Modified 09 2 box Focus large wheels flat tires

The manual ones are 15-inch wheels.

It can be changed to 16 inches (205 55) or 17 inches (215 45) The steering and braking have been significantly improved, but at the same time, the road feeling has become stronger, and the tire noise has increased significantly.

The mileage calculation has an impact and can be corrected by the dispatching computer, but the overall change is not significant and negligible.

The difference between the first wheel hub is very large, it all depends on the economic strength, and if you have the conditions, try not to go to the deputy factory, I have taken medicine, and a wheel is deformed in 2 years.

There are many options for 16-inch tires, 17-inch because 45 is already very flat, and I have seen more with Pirelli's SP9000 and Bailuchi.

Overall, 15 liters 17 is feasible, if you are in Shanghai, you can search for Tongfutang, which is a relatively large car club, and there are several designated ** merchants.

I also wanted to modify this before buying the car, so I found a lot of information.

Let's talk about steering first, at the same speed when cornering, the larger the hub has an advantage over the smaller one, because the hub is larger, the tire must be thinner, so that the side twist of the tire will be smaller.

The brakes are definitely better, the wheels are bigger, the width of the tires has increased, and the grip is better.

The mileage calculation is to be affected a little, this does not need to be too careful, even if it is original, the tire grinds badly, it also affects the calculation of the odometer.

As for the top-of-the-line ones, as far as the BBS wheels and horsehead tires are concerned, Mitchlin's tires are not wear-resistant, but they are quieter to drive.

The general wheel hub is about 600-1000, and the imported one is very different, like the regular wheel hub of BBS, which is more than 3000.

Information parameters. I can't help it.

If you have a blue FKS, then it is recommended to buy a yellow wheel. It's so handsome.

FKS original car 15-inch 195 65 tires If the power does not change, upgrade to 17-inch 215 45 tires If you want to change the 18-inch wheels, it will be 225 45 tires The odometer will be slightly affected FKS is very easy to change There are too many accessories Change the wide tires will be better in cornering.

In fact, I think it's enough, the Goodyear tires in the hatchback, the wheels are not ugly, you can use them, but they cost more fuel and can't improve safety.

Call **010-63712539 to find Xiao Zhang, he can give you professional references.

Classic Fox.

It is possible to replace the 18-inch wheels.

Classic Focus cars can choose the size of the wheel, the size and width of the wheel hub is a very important set of data, the larger the size, the thinner the tire should be, because try to keep the circumference of the tire, otherwise the speedometer will be biased. The thinner the tire, the more pronounced it will be on the road.

The wider the wheels of the classic Focus car, the wider the tires that can be installed, although it will improve fuel consumption, but the larger the ground contact area, the more stable the grip, and friends who consider the performance of the car should reasonably replace the wider tires.

Yes, but after the change, the power is obviously insufficient, and the shock absorption is very poor, the ride comfort is very poor, the fuel consumption is still very high, and the only advantage is that it looks good. Most people have changed it to 17 inches, which does not lose ride comfort and looks good, but fuel consumption will still increase.

Focus should be 16-inch wheels before, 215 55 R16, so the diameter of the outer tire, after changing to 18 inches, in order to maintain the same outer diameter, you must choose, the tire with a smaller aspect ratio, 215 50 R17 (the outer tire diameter is 640mm The original high-end version of the Focus is used for this) Therefore, if you go up, you need to change to 215 45 R18 (the diameter is too big, the body rises close to 35mm, it will definitely rub against the car body, especially the steering, and the car body leans forward when braking, or rubs against the car body) Or 225 40 R18 (diameter 630 This is too small, there will be problems with speed indication, and the body will be lowered by more than 30mm), and there is a wider tire, 235 40 R18 (diameter 638mm is the most suitable, but wide tires, which means that it costs fuel to drive, and the start is slower, but the steering and safety performance is better, and the steering will not rub against the car body due to wide tires. ）

Can be changed! But you have to go to a professional place, because you still need to brush the trip computer after changing!

I can change it! Mine is 18, tires 225 40 18

Classic Fu 17-inch comprehensive most perfect ET38 want to align with the side of ET35

Generally speaking, this car goes to the 4S shop to replace ** at about 700 yuan, and goes to the auto parts city or repair shop ** at about 400 yuan:

1. The wheel hub is a barrel-shaped metal part with the inner circumference of the tire supporting the tire and the center is mounted on the shaft. It is also called a rim, a steel rim, a wheel, and a tire bell. There are many kinds of wheels according to different diameters, widths, forming methods, and materials;

2. In the past, the wheel bearings of cars used to use single-row tapered rollers or ball bearings in pairs. With the development of technology, sedans have widely used sedan wheel hub units;

3. The scope of use and usage of the hub bearing unit are growing day by day, and it has developed to the third generation: the first generation is composed of double-row angular contact bearings;

It's okay to have a Focus modified wheel, but here are a few things to keep in mind:

1. Don't try to buy fakes cheaply: the modification of the wheel hub is a more important step in the modification of the car, whether it is the appearance of the modification of the mu rock or the improvement of handling performance, the wheel hub has played an important role in it, a high-quality wheel, after rigorous production technology and strict inspection, to ensure that its personality parameters are qualified. If the economic conditions do not allow for the time being, please be cautious in choosing modified wheels, although the original "steel rim", "cast wheel Xunzhou Yu" may not be beautiful and lightweight, but at least the safety is guaranteed;

2. To choose the right hub correctly: the role of the hub to enhance the appearance is more obvious, but when choosing the hub, every detail must be taken into account, the parameters of the hub will affect the use of the hub and the vehicle, the PCD value is incorrect may not be able to install normally, the ET value not only affects the installation and use, but also may affect the future upgrade and modification;

3. Ensure the correct installation of the hub: the modified hub should pay attention to the size of the diameter of the center hole, if the size is smaller than the original size, it can not be installed, but if it is larger than the original size and no comparative measures are taken, it will cause the vehicle to be discentered when driving, resulting in abnormal noise and shaking of the vehicle, and in serious cases, it will directly affect the safety of the vehicle. If you really like the hub you are looking at, and there happens to be no suitable center hole size, if the size is too small, you can ream, and if the size is too large, you can choose the center hole collar provided by some manufacturers to correct.

Millions of car purchase subsidies.

The 21 Focus wheels are or 2J. Automobile wheel hub refers to the accessories used to carry the hard moment of inertia between the car and the tire, which can also be called the wheel search punching ring, steel ring, etc. The complete wheel wheel missing unit, including the car bearing, i.e. the flange, works with the tire to support the wheel signal.

The main role is to affect the size of the brake specification, as well as the choice of tire specifications, the larger the wheel hub can be put down, the larger the brake system, the wider the wheel hub can be used, the higher the performance of the widened tire.

Presentation of 21 FocusesThe manufacturer's guide price of the 2021 model of Ford Focus is 10,000 yuan, which coincides with strong competitors such as Corolla, Sylphy, and Lavida.

The 21 Focus wheels are or 2J. The wheel hub of the car refers to the hard moment of inertia used to carry the car and the tire.

can also be called rims, steel rims, etc. The complete hub unit, including the car bearings, i.e. the flanges.

Cooperate with the tires to support the wheels. The main role is to affect the size of the brake specification, as well as to judge the tire specification.

The larger the wheel, the wider the wheel, the higher the performance of the widened tire.

Presentation of 21 Focuses

The manufacturer's guide price of the 2021 model of the Ford Focus is 10,000 yuan, which is just the same price range as the Corolla.

Sylphy, Lavida.

and other strong competitors.

Coincidentally, compared with German and Japanese cars, the Focus brand is at a disadvantage, and compared with its own brands, the configuration of Focus is not rich enough, and the competitive advantage of the vehicle is not obvious.

The wheels of the '09 Ford Focus are 16 inches. The hub is the part of the wheel where the axle is installed in the center of the wheel, which is often referred to as the "rim" or "steel rim". The wheel hub is easy to get dirty, and if it is not cleaned for a long time, it may be corroded and deformed, resulting in potential safety hazards.

The differences between steel wheels and alloy wheels are as follows:

1. The main advantage of steel wheel leakage is that the manufacturing process is simple (generally using the casting process, for example, aluminum alloy wheels are generally produced by low-pressure casting process), the cost is relatively low, and the ability to resist metal fatigue is very strong;

2. The weight of the steel hub is large (the same steel material of the hub is much heavier than that of aluminum alloy material), the inertia resistance is large, the heat dissipation is also relatively poor, and it is easy to rust;

3. The alloy wheel hub has light weight, low inertia resistance, high production accuracy, small deformation and low inertia resistance when rotating at high speed, which is conducive to improving the straight-line driving performance of the car and reducing the rolling resistance of the tire, thereby reducing fuel consumption;

4. The thermal conductivity of the alloy material is about three times that of steel, and the heat dissipation is good, which can play a certain role in the thermal attenuation of the vehicle's braking system, tire and braking system.

Millions of car purchase subsidies.

There are too many brands of tires, and there are many good performance, so you need to choose the right tire for you according to your actual needs.

If you want to have better performance in all aspects, choose Michelin, Pirelli, Continental, Goodyear, Bridgestone and other first-line foreign brands, but they are more expensive.

If you want to be more economical, you can choose second-tier brands such as Chaoyang, Giti, Wanli, Huili, Linglong, Jinyu, and Road Airlines, which are very cost-effective.

What does it cost to convert 17-inch wheels to a Focus:

1. Generally speaking, the installation of a 17-inch wheel hub should be about 1000 to 1500, which is more reasonable to refer to;

2. It is not recommended to change the size of the wheels and tires of the car casually, which will affect the annual review of the car;

3. Increasing the need to match flatter tires, which reduces comfort and increases fuel consumption, I don't think it's necessary;