How to block the configuration display when the computer is turned on

Power on and press del to enter the BIOS

1 Select Advanced BIOS Features, find Full Screen Logo Show, set it to Disabied, and press F10 to exit.

2. Select Advanced BIOS Features, find Quick Power on Self Test, set it to Enabled, and press F10 to exit.

That's right. However, some motherboards are different.

Most of them are still set up as described above.

BIOS settings, the information in the first item, find the show logo option, set to enable!

POST information, normal.

What a strange request! There's a show logo option in the BIOS, see? Select Enable, and you're OK.

There are two steps to boot up and press del to enter the BIOS

1 Select Advanced BIOS Features, find Full Screen Logo Show, set it to Disabied, and press F10 to exit.

2. Select Advanced BIOS Features, find Quick Power on Self Test, set it to Enabled, and press F10 to exit.

Here's how to prevent certain programs from starting automatically on your computer.

1. Press and hold the window key on the computer keyboard, then press the X key, and then release it together to bring up the extended settings bar.

2. Click on the Task Manager option.

3. Click on the launch option.

5. Right-click on the program.

6. Click on the Disable option.

7. The operation can be completed, and you can see that the program has been disabled from booting auto-start.

How to set the boot startup items independently, so that your Windows boot speed is no longer slowed down by the software.

In the startup section, select Run, type msconfig In the startup item, select the startup item that you don't need, and you're good to go, and you can remove it by restarting it next time

Let me tell you the easiest way, you won't be able to understand it quickly!

Install 360 Security Guard, click Advanced, click Startup Item Status, tick the point you don't want to boot up, and finally disable the selected item, and it's OK.

Start-> run.

Enter msconfig enter.

Find the startup items, which are full of startup items for booting, and remove the hook in front of the program you don't want to start

A lot of software can be set up.

If you have 360 installed, then use the boot startup in the 360 management application software to prohibit the unwanted ones.

If you don't have a 360, just install one.

There are also optimization masters.

Super bunnies can be set up.

Start --Run --msconfig --Start.

If you don't want to boot up, just go to the hook.

Here's how to prevent your computer from booting up and starting the project program

2. Press the Enter key, click the "Start" column, tick the items that do not need to be started at boot, and click OK.

This phenomenon can not be shielded, is caused by the system automatically detecting the last abnormal shutdown of the system or the abnormal system is caused, if it is shut down normally every time, check whether the power supply is aging and causes the hard disk to lose power prematurely. If you can't find the problem, try reinstalling the system.

This should be caused by a faulty shutdown, choose Normal Boot or Last Correct Configuration, let it automatically turn on and shut down normally.

1. Open the control panel and enter Windows Update;

Click on "Change Settings" in the left rail, and check "Never check for updates".

2. Right-click the desktop computer icon and select "Manage".

Select "Services" in the left column, select Windows Update in the right column, and select Right-click - Properties - Startup Type: Disable.

This problem is easy to solve: In the beginning, there is a windows update in all programs, click on, and there is an option to change the settings in it, and then select it inside.

Disable this updater in the launch.

Right-click on My Computer --Properties--- Auto-Update --- turn off Auto-Update --- OK

Set this group as a regular chat group.

Then carry out the group message blocking that everyone was familiar with before, dangdangdang! The desktop and mobile terminals are now separated!

If the computer is still blocked, just unblock it on the computer again;

The landlord found that the next day, the computer side was actually blocked with the mobile phone side, and the above operation can be blocked separately again!

Turn on and press F2 or press Enter to set it.

If you have a problem with the system, you can choose it by model.

First install the driver, if it doesn't work, open the device manager, and disable the device with question marks and exclamation marks.

If the shell hardware detection of the key process of the system is disabled, it will not be prompted again.

When the computer system boots the priority network card, turn off the priority network card to start as follows:

Take Lenovo BIOS as an example).

1. Press F12 (or another key defined by the computer) to enter the main BIOS interface, and press the right arrow key to switch to the "Device" page, as shown below

2 In the above figure, use the up and down arrow keys to select the "Network Setup" item, press Enter, enter the setting page of the item, and change the setting of "PXE Boot Agent" from "Enable" to "Disable", as shown in the following figure (red box).

3 Then press the F10 key to save the settings and exit the BIOS, the machine will reboot, and the BIOS will no longer boot from the network card.

At this point, the operation of shutting down the BIOS booted from the network card is complete.

When turning on the computer, press F2 repeatedly, and the shortcut buttons of different computers are different (there are ESC, del, etc., query the corresponding instructions of the computer).

Go to the BIOS settings, find the first item, set it to Hard Disk and boot it from the hard disk.

If you find "cd ***", you will boot from the disc.

Modify this tab.

Generally, it can be booted from the hard disk by default.

Go to BIOS, then Integrated Peripherals, find the LAN Boot ROM item, and set it to Disable.

Then go to the Advanced BIOS Features and select the First Boot Device item as Hard Disk.

Or you are in the BIOS, just find the Onboard LAN controller set to disaabled} and turn it off.

Landlord,It's not in this interface.........

Since you all know that it is boot, press the left and right keys to switch to the boot interface, and set the first boot item to hard disk......

You should take a picture of the above section.

Those vulnerability patches haven't been imported into the system yet. If this appears for a long time. There is a problem with the system.

Try it when it turns on. Press and hold F8. Choose. The last time it was configured correctly. Enter. Are you sure.

The computer itself is updating the patch, you don't need to care, you can do it without shutting down, it will automatically shut down after completion, and it will appear when you turn it on again, and you don't need to care, it will automatically enter the desktop after completion!