How about the Inphic network set top box, the Inphic set top box can t find a wireless network

Infic's set-top box is not bad, but it uses too many things built into Ali's system.

Yes, but the best thing is LETV box, Tmall box, Taijie box, good hardware configuration, strong decoding ability, the key is good post-service, otherwise it is difficult to solve problems such as upgrades in the future. It is recommended to purchase the latest version.

Hello,Dear,Recommended use,If you want to ****, it is recommended that you use TV cat software,TV cat** resources are particularly rich,The latest blockbusters、Classic film and television、Variety shows、Sports programs, etc.,You want to see it here,Of course, TV cat**also**TV live broadcast、Playback,Particularly smooth。 Hope.

I have this at home, I installed it last month, and I'm very satisfied.

Hello, if there is a quality problem, you can call the consumer complaint **5 to complain.

Hello, not yet!

I have this at home, I installed it last month, and I'm very satisfied.

The set-top box ——— or ——— the TV ——— the TV remote control conversion or setting - wireless setting - finding the hotspot - entering the password.

Hello, not yet!

Possible causes and solutions of network signal: 1. The wireless wifi of the wireless router is not turned on. Workaround:

Turn on the wifi signal of the wireless router and use other devices to check whether it is normal. 2. The wireless router is broken. Workaround:

Replace it with a new wireless router. 3. The Inphic network set-top box is not equipped with a wireless network card. Workaround:

You need to buy a wireless network card to access the network set-top box, and then connect wirelessly. 4. The wireless function of the set-top box is not turned on and is still in the OFF state. Workaround:

Go to the set-top box menu, find the network settings in the system settings, and change the wireless to the network set-top box is too far away from the wireless router (the wireless signal is very weak), resulting in the set-top box not being searched. Workaround: Move the wireless router a little closer to the set-top box.

To eliminate the problem of wireless signal, I have tried to find customer service to flash the tutorial if it cannot be solved in the machine software settings (including factory reset).

Summary. Dear, hello, I'm glad to answer your questions, what to do if the Infic network set-top box can't connect to the network, A: First, connect the network cable from the router to the network port of the back panel of the set-top box, open the network settings of the set-top box, and automatically obtain the IP address, and successfully connect to the network.

2. If the set-top box has a wireless network card, you can set up a wireless network, the specific steps are as follows: 1) Press the "Menu" button of the remote control of the set-top box to find the "Settings" option; 2) Find "Wi-Fi" in the settings menu and tap to enter it. 3) Click the "Turn off and on" button in the upper right corner of the Wi-Fi Settings page, and click to turn on [Wi-Fi]. 4) Click to open, a lot of wireless network names will appear on the [WLAN Settings] setting page, find your wireless network and click to enter; 5) Enter the password of the wireless router, the general wireless password is 8 digits, if you don't know, according to the ** provided behind the wireless router, log in to set up, you can open the wireless network, so that the set-top box is connected to the wireless network.

Dear, hello, I am happy to answer your questions, what to do if the Inphic network set-top box is connected to the network without blocking the Li method, A: First, the network cable drawn out from the router is connected to the network port of the back plate of the set-top box, open the network settings of the set-top box, and the IP address will be automatically obtained, and it will be successfully connected to the network. 2. If the set-top box has a wireless network card, you can set up a wireless network, and the specific steps are as follows:

1) Press the "Menu" button of the remote control of the set-top box and find the "Settings" option; 2) Find "Wi-Fi" in the settings menu and tap to enter it. 3) Click the "Turn off and on" button in the upper right corner of the Wi-Fi Settings page, and click to turn on [Wi-Fi]. 4) Click to open, and a lot of wireless network names will appear on the [WLAN Settings] settings page, find your own wireless network and click to enter; 5) Enter the password of the wireless router, the general wireless password is 8 digits, if you don't know, according to the ** provided behind the wireless router, log in to set up, that is, the dry mu can open the wireless network, so that the set-top box is connected to the wireless network.

The router has been replaced,Now you have to set up Infic's TV network set-top box connection network,How to turn on the remote controlwifiEnter the password。

First of all, connect the power supply, and turn on the switch of the Zheng coarse top box of the brigade beam, as well as the TV. Find the set-top box remote control, find the settings button and press it, the TV will show that there is wifi, then select wifi and click to confirm to go to. After setting all the options, click on the town to complete the wifi password setting of the TV set-top box.

It's not bad, it's cost-effective, but it's less stable. The main thing is that there is less content in the box,But you can install a TV home browser。 You can find more user reviews on TV.com.