What should I do if the hand cranked Panpan drying rack will automatically slide down after it is ra

The hand-cranked Panpan drying rack will automatically slide down after shaking, mainly because the small support piece of the spicy wheel in the shaker handle cannot support the gear of the spicy wheel, and it reverses and slides down, or the gear is worn out and causes the phenomenon of self-locking failure and declines. This situation can also occur in other brands of hand-cranked products.

You can call Panpan drying rack national free service**800-716-6600 and ask if there is a local business that can come to repair. The product warranty of the hand series is two years, so that the master who understands the machine repair can come to see if he can use other materials to make a small support and repair, if the gear mill is damaged, then he can only wait for the maintenance personnel of Panpan Company to replace it.

If you want to use it urgently, you can use a rope to tie the rocker handle, so that the drying rack does not slide temporarily, but you must pay attention to the safety must be tied solidly, otherwise there will be a safety accident due to the slide.

Hello, the gear in the hand crank of your drying rack is broken, you take it to the local place where the drying rack is sold, see if someone can repair it for you, it can generally be repaired and the fee is about 20 yuan, if you can't find the repair, you can buy a good hand crank, the good wife brand is good, it is universal. I'm from Yantai, and we're in charge of hand crank maintenance, which is too far!

How can you buy a Panpan drying rack, that brand quality department. I advise you to go to the market and buy a hand crank to replace it, and then buy a lesson.

Panpan drying rack hand-cranked series products are guaranteed for two years, and the gear is broken, resulting in self-locking failure. This is an unavoidable phenomenon of any brand of hand-cranked products.

You can call Panpan drying rack national free service**800-716-6600 and ask if there is a local business that can come to repair.

In this way, contact the purchase office as soon as possible to arrange maintenance, and the warranty period is within two years, which can be guaranteed free of charge. And the problem hand crank is inspected by the repairer, and it can generally be repaired and used normally.

zhe You have to go to their ** business Generally, it is a one-year warranty, and lifelong maintenance and maintenance are charged

Top hanger hangs.

Hello dear and happy to answer for you. The reason and solution for the automatic falling of the automatic drying rack are: the hand-cranked drying rack falls down by itself, and the steel wire cannot be locked If the drying rack shows this fault phenomenon, then the hanger may fall by itself by its own weight, generally because the steel bowl is out of place, and the coil spring inside fails, and the rotating parts cannot be locked.

The repair method is also simpler than grinding Zheng, as long as the cavity is opened, one end of the spring is hooked to the protrusion in the steel bowl, after re-winding, it is loaded into the steel bowl, the other end of the spring is hooked into the seat column, and the spring steel bowl quietly inserts the positioning foot into the corresponding bayonet and presses, and then winds the steel wire to the axle and loads it with an appropriate amount, and finally installs the blind song bottom plate on Oh kiss. The above is all the answer, I hope the answer can help you, I wish you a happy life.

The drying rack generally needs to be maintained once in about two years, because the hanger is easily affected by rain and humid air and sunlight in the air and rusts, so the wire rope will be broken, or the blank will be raised, etc., the hand crank will slip (can not be locked), and the hand crank may not move.

There are generally two situations in which the drying rack lifter fails:

1. The steel wire can't be locked, and the hanger falls by its own weight, generally because the steel bowl is out of place, and the coil spring inside is overheated, and the rotating parts cannot be locked or the gear crack inside the gear can not be fixed and the grinding disc is slipping.

2. The resistance is generally the steel wire when it is shaken or shaken, because its inner cavity is small, the steel wire is opened after the steel wire is messy, and the steel bowl contacts to produce resistance, at this time, as long as the steel wire is slowly dissolved (when retreating, the other hand pulls the wire rope outward).

If it is stuck and cannot be shaken, it is necessary to report for repair in time and do not use it, so as to avoid using improper wire rope to fall off the drying rod and hurt people.

How to buy a balcony drying rack?

1. Look at the drying rod material: At present, there are stainless steel, aluminum-magnesium alloy, silicon-magnesium-titanium aluminum alloy on the market, consumers should distinguish the material, one is to pay attention to the description of the business, choose a reputable business operator, the other is to directly force the two ends of the lever, aluminum alloy tends to bend, can not be reduced, titanium alloy will not.

2. Look at the thickness of the drying rod: The thicker the better, but the moderate. Poles that are too thick to shake too heavy are not suitable for lifting. The thickness of the pole should be moderate, and the thickness will be more suitable.

3. Look at the hand crank: The hand crank is the core component of the drying rack, which is very critical. The quality of the lifting drying rack pulley directly affects the lifting of the drying rack.

A good pulley must have the characteristics of flexible universal rotation, no noise, abrasion resistance and anti-release groove setting. The lower-grade hand crank on the market is dominated by the gear device, and the higher-grade hand crank adopts the integrated spring lock process.

4. Look at the wire rope: The wire rope is very important, one looks at the thickness, and the other looks at the flexibility. The thicker and softer the wire rope, the better, identification method: fold the wire rope in half, and let go to see if it can be restored.

If the Panpan drying rack is high and low, then you only need to adjust the pulley of the Panpan drying rack, and you can adjust the two sides of the Panpan drying rack to the same height.

The failure cause of the clothes rod is high and low on the other side 1, the wire rope jumps;2. Poor assembly (normally, the wire rope at the end of the upper travel switch should be short).

The failure cause of the clothes rod is high and low on the other side 1, the wire rope jumps;2. Poor assembly (normally, the wire rope at the end of the upper travel switch should be short).

Treatment: 1. Install the wire rope at the pulley position of the plate, and re-snap into the pulley groove;2. The wire rope on the motor jumps the job, and all the wire ropes need to be withdrawn to reload3. If the wire rope is too long, withdraw all the wire ropes to cut off the long end. If it still doesn't work, it is recommended to use a flash dryer.

The balance is adjusted through the knots of the wire.