How to solve the phenomenon of high voltage deflection of ink accumulation in inkjet printer

Check whether the ink line of the machine is in the normal working range, refer to the manual adjustment, and the debugging of the ink line will be on the general manual.

In the detection pole position to see whether the shape of the ink dot is regular, you can refer to the ** on the manual for comparison. If you don't regularly debug according to the guidance of the manual, it's OK, different machine manuals have different names for the adjustment keys of the components, and you can do it yourself according to the instructions.

The high pressure should not be adjusted too high, as long as it does not affect the printing effect, it can be appropriately lowered. The nozzle cap should usually not be opened, it should be closed, as the ink dots are small and easily affected by outside air (wind).

If you find that the ink has accumulated and rinse it with a cleaning agent, otherwise it will increase more and more until the printing effect is printed.

The breakpoint is not good, the ink is not too good, and the ink line position is not appropriate, which may cause high-pressure ink accumulation.

The high pressure is too high, the annual is too high, the ink line is biased, the ground line is biased, and the pressure is too small.

It would be good to set the character height of the print information parameter to a little smaller, and it would be fine after an hour of normal operation.

The viscosity control technology of the domestic machine is immature, and the ink manufacturing process is immature, you can only see if you can solve it by changing the ink or let the machine run for a few more hours and then print.

First, the nozzle is slightly blocked, and then it may be caused by the instability of the ink viscosity, you can consult the maintenance engineer of Shanghai Yinma Company.

The high-pressure plate ink first depends on the position of the ink line, whether it is too high. Then check whether the ink is contaminated, and if the ink is expired or used for too long, replace it with a new ink. Then see whether the grounding of the sprinkler head is reliable.

Check to see if the nozzle is clogged. There may also be a problem with high pressure, the probability is relatively small, and the others cannot be thought of.

You knockoffs dare to come out and see Dominoes and Videojet fishing catch them!!

What brand? If you are in Zhejiang, I can help you.

The circuit board leaks high voltage, so it is a problem with the motherboard, and it is recommended to replace it.

Whether the ink is original or not.

In this case, there is ink or other sundries on the deflection plate, and the deflection plate needs to be cleaned after the ink line is opened, and the ink line is used after the cleaning solution is dry. Be careful not to wash directly before opening the ink line.

First of all, you have to check if the high pressure is normal.

From your description, the ink line cannot be broken into ink dots but shoots out in a straight line, most likely due to damage to the crystal oscillator.

There is also a possibility that there is a problem at the nozzle, check whether the lower nozzle is plugged or damaged.

If this is ruled out, then you should consider contacting the seller and replacing the motherboard, power supply and other parts.

It may be that there is a problem with the high-voltage power supply or the power supply of the inkjet printer is faulty, you can check it.

The ink line should be adjusted, this phenomenon is caused by the ink line deviating from the ** tube, and the ink is sprayed on the deflection plate, so it will be a high-pressure failure.

Different inkjet printers have different causes of viscosity problems, and the solutions are different, and the common viscosity faults generally have the following reasons for reference: the viscometer is blocked, resulting in viscosity failure caused by the inability to detect viscosity; The second point is that the ink viscosity is too high or too low, which leads to the machine alarm viscosity failure, and the third point, the viscosity solenoid valve cannot work normally, resulting in abnormal viscosity detection. Fourth, the viscosity of some models is related to the cleanliness of the nozzle sheet, and the viscosity failure caused by the nozzle sheet being too dirty; The main difference between the fourth case and the first three is the difference in the way the machine itself detects viscosity. We specialize in making inkjet printer equipment in Shaanxi, and hope to help you.

Disassembling the vacuum generator is the last resort, you can first try to fill the ear wash ball with thinner and connect it to the **device to clean** the pipeline, (but wash the inside of the pipeline) but don't dilute the ink!

Willy's 37e, such a machine is already an antique, there is no maintenance value, the cost of later maintenance will be higher and higher, it is recommended to replace it directly! ～

You clean the vacuum generator or make the real air conditioner larger. **The device is not blocked, it must be that the vacuum is not enough. I guess it's the vacuum generator that has a micro-blockage. In the future, you will need to clean the vacuum generator frequently. ** The tube is better to wash it down as well.

You can find a manufacturer to repair it

Wash the ** tank. Or not**. I don't know what machine you have. Find their manufacturer.

When you stop using it, you don't turn off the power directly after turning off the machine according to the regulations, wash it with cleaning liquid, and then turn off the power after the display screen is completely extinguished when you turn it off next time. Clean the ** tank in time.