open the Block Definition dialog box.

2.Enter a name for the block in the Name box.

3.Click Pick Point in the Base Point settings area, and then pick the intersection of the centerline as the insertion base point in the drawing area, or enter the coordinates of the point directly in the dialog box.

4. Click "Object Selection" in the "Object" setting area, then select the entire drawing in the drawing area, and press enter to return to the "Block Definition" dialog box.

There are also three radio buttons in the Object settings area, which function as follows:

Preserve: You can keep the original image after defining the block.

Convert to Block: Converts the original object to a block after defining the block.

Delete: Deletes the original object after the block is defined.

5.In the settings area, you can set the units for blocks in the "Fast Units" drop-down menu. In general, it's better not to specify units for blocks (i.e., select "No Units" in the "Fast Units" drop-down menu) to make this easier.

6.In the Description menu box, enter some text description about the block.

7.Click OK to complete the definition of the block.

Once the block definition is complete, the next step is to insert the block.

Click Insert Block in the Drawing toolbar and enter insert on the command line.

Tip: You can also execute the insert command by pressing Enter the shortcut command i on the command line.

The DesignCenter layout allows you to use blocks defined in other drawings.

To get the contents in a block, you can start the explode command to explode the block.

I know all this, I hope it helps you.

Select the graphic you want to create, click the Create Block button on the left toolbar, and save as a name. dwg will do.

Use the shortcut command to create blocks with "b" and insert blocks with "i". After the command is entered, you look at the command line at the bottom to complete the operation.

First, start the CAD software, then enter the command shortcut key: B, click the Enter key to confirm, and the [Block Definition] dialog box will be brought up.

In the Block Definition dialog box, type a name for the block, click Pick Point, and specify the insertion point of the block in the sheet.

Click Select Objects to select the block objects in the drawing.

After completing the object selection, click the Enter key to jump back to the [Block Definition] dialog box, you can see the block preview after the CAD block name, and finally click [OK] to complete the block creation.

You can change it, there are three ways to form a block, one is to insert (i), the second is to write the block (b), and the third is to write to the hard disk (w).

The CAD backbone of the block can directly take the mouse of the CD a little, and then pull it to be directly fast.

I've also encountered this problem, and now I'm always creating blocks, as long as the graph, the numbers are re-entered, have you found a good way now?

Hehe, send a picture.

It depends on what block you're using.

What effect to achieve.

Material Tools: CAD

1. Open the CAD software and select the layer you want to build a block.

2. Enter the shortcut command bl, and a dialog box will pop up.

3. Enter the name you want to give to the block, and it will be easy to find later.

4. Click to select the object and select the graphic you want to build a block.

5. Then right-click.

6. Click directly to confirm, if the name is entered and the name of the other block is the same, there will be a prompt, return to modify the name again.

7. Double-click the block you created, and then click OK, you can directly modify your block.

1. Enter the command block, spacebar, select the object to be formed into a block, and then enter the name (the name can be arbitrary), and the base point can be specified or not;

2. Ctrl+C (or Ctrl+X) select the object to form a block, and then Ctrl+Shift+V click on the blank space to get a block (the name of this kind of block starts with a$c).

Enter b (block) on the command line, and a dialog box will pop up, just enter a name. This is the basic operation, if you want to be clear, you can familiarize yourself with the functions in the operation box one by one.

1. Open a file and determine the object you want to create a block.

2. Click the "Drawing"-"Block"-"Create" command to pop up the block definition dialog box.

3. In the block definition dialog box, enter "Name", which can be customized, click "Pick Point" to specify the insertion point of the block.

4. Click the "Select Object Button", go back to the image file and select the object you want to set into blocks, then press the spacebar to return to the block definition dialog box, and click OK to finish.

5. Click the "Insert Block" button to pop up a dialog box, click OK to insert a tile anywhere on the screen.

6. If you want to rotate the object, you can check the "Rotate on the screen" button to select any angle.

It's not as complicated as it says upstairs.

Save the block you want to insert anywhere on the hard disk.

In the file where you want to insert a block, click Insert - Block (shortcut key i) - Select the location where you just stored the block you want to insert As long as you use it for the first time, it will default to the last open position in the future.

NoteThe origin of the save block is the insertion point.

There are two ways to create blocks in CAD. 1. Enter b

The block definition dialog box pops up.

Enter a name and select Convert into a block, such a block can only be used for the current drawing 2 input w

The Write Block dialog box pops up.

Such blocks can be stored under the path of your choice.

You can insert it at any time if you want to use it later.

I guess you use it"Create a block"The problem with this tool's created blocks is that the blocks it creates can be used in the current file.

You're going to create it with a writing block"Shortcut key W"

Open the Write Block dialog box, select the object in the source, the pick point means that when you insert the block, take that coordinate as the base point, you can click the icon in front of the pick point to pick it up in the drawing space, and select the icon in front of the object to select the object you want to create a block in the drawing space. The last thing is to choose a path and a name to save it. ok

When we create a new document, we can call it, insert a block on the point drawing toolbar, point name - browse, find the path and name of the block you created above, the insertion point can be selected to specify, scale 1, OK.

Select the part you want to play fast, press the fast command (I have to be b) to name the block, and you're done.

Shortcut b Click on the selection object below the object (it is a small box with a red cross in it), click and select the shape you want to select in the CAD window, then click the space to confirm, and then click the pick point below the base point. Select the point you want to select in the CAD window and use it to position it when you propose a block in the future. Then the low-energy space confirmation is complete.

This block should only exist in the file you are working on. There are no other new cultural buildings. If you use it often, it is recommended that you save it as a template.

After building the extraction, the point I extraction block can be done. If you need to decompose, put the decomposition in the lower left corner with a checkmark.

What I said upstairs is only to define the block (shortcut key "b"), and the defined block can only be applied in the current drawing, but it is not a long-term solution to solve the urgent need, if you close the file and reopen a new image, you can't insert the originally defined block, if you want to use that block, you have to redefine it.

Therefore, you should use "write block" (shortcut key "w"), in fact, the operation of "write block" and "block definition" is similar (pay attention to the positioning of the base point, generally select a certain point on the block, anyway, the selected base point should be conducive to the insertion and positioning of the block). The "Write Block" operation can save the block you have defined to the folder you specify by browsing, so in the future work, if necessary, you can use the browse option in the "Insert Block" to select the block you need...

1. Select all objects.

2. Ctrl+X space.

3，ctrl+shift+v

4. Done.

Select - b - Space - Name - OK.

First draw the figure to be built into a block, enter b enter, open the block building dialog box, 1Enter the block name, 2Click the Select Object button and select the object you want to build a block, 3

Click the Pick Point button, specify the insertion point of the block, don't worry about anything else, just OK. Enter i enter to insert the block you just created.

Enter b with the shortcut key, press enter or space, select the object, select the image you want to define as a block, and fill in the name of the block and click "OK".

b command (block) to create an internal block, specifying a block name, which can be called within the graph.

wb command (wblock), create an external block, specify the block name and save it as a dwg file, which can be called in different files or opened separately.

If you want to change some of the parameters, you can define the properties.

Enter the command block and select the pattern you want to make into blocks, and then select the base point when you are sure. That's it!

1. There is a Create Block command in the drawing toolbar, click to create (you need to select the design block diagram, base point unit, etc.), and the block creation command does not have a save path.

2. The shortcut key w space is also a block creation command, which can customize the save path The method is the same as that if you want to insert it later, you can select the path of the inserted block.

Shortcut key b

Click on the selection object below the object (it is a small box with a red cross in it), click and select the shape you want to select in the CAD window, then click the space to confirm, and then click the pick point below the base point. Select the point you want to select in the CAD window and use it to position it when you propose a block in the future. Then the low-energy space confirmation is complete.

This block should only exist in the file you are working on. There are no other new cultural buildings. If you use it often, it is recommended that you save it as a template.

At the time of the completion of the construction of the extraction point i

Extract the block and you're good to go.

If you need to decompose, put the decomposition in the lower left corner with a checkmark.

There are two ways to create blocks in CAD. 1. Enter b

The block definition dialog box pops up.

Enter a name and select Convert into a block, such a block can only be used for the current drawing 2 input w

The Write Block dialog box pops up.

Such blocks can be stored under the path of your choice.

You can insert it at any time if you want to use it later.

Shortcut: block

CAD how to create blocks.

Start by drawing a rectangle.

CAD how to create blocks.

Enter the Create Block command, select a name, and select an object.

CAD how to create blocks.

After clicking [Select Object], click the rectangle you just drew and press Enter.

CAD how to create blocks.

You can see that [1 object] has been selected, and then click OK, and the block will be saved.

Note: This method of creating blocks can only be called in the current document, and should be used in all files, which will be described below.

CAD how to create blocks.

You can use block to create blocks in the drawing, use wblock to create block files and save them, and then use them to insert them into the desired drawing later.

Select the shape you want, then click Convert to Block in the left toolbar.

1.First of all, make sure that you want to save the disk as a quick drawing.

2.Use the w (block save) command to save the diagram to your own dedicated folder for block files.

3.When you need to call in a block file, use the i (insert) command to enter the folder where you stored the block file, and click on the file you need.

Select the shape you want to create a block of, press "b" (shortcut), press enter, and set it inside.

wblock, which writes various blocks to a single directory.

The specific operation steps to make an existing drawing frame into a block in CAD are as follows:

1. First create the information text of "Attribute Definition" (shortcut key att), the corresponding font size and content, and click OK. The CAD model will appear.

2. Double-click the font in the CAD model, and the following frame will appear. The following frame appears to indicate that you are doing the right thing.

3. Next, the information that you need to modify frequently in the frame will be in the corresponding frame position in the form of "attribute definition" according to the above way.

4. Execute "Block Definition" (shortcut key B), click "Pick Point" is normally at the most edge corner of the graph, and click the OK key. Then click "Select Object" to select the entire frame. Enter the name of the frame in the Name field. Click OK.

5. The operation of building blocks has been completed here.