What to do with the slurry of stone floor tiles facing the sky 20

If it's a single piece of slurry, you can remove the floor tiles and do it again with Dasha cement. But it has to be professional.

Glue treatment, then beauty sewing treatment.

Stone glue and grout agent are used indoors, and cement is used outdoors to strengthen early.

If you pour slurry, "the material is clear, and it dries slowly", and it is not good to put on the stone. "Leveling" waste time when pasting.

Liduo Meixing cement

This seam is called an expansion joint! It is mainly to prevent or try to avoid the cracks of the ceiling or partition wall after completion. The specific process is not to be explained!

It is easy to fill in the caulking plaster to avoid cracking later.

Cracking will not be noticed.

The original floor or wall surface is uneven. Originally, stone is easy to break, especially natural stone, and the master of installation will break it if he is not careful.

The thickness of the ground and stepping stone should be more than 3 cm, and the mortar layer should not be too thin when paving.

Many families do not have much experience at the beginning of the renovation, so after the renovation is completed, they find that their house has a variety of decoration problems. In fact, at this time, we must use some methods to solve themFor example, when there is a gap between the stone on the wall and the stone on the ground, some methods can be used to solve it.

In fact, most of this is due to the lack of experience of the decoration personnel, so there is a deviation when the line is laid out on site or when the size is deepened, so that there is a relatively large gap between the stone of the building wall and the ground. In fact, at this time, you can ask the original renovation team to come back for rework and find a way to repair it.

After all, if the gap is relatively large, it will affect your experience in the subsequent use process, because there are some gaps with relatively large gaps that are easy to retain dust and other items in the home, so it is necessary to solve it in time. But if the gap is not particularly large and you can use some methods to solve it, then you can choose to buy some items at home that can be covered.

For example, placing some green plants at the junction of the wall and the ground can play a good role in shielding, so that other people will not be able to detect the cracks between the walls when they look from the outside. In addition to this one option, you can also buy some materials to simply fill in these gaps. However, the best thing to do is to have the original construction team rework.

You can put some home or something to block it, or put a pot of flowers or something.

We can put a cabinet in this position to block it, or put a pot of plants, which is a good way.

If it's small, you can block it with something, and if it's bigger, you need to ask the original construction unit to fill it.

It would be a hassle if we redecorate, we could buy something that could be covered and put there.

Buy some shaded corners to get on, so you can cover them, and it will look better.

Find some similar materials and fill them in, or you can put plants in front of you.

The easiest way to do this is to buy some decorations and put them there to cover up, for example, flowers.

I have been doing this industry for many years, kitchen and bathroom tiles remember to face the sky seam, so the sky seam is to first pave the wall tiles to the original ground, and then pave the floor tiles, this laying method does not conform to architecture, the first wall tile surface is smooth, and the joints of the floor tiles, due to, vibration, temperature difference, and dry humidity, there will be gaps, and the water will flow into the sand layer under the floor tiles along the gaps when bathing, and there will be problems after a long time of accumulation. 1. Because there is sand and gravel on the ground when the mason master lays bricks, long-term construction will damage the waterproof protective layer, and there is a possibility of seeping downstairs. 2 It will also penetrate into the surrounding walls.

Look at the exterior wall of your bathroom, there are shells, mold, and peeling, indicating that there is something wrong with your bathroom. The advantage of wall tiles and floor tiles is that when the wall tiles are laid, the soft cement mortar will naturally sag in the knocking of the workers, and the contact surface with the floor tiles is dense and seamless, which is equivalent to making a secondary waterproof for the bathroom.

The oldest and most formal method is to press the floor tiles on the last row of wall tiles, but now there are basically no workers to do this, they are all pasted wall tiles and then pasted floor tiles, from the rules there is nothing wrong, it does not affect the use, but it does not conform to the tradition.

I think you can, the advantage of this is that there is less waste of bricks, in fact, it is okay, but if the wall is tiled, you need to cut it may cost extra money, and if the floor tiles are cut and attached to the wall, it is recommended that you use cement for treatment, and it is easy to have problems after using cement directly.

How could there be such a strange question? When laying bricks, they are all paved with floor tiles first, and then paved with wall tiles, since the floor tiles are paved first, of course, the ground is covered, it is impossible to leave a gap and wait for the wall tiles to stick to the gap, so how to ensure smoothness? Of course, the wall tiles are pressed on the floor tiles.

Yes, the crevices of the kitchen and bathroom are easy to breed bacteria.

It seems that it is a problem of construction design, and it should be a roof cover or a water draper. If the gap is small, for the sake of beauty, it can only be glued. If the gap is too large and cannot be seen on the ground, fill it with foaming agent and then seal it with waterproof cement.

If it is a gap between the horizontal and vertical plates, then follow the wall practice of foam rod and weathering glue to plug it.