How to remove the fold marks on the fabric of the down jacket

Your fabric is generally not silk, it is generally made of polyester fabric, and I have not encountered a down jacket made of silk fabric for more than ten years. There should be a wash logo or fabric composition on the side seams on the inside.

If there are water stains, you can use a towel to stick some water, rub hard in the place where the water stains are made, and use non-crumb toilet paper to suck the water around when you rub it out, until you can't see the water on the edge, and then quickly dry it with a hair dryer, and the watermark will disappear.

First you need to make sure that the fabric is made of polyester or nylon, or polyester and nylon.

1. Suspension method.

Ironing is a better way, if you don't master the ironing process well. Soften the cortex with lanolin and hang it for a few days, softening the cortex with lanolin will speed up the automatic relaxation of folds, and it will also have the desired effect. But if the leather has lost its elasticity due to aging, don't iron it lightly.

2. Ironing method.

Ironing temperature control is the key, the temperature is not enough to play a role, the temperature is too high is easy to damage the leather surface, serious damage to the skin, or even complete damage. However, leather ironing is not an advanced technique, as long as the temperature, pressure and time are mastered.

The leather surface is paved with a piece of glossy kraft paper, and the ironing bag is padded below (you can't use a soft bag), adjust the temperature to about 75 degrees (that is, the low temperature position of the iron standard, and the water droplets will not evaporate quickly), first blanch it in the fold to see (you can't add water, you should pay attention to the pressure and time, and the pressure is shorter), and trim the temperature, pressure and time according to the situation, until it is suitable to iron the surface that needs to be ironed. When ironing to the suture line or hem, after lifting the iron, use a cotton ball to pressurize and dissipate the suture or hem, because the suture or hem of the leather garment is glued with glue, do not make the glue invalid because of ironing. After ironing, the leather garment should be cared for with lanolin, just follow the instructions.

Summary. 1. Wipe it with a paper towel dipped in some alcohol (it is best to use industrial alcohol, or make do with medical treatment), and then rub it a few times to be clean. 2. Use acetone.

Same method as above. The amount is small and thorough, and the best thing is that it removes these residual gums very quickly and easily, which is better than sprinkling sperm. 3. Use hand cream.

Tear off the printed product on the surface first, then squeeze some hand cream on it, and slowly rub it with your thumb, and rub it for a while to rub off all the sticky residues. Just slow down. Hand cream is made of grease substances, and its properties are incompatible with gums.

This is the use of this property for glue removal.

1. Wipe it with a paper towel dipped in some alcohol (it is best to use industrial alcohol, or if you don't use medical treatment, you can also make do with it), and then rub it a few times to be clean. 2. Use acetone. Same method as above.

The amount is small and thorough, and the best thing is that it removes these residual gums very quickly and easily, which is better than sprinkling sperm. 3. Use hand cream. First tear off the surface of the printed annihilation product, then squeeze some hand cream on it, and slowly rub the core hunger with your thumb, and you can rub off all the sticky residue after rubbing it for a while.

Just slow down. Hand cream is made of grease substances, and its properties are incompatible with gums. This is the use of this property for glue removal.

I'm still a little confused, can you be more detailed?

1. Pour the first oil on the place with offset printing. 2. Wipe the place with nail polish remover with seafarer manuscript sedan cotton. You can easily smile and wipe off any remaining offset prints.

3. Pour the alcohol over the place with the offset print. 4. Wipe the place where the alcohol is wiped with a sponge, and you can easily wipe off the residual offset print.

Generally, the pattern printed on the down jacket cannot be removed. Because the pigments are deep into the bottom of the cloth, they are still pressed at high temperatures.

If it is not pressed, or if his paint is not good, it will fall off after washing it a few times, or it can be knocked off with a water gun. However, be careful when playing water guns, as you will accidentally break the fabric.

If the patterns printed on the down jacket are all acrylic paint, there are also those hand-painted clothes sold on the market. Then you can buy a preparation to remove acrylic paint, called banana water, and use this.

If the pattern printed on the down jacket is a glue print, it is pressed at high temperature, the stickiness is very good, and it is not easy to get off. You can try to use organic solvents such as gasoline, alcohol, etc. If it is small, you can use butyl ester, and then strengthen the laundry spray gun, which can be removed.

It is generally not recommended to remove it, as it will easily damage the clothes and clothes.

Kiss The offset printing on the down jacket can be removed with wind oil essence, because the wind oil essence contains alcohol in it, which can dissolve offset printing. Spare ingredients: a basin of water, wind oil essence, cotton swabs.

First, use the dry cleaning method and pour the wheel dismantling oil essence on the place where the glue is stained on the clothes. After dripping with wind oil essence, let it sit for five minutes to allow wind oil essence to penetrate into the glue stain. After about ten minutes, you will notice that the glue has softened.

Use a cotton swab or toothbrush to slowly remove the glue that softens the hail, gently follow the lines of the clothes with a cotton swab, and peel off the glue little by little, the process must not be in a hurry, otherwise it is easy to hurt the clothes. Slowly the glue was rubbed off. When the glue comes off completely, wash it off with clean water, and the glue is completely gone after washing.

Summary. The words of the down jacket hot stamping can be removed, but it cannot be removed by washing, you can consult a professional hot stamping shop for processing, and the laundry needs to check the washing label of the clothes, whether it needs to be cleaned on the reverse side, whether it can be vigorously rubbed and other precautions. It is difficult to rinse the down jacket thoroughly due to the large water absorption, so it can be rinsed once and dehydrated once to avoid the watermark after drying due to the residue of washing liquid.

After the down jacket is dehydrated, it should be dried as soon as possible, and it can be dried on the reverse side in a cool and ventilated place or dried with a tumble dryer.

The words of the down jacket hot stamping can be removed, but it cannot be removed by washing, you can consult a professional hot stamping shop for processing, and the laundry needs to check the washing label of the clothes, whether it needs to be cleaned on the reverse side, whether it can be vigorously rubbed and other precautions. It is difficult to rinse the down jacket thoroughly due to the large amount of water absorption, so it can be rinsed once and removed from the water once to avoid the watermark after drying due to the residue of the washing liquid. After the down jacket is dehydrated, it should be dried as soon as possible, and it can be dried on the reverse side in a cool and ventilated place or dried with a tumble dryer.

The above is the answer to your question, if you have any other questions, I am always available to answer them

Thermal transfer printing is fine.

Down jackets are made of polyester fabric.

Thermal transfer printing is enough, that is, the pattern is printed on the paper first, and then the paper is pasted on the polyester cloth.

It is transferred to about 180 degrees of pressure, and it is very convenient to use water in the whole process. Down jackets generally can't be graffiti, because of the relationship between the fabrics, the down jackets are all down-proof fabrics, and the fabrics are generally smooth fabrics.

It's more beautiful than your own graffiti, if you have to paint it, you can mix it yourself and spray it yourself, and it's good to spray the model in advance. Make a pattern of your favorite pattern, then find a favorite color and paint it. There is no need to scribble all kinds of stickers for sale, and there is no way to clean it if it doesn't look good.

How to print the pattern on the down jacket:

Thermal transfer: Printing the pattern onto heat transfer paper using thermal transfer ink and screen printing, and then transferring the pattern to clothing with a hot stamping machine (a more popular method nowadays).

Hand painted, buy acrylic dyes.

I go to a T-shirt by oneself.

It is painted on it, and it may fade after a long time. To buy a heat transfer machine, you need professional heat transfer ink, printer, and transfer paper. 3D printing T-shirt refers to the 3D effect of the pattern, and then through the sublimation digital printing transfer to the T-shirt, the 3D T-shirt itself is flat, through the principle of 3D technology to form a 3D visual effect.

Digital printing is a new technology, mainly including eye-punching, splicing, stringing, and peritoneum.

Cutting and other processes. It has the advantages of non-fading, breathable, odorless and non-toxic.

Hello dear! How to get scratches on the fabric of the down jacket: First find out the scratches on the down jacket, and keep the clothes dry for dry cleaning, because if it is wet with water, it may not be so obvious.

2. Pour wind oil essence or flower water on the traces of clothes, and each scratch should be evenly covered with wind oil essence or flower water, because flower water, wind oil essence contains alcohol, a large amount of ethanol hall combustion, butylene glycol, propylene glycol, these are organic solvents. 3. You can also try to use toothpaste to infiltrate pants, which contains a small amount of silica, and the particles are small enough to polish and polish many objects, such as mirrors, and you don't have to worry about even scratches, because it is very subtle, and the toothpaste can also remove scratches on the surface of the mobile phone.

1. If the glue print on the down jacket is erased off with an eraser, there is still a mark on the clothes. There are two ways to remove offset printing. Nail polish remover and alcohol can be used to remove any remaining offset marks from clothing.

2. Pour the nail polish polish on the place with offset printing, and use a sponge to wipe the field with nail polish remover, and you can easily wipe off the residual offset print. 3...

1.The tape print on the down jacket can generally be washed off as long as you put a little vinegar and use a little force when washing!

If you still can't wash it off, then wash it with gasoline or fragrant water used to dilute the paint, which is generally sold in places where paint is sold, and it is very cheap!

2 .Put the clothes in the refrigerator, let the gel on them, and rub them off.

Here's how:

1. If it is all-purpose glue, you can use acetone or banana water to drop on the glue stain, brush it repeatedly with a brush, and then rinse it with water after the glue stain becomes soft and takes off from the fabric.

2. If it is chewing gum, first use raw egg white to remove the viscose on the surface of the clothing, then wipe off the loose residual particles one by one, and finally put it in soap to wash, and finally rinse it with water. If it is a fabric that cannot be washed, it can be applied with carbon tetrachloride to remove any residual dirt.

Extended Materials. A down coat is a top filled with down filling, which has a large and rounded shape. Down jackets generally account for more than half of the amount of duck down, and at the same time, some fine feathers can be mixed with the duck down, the duck down is cleaned, sterilized at high temperature, and then filled in the clothes is the down jacket.

Down jackets have the best warmth. It is mostly worn by people in cold regions, and is also commonly used by polar expeditions.

Here are a few ways to introduce you to the use of your look.

1. Use oil painting brush wash (turpentine).

Wipe off the glue with a paper towel dipped in some pen wash liquid, which can be purchased at an art supply store.

2. During the pasting process of transparent tape, the binding water in the middle of the tape is lost, and the bonding is tight.

We can use the new tape to stick the old tape, or we can just use gasoline and banana water.

3. If the area is not large, you can consider using eraser.

4. If you have expired hand care products at home, apply it to the glue to remove the traces.

5. Use soap and a little ammonia and turpentine to remove the glue on the transparent tape.

6. Wipe it off with a little sodium water, or use paint thinner to remove the glue on the scotch tape.

7. You can use a hair dryer to dry, blow the glue soft, and then gently scrape it 8. Wipe it with a cotton swab dipped in some nail polish remover.

9. Wipe with wind oil essence.

10. Use a special detergent or sneaker detergent to wipe it.