My MM starts very slowly, there is a good TX to tell, how to solve it

monkey159 Slow is slow! What is this? In the city, many people are used to it, but they are not in a hurry! Seriously despise, I'm also a newbie and also encounter such a problem, let him go and ignore it! View the original post

Two days ago, I tried the automatic transmission of the Audi A6 of the LD company, if you don't use T, the start is also very slow, if you use T, it's another matter, and then talk about lz, It's normal to flash the lights, let him flash it, it's his headlights that burn out, and it's not yours, if someone flashes the lights behind you in the future, you put a "practice" sign behind the car, haha today I sent my LD to work on the way to work, I'm also saying, we used to see new cars, new people, new photos, we will also say that people are "novices", bs take a look at their cars, speed, driving skills for a long time, don't care so much, slow down, slow down, not everyone is in a hurry to relax, and the road is wide View the original post

First, the problem of LZ. Eric once said that the fastest way to start is not to accelerate sharply and press the accelerator, but to send the brakes first, and then slowly refuel the car when it moves. Second, let's discuss the issue of starting with several gears.

I used to start with Poussin 5th gear! The car is shaking badly, and it must be oiled, it hurts the car, hehe! View the original post

Then come to the final automatic transmission oil must be even, slow, once the automatic transmission is oiled to the floor, the speed is very high, the speed rises very slowly, probably because the speed is fast, automatic gear change If you want to start fast, under the condition of ensuring safety, loosen the brakes in advance, slow oil, let the speed rise evenly, you can view the original post

I even know that as long as you control the clutch, you can open 3 gears. The van of the even unit was also activated in 4th gear. But there are a few people who are willing to play with their cars like this. View the original post

First of all, open "System Properties" (right-click - Properties on my computer, or open "System" in the control panel, shortcut win+pause break) click the "Advanced" tab, open "Settings" in the "Startup and Failback" area, remove the two in the "System Startup" area, if it is a multi-system user, keep the "Time to display the operating system list". Click "" to make sure that the additional property of the startup item is fastdetect instead of nodetect, and do not add the noguiboot attribute first, because guiboot will be used later.

The next step is very important, open the "Hardware" tab in the "System Properties", open the "Device Manager", "IDE ATA ATAPI Controller", double-click to open the "Secondary IDE Channel" properties, click the "Advanced Settings" tab, change the delivery mode of devices 1 and 2 to DMA if available, select "None" if the device type can be selected, click OK to complete the setting, and set the "Primary IDE Channel" in the same way.

Open the registry (Start-Run-Regedit), click "My Computer" to open "Find" in the "" menu, enter AutoEndTasks, and click "Find Next". Double-click to open the found result, and modify the "Numerical Data" to 1. Then under AutoEndTasks you can find hungapptimeout, waittokillapptimeout, set the "numerical data" to 2000 or less, here by the way, also modify the time of the menu delay, find the menushowdelay below autoendtasks, the value is in milliseconds, if you want to remove the menu delay, set it to 0.

Now that the acceleration of startup and shutdown has been completed, restart the computer to feel the feeling of fast startup, and the scroll bar is OK after only one or two turns.

After enjoying the fun of fast restart, let's further speed up the boot speed, open the "System Properties" - Advanced - "Boot and Failback" settings, open the "System Boot Source" area, and add noguiboot after fastdetect, so that the scroll bar will no longer be displayed at startup. If you really like the display of this scrollbar, you don't need to do this step.

If the startup is slow, it may be that the system is not working. With the Akiba system reloaded, this one is smooth!

First, it is possible that there is a virus in the spike

Second, there are many start-up projects

You can guess how to install a 360 Security Guard.

Scan for viruses and read Huaibu·· General viruses can be removed

In the advanced -- start the project -- the unwanted start project is disabled·· It's faster than that

It's best to scan your computer for malware with 360... Just because a new computer is free of malware doesn't mean it's free...

Delete the junk files on your computer and defragment them. If you can't do it, reinstall the system.

I'm dizzy, my computer is turned on for 10 seconds, turned off for 5 seconds, I don't even know why, hehe

First of all, you have to look at your own configuration, if it's low, don't talk about speed. If the machine configuration is OK, the first thing to see is whether it is the reason for the system, if you don't want to reinstall the system, it is a symptom but not a cure. If the fault is still after the system is installed, you have to see if there is more ash in the machine, whether there is still silica gel on the CPU, and the elimination method.

It's because when you start up the computer. There's too much software to start.。。 You hit msconfig on the run and see if there are any unwanted startup items to unstart them.

Hello landlord, there are several reasons for slow operation: there are viruses, too much system garbage, too many startup items, your machine configuration is low, and the system has not been reinstalled for a long time. Clean up the garbage with 360, antivirus, turn off the startup items, delete the useless icons on the desktop, replace the screen with a blue screen, don't make too much money.

It is a point to be able to save points.

Reinstall the system, and turn off the program uselessly! It's just that you don't start useless programs when you start them! ~

It may be that there are too many junk files in the system, tidy up the system; It is also possible that there is a virus Trojan, anti-virus, and it is also possible that the machine configuration is low, and the response to the program you are running now is a little slow, upgrade the configuration!

There are too many startup processes, just cancel some unwanted processes!

How big is your memory? Is it slow to boot up? Reinstall the lower system.

Try not to set up software that runs with the system startup.

It is estimated that there is a problem with loading the driver, you can try to reinstall the driver.

It could be a memory issue.

It could also be the motherboard.

There may be a problem with the driver being loaded.

Will there be a virus? Use the latest antivirus software to fully kill the virus first.

If it's not a virus, it's a driver's problem.

One possibility is that your computer is infected with a virus, so you need to kill it. Another possibility is that you have launched too many programs. Then you're going to have to reduce your startup project.

The computer is infected with a virus.

Too many programs are launched.

If there are too many files on the system disk, the system disk will be automatically detected when it is turned on.

The hardware configuration of the computer is too low. Wait a minute.

Kill the virus first, then kill the Trojan. (Use the latest version).

It is estimated that it can be solved.

The optimization inside is not done, and there is a virus in your computer, it is recommended that you use optimization software to optimize it first, and try it If it doesn't work, it will be a virus in your computer There is also a possibility that you start a lot of projects randomly You can check off some unnecessary random start items in the startup items

1: XP is generally slower and slower the more you use it, and it can be reinstalled or restored. Make a back copy after loading.

Two: Optimize it with Optimizer or Super Bunny.

Three: Give C disk**, use disk cleanup, or **expert, or XP manager.

Four: If the hard disk is 40G and the memory is 256, do not install a killing software that occupies a large amount of resources, such as Kaspersky.

5. Scan in safe mode to rule out the possibility of poisoning. Check for software conflicts.

Six: Increase the hard disk to 80g, the memory to 512, upgrade the motherboard to the first thing to consider booting and booting, or too much junk on the computer, or the antivirus software point resources are too large.

I will.

It's not in the registry.

Changing it in the registry doesn't have much effect.

Try this method.

Just use it well and give extra points.

Open the "Hardware" tab in "System Properties", open "Device Manager", "IDE ATA ATAPI Controller", double-click to open the "Secondary IDE Channel" properties, click the "Advanced Settings" tab, change the delivery mode of devices 1 and 2 to DMA if available, select "None" if the device type can be selected as "None", click OK to complete the setting, and set the "Primary IDE Channel" in the same way. If you change both of them, the starting bar will only be one or two turns. If you don't get used to it too quickly, you can just change one.

Modify the registry and delete startup entries.