Contact Y460 window7 Flagship System Connect to Wi Fi 20

Hehe, this question is very simple, although you are connected to the wireless network, but you still have to log in to the Internet account to access the Internet. Just like the wireless ADSL cat at home, he also has the function of wireless Internet access, and you connect to this wireless network. Show in the connection is normal,(Remember win7 and xp system is different,win7 connection is divided into two parts of connection,one is a local connection,one is intelniet connection,your connection is only a local connection) at this time you want to go to the Internet is definitely not good,You have to log in to the ADSL account and password,Then it shows that the connection is successful,So you can go online。

Of course, if you can't connect wirelessly, you can't log in at all

Cause:Because the current system manufacturers are also ghost,So sometimes there will be problems with some drivers.,So it's best to re-drive it.。 In addition, this problem can also occur when the router is used for too long, so you need to restart the router.

Depending on your question, it feels like your wireless is already connected, whether it is automatically obtained, whether you need to configure the IP, and whether there is a problem with the DNS setting.

It's okay to drive the elves and drive the life.

It is recommended that you use the official website driver, which has been rigorously tested and is more stable.

There is no home version of the network card driver, the flagship version.

Driving sprites isn't absolutely easy either.

Lenovo's notebook wireless network generally uses Intel or Broadcom, you can check the model first, and then find the corresponding driver against the model.

Originally, most of win7 can be recognized, and it is no problem to install the driver wizard.

1. The switch of the wireless network card is not opened;

1. Check whether there is a manual mechanical switch around it, generally on the front panel, marked with a wireless symbol.

2. Press the FN + wireless signal button (one of F several to accompany the oak late) to find wireless wifi3, Lu Li to open the control board, and change the category to a small icon in the upper right corner. Open the mobile center and turn on the wireless card in the mobile center.

Second, the NIC driver is not installed well or the NIC is disabled in the device manager;

1. Press and hold win+r on the desktop to enter commands. Open the device manager, network adapter, see if there is a disabled wireless network card, if so, a red x will be displayed on the device, right-click on the device, enable it and wait for a few seconds.

2. If the wireless driver is not installed, update the driver with a wired connection.

3. Use an external wireless network card to try whether you can access the Internet normally, it can be that the wireless network card is broken, and the built-in wireless network card of the notebook purchased online is to be replaced.

This one... Haven't tried.

But you can spend a hundred and eighty dollars to buy a wireless router ah,Desktop without unlimited words plug in the network cable,The laptop must have a wireless one,I got a wireless router myself,Mine is Y450。 It is convenient, too.

It seems that the setup is very complicated, setting up a VPN or something.

Install a wireless router and you can access the Internet on both machines.

You can try to adjust the power management properties of the wireless NIC, and the specific steps are as follows:

1。If it is an XP system, right-click on the desktop "My Computer", select "Properties", click on "Hardware", click "Device Manager", you will see that there is a "Network Adapter", double-click "Network Adapter", your wireless network card name "Intel WinfiLink 5100AGN" (note that the name may be slightly different), and then double-click "5100AGN", select "Advanced", Click the drop-down button next to it in the property box, select "Power Management" (note: not ad hoc power management), and then there is a slider next to it to adjust the value, pull it to "Maximum"; Then go back to the mouse and double-click "5100agn", there is also a "power management", click on it, you will find that there is an option of "allow the computer to turn off this device to save power", please remove the small tick in front.

2。For win7 system, the principle is the same, it is also to enter the device manager, select the wireless network card attributes, and adjust the power management mode to "maximum", but the operating system interface is different, so the click steps are different.

3。The principle of this method is to adjust the power management mode of the wireless network card to the maximum value, so that the energy-saving function of the wireless network card is disabled.

4。If you think the above method is more complicated, then try to upgrade the wireless card driver (in fact, upgrade the driver, that is, the driver may change the power mode of the wireless network card).