How to recover the trip light of a smart meter when it is on?

1. Check whether the remaining amount of the smart meter is zero or reaches the set lower limit, if the remaining amount of the smart meter is zero or has reached the set lower limit, the power supply may be cut off for the user, and the trip indicator will be always on.

Solution: In this case, please purchase electricity in time, when the purchased electricity fee is issued to the smart meter, try to close the switch, and there is also a watt-hour meter.

It can be self-transmitted;

2. If the remaining amount of the meter is greater than zero, the trip indicator is still on, and the switch is still closed after tripping, please do not deal with it without authorization.

The yellow light of the meter tripping first checks whether it is in arrears, and then finds someone from the property or power company to repair it, and then closes it after the repair is completed.

1. Check whether the balance of your home meter is insufficient, if so, you can charge the money.

2. The balance in the meter is sufficient, and the yellow light cannot be restored manually, so don't deal with this matter yourself.

3. Call ** to the property and let the property personnel come up for maintenance.

4. If the property cannot be repaired successfully, call the power company to let them repair it.

5. After the maintenance is completed, close the electric switch and return to normal.

Precautions. If the meter fails, it is generally due to the leakage or short circuit of the electrical appliances or circuits at home, unplug all the plugs, wait for professionals to overhaul them, and do not move them by themselves.

I used to deal with it myself because the meter was also on yellow, and as a result, the meter that I had used for four or five years in front of me was broken, so I bought a new meter on the Internet, and this time I bought a plug-in card meter, <>

Before I bought it, I also learned about the meter brand and the quality on the Internet, and then I chose the meter of Minrong, I saw their articles about the meter** Ah, they are not bad, and then I bought this meter on their official website, and I will also show you their official website by the way, you can also go and see it if you want to change it yourself. Hope it helps!

1.Check if the remaining amount of the smart meter is zero or has reached a set threshold, and if so, you need to purchase electricity.

2.If the amount is greater than zero, the trip indicator is still on, and the switch still can't be closed after tripping, please do not handle it without authorization.

3.At this time, you need to contact the property electrician to troubleshoot the short fault point in the city, or call the electricity service **95598 for help.

1. The reset button of the smart meter is on the side of the switch, which is a small square button with different colors, such as black or white. We can press it first, and then push it up, and basically we can reset it successfully.

2. However, sometimes it is easy to have the problem of not being able to push up, mainly because the leakage protector is installed at home, so we also need to press the button of the leakage protector first, and then push the main gate up to be able to reset successfully.

Smart Meter Features:

1. There is no need for manual meter reading, which is conducive to modern management. The use of IC card meters avoids many inconveniences caused by manual meter reading and door-to-door charging, and the historical power purchase data can be saved for customers to query.

2. It fully reflects the commodity attributes of electricity. The implementation of buying electricity first and then using electricity allows customers to purchase and use electricity in a planned manner according to their actual needs, and will not incur late fees due to arrears and increase unnecessary expenses.

3. It solves the problem of difficult charging. It can well solve the charging problems of scattered residential customers, temporary electricity customers, and customers who are often in arrears.

How to restore the trip light of infrared smart meter when the trip light of infrared smart meter is on? As long as his infrared line is adjusted to be good recovery.

Press and hold the white reset button in the lower right corner of the meter for 5 seconds, and it will automatically recover.

1. If the electricity bill has been paid, and make sure that the meter has been received, then see if the empty open has jumped, and then send it again.

2. Usually there is a small hole in the lower right corner of the front panel of the meter, use chopsticks to reach into the small hole and hold the reset button for 5 seconds, the indicator light of the trip does not flash, and the pulse light is on, that is, the power transmission is resumed.

After recharging, if the balance is greater than 0, press and hold the white button for 3 seconds to restore the power supply.

You can only ask the power station to restore it for you, or you can consult 95598 to help you notify the power supply.

After the smart meter trips, it needs to be re-closed to turn on the power.

The tripper of the smart meter is usually installed in the electric box next to the meter, and the switch status on the outside of the electric box can be checked to determine whether it is tripped. If the trip is in the off state, it needs to be set to the ON state.

If the meter trips and is found to trip again after reclosing, it may be caused by the excessive load of the macro ruler, at this time, it is necessary to check the load and reduce the load appropriately to avoid circuit overload. Excessive load may be due to too many appliances working at the same time, or the power of some appliances is too high.

A line, or an electrical appliance, will leak electricity due to the increase in voltage. During this time, you unplug all the appliances, turn off the switches if they are not plugged, and try to check them overnight if they don't jump. If there is still no power after the meter is tripped and re-closed, you need to confirm whether the surrounding wires and cables are faulty, or notify the management department to check whether the power supply is normal.

How smart meters work

The basic principle of smart meters is to rely on AD converters or metering chips to collect the user's current and voltage in real time, analyze and process them through the CPU, realize the calculation of forward and reverse, peak-to-valley or four-quadrant electric energy, and further output the electricity and other content through communication and display.

Inductive meters are mainly composed of aluminum discs, current and voltage coils, permanent magnets and other components, and their working principle is mainly measured by the interaction between the current coil and the eddy current induced in the movable lead disk.

The electronic smart meter is mainly composed of electronic components, and its working principle is to first use the user's real-time sampling of the power supply voltage and current, and then use the special electric energy meter integrated circuit to process the sampling voltage and current signal, and convert it into a pulse trapped Zen punch output proportional to the electric energy, and finally process and control the pulse as the power consumption and output through the single-chip microcomputer.