How to install and set up TPLink wireless router

The LAN port of the cat pulls a network cable to the WAN port of the wireless router, the specific method:

1. Connected by network cable or wireless connection, we enter the address in the address bar, and the general initial address is;

2. Enter the username and password in the pop-up dialog box; The initial password and user name are generally admin, and the specific ones can be viewed on the router; Generally on the back of the router;

3. Enter the router and select the setup wizard; Click on the next Internet access method, we select PPPoE (ADSL Virtual Dialing).

4. Below we enter the broadband password; If your home is a monthly subscription, you can enter it; If it's not a monthly subscription, you'll have to think about it; After entering the password; In the future, after your computer is turned on, it will automatically dial up to access the Internet. This means that you don't have to manually connect to broadband every time. If you don't want to automatically dial up the Internet, you can leave it out here;

5. The first two of the following are set to the signal name of the wireless router, which can not be changed; The second is the wireless router key; It is advisable to change it;

6. The first two of the following are set to the signal name of the wireless router, which does not matter and can not be changed; The second is the wireless router key; It is advisable to change it;

Please turn left, forget it or I'll help you.

The installation and setup of the TPLink wireless router is as follows:

1.First connect the line, you can refer to the figure below.

3.Once you've logged in to your backend, select Quick Settings and click Next4Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the account and password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

1. First of all, it is natural to install a wireless router, the installation process of the wireless router should be very simple, we only need to use a network cable to combine the wireless router with the modem, there are many interfaces of the wireless router, don't connect to the wrong place, and the interface of the modem is generally different from other colors, generally blue, and there should be a WAN style logo.

2. Then there is the most important setting process, before setting, we also need to prepare a network cable to connect the computer and the wireless router in order to enter the wireless router interface for configuration, if you do not use a wired connection, the router address can not be displayed correctly in the computer.

3. Then we enter the address of the router, the address of the router is generally written in the manual, the address of the router of different brands may be different, and the address of the router of different models of the same brand is not the same, but most of them are the router addresses that we often use, for example, such an address, and then we enter the username and password and click OK to enter, the default username and password are admin.

4. Then we click on the setup wizard to configure the basic parameters of our Internet access. By default, there are three ways to access the Internet: PPPoE, dynamic IP, and static IP. If you don't know how you access the Internet, you can choose to let the router automatically choose the Internet access method.

5. Then enter the basic network parameters provided by the network service provider, the connection mode is static IP, so the required is static IP and subnet mask, other optional, the configuration of other Internet access methods may be slightly different, if you forget, you can call ** consult the network service provider, let them tell you, after completing the input, we click Next, and then we came to the wireless setting interface.

6. First of all, we need to fill in the SSID, that is, the wireless network identification, which is the medium for us to connect to the wireless Internet, so we must remember the SSID we fill in. Then it's to fill in the wireless password, in order to prevent rubbing the network, the wireless password is generally set, if you don't turn on the wireless security, you can not fill it in, of course, it is still highly recommended to turn on the wireless security.

7. Then we click Done to complete the setup of the wizard. Under normal circumstances, you can use wired or wireless to access the Internet normally, of course, if there is a situation that you can't access the Internet normally, we can click on the network parameters, WAN port settings, and confirm whether the WAN port connection type and dial mode are set correctly.

Ask if this wire is plugged in correctly.

1. The broadband cable is connected to the router [WAN port], the color of the WAN port is generally different from the LAN port, and the computer is connected to any port of 1 2 3 4.

2. After connecting the line, plug in the power supply, check and confirm that the corresponding interface indicator is always on or flashing.

Two. Set up your router.

1. Set the operating computer to [Automatically obtain IP address]. If the computer has not set it, the IP address of the computer is automatically obtained by default.

2. In the browser on the desktop of the computer, clear the address bar and enter the router management IP address (alternatively, the login box pops up after enter.

3. When you enter the router management interface for the first time, you need to set the password (username: admin, password: admin) to manage the router.

4After entering the management interface of the router, click [Setup Wizard], and then click [Next].

5. Select PPPoE (ADSL Virtual Dialing) as the Internet access method, and click [Next].

6. Fill in the [Broadband Account] and [Password] provided by the operator in the corresponding setting box.

7. Set the SSID as the wireless network name, select WPA-PSK WPA2-PSK and set [PSK Wireless Password], click [Next].

8. Click [Finish] to complete the setup wizard.

Please shoot the interface clearly.

That's right.

It's normal for the lights to be on.

After the power is turned on, connect the wireless router to the computer, open the browser and enter in the address bar: to enter the settings interface of the wireless router. According to the setup wizard step by step, select the Internet access method, and restart the wireless router after the setup is completed.

Next, go to the wireless settings and set the SSID name

The LAN port network cable of the cat is connected to the WAN port network cable of the router, and then plug a network cable into the LAN port of the router to link the computer Open the browser, enter the set administrator password in the address bar, and select the next step to enter the broadband account password The next step is to set the wifi password Done.

The computer network cable is connected to the LAN port and the browser address is entered.

Taking TPLink WR886N as an example, here's how:

1. Open the browser, enter the IP address, default, Enter;

2. Enter the router password and click OK. (Blank by default) 3. Automatically start the connection wizard and click Next;

4. Select the connection mode that conforms to the actual situation, in this case, the PPPOE dialing mode is selected;

5. Enter the account password provided by the broadband operator and click Next.

6. You can modify the wireless SSID name, it is recommended to select WPA-PSK WPA2-PSK encryption, set the password, and click Next;

7. Click Done.

Let's read the manual first! If you don't understand, ask again.

The manual is carefully prepared by the manufacturer, the content and steps are detailed, please respect the fruits of people's labor.

Hello, here's a ** tutorial, it's very clear.

After the power is turned on, the network cable will connect the wireless router with the electric rental pure brain, open the browser and enter in the address bar: enter the settings interface of the wireless router. According to the setup wizard step by step, select the Internet access party and restart the wireless router after the setting is completed.

Next, go to the wireless settings and set the SSID name

Required tool material: TP-Link wireless router.

The method is as follows: 1. One end of the network cable is connected to the WAN port of the router, and the other end is connected to the LAN port of the cat;

2. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box) and answer empty;

3. Click Next;

4. Select PPPOE (ADSL Virtual Dialing) in the Internet mode, and click Next;

5. Enter the broadband account provided by the broadband operator in the Internet access account, and enter the broadband password in the Internet password;

6. Set the wireless network name in the SSID, select the WPA-PSK WPA2-PSK encryption method, and set the wireless password of no less than 8 digits in the PSK password;

7. Click Restart, and the router is set successfully.