Lenovo Y460 how to use optical drive boot to reinstall the system is not F12, but it has no effect

Lenovo Y460 can be installed in the system according to the steps below:

1.First, place the system disc into the optical drive.

2.Turn on the power and then observe the on-screen prompt to press "F2" for BIOS settings before booting the system.

3.Set the startup mode. Find the boot option, there is the first boot, generally 1st boot device, move the cursor to it, press the enter key to go in and select the item with the word ***, press the enter key to confirm.

4.Some of the key methods for moving the cursor are the arrow keys of the keyboard, and some are f5 and f6, which are prompted by the screen. Then press F10, select Yes, press Enter to confirm, and then the computer will automatically restart.

5.At this time, boot from the disc when starting, enter the installation system interface, follow the system prompts, step by step, and the installation process will be restarted many times.

Press F2 when Lenovo appears on boot and select the boot option with the left and right buttons, then find the entry with the word *** in it, select it, and use F5 F6 to move to the top. Then press F10 to save and restart, and the other way is to press esc to select *** Enter when you boot up (I often use this).

Try both, enter the BIOS first.

I also use Lenovo Y460,You restart,Press F12 when the prompt appears in the lower left corner,You can see it,But to ensure that you can press it,You can press F12 immediately when the prompt appears,The speed should be fast,Until the selection dialog box appears,Then select CD-ROM on the line。

Press F12 to power on

Press the down arrow key.

Choose the one that has cd or *** characters.

Press enter, yes, put the boot disc into the disc and drive enter.

Press F12 to boot up, and select the optical drive to boot up.

Dear Lenovo users, hello!

You need to open the first boot menu in the BIOS for Startup, where you can see the boot options for the CD and USB stick. Select the disc to boot up.

IDEA Forum.

Think Forum.

Lenovo Community.

Press F2 on boot to enter the BIOS and adjust the optical drive boot to the first item in the boot. Put in the disc and reboot.

Dear Lenovo users, hello!

Dear Lenovo users, hello!

For the problem you mentioned, it may be because of your system installation media that the CD is displayed, it is recommended that you turn on and press and hold F12 to select the option with CD to install the operating system, and apologize deeply for the inconvenience caused.

Yes. Just select the second one.

Yes. Click it and start from the disc!

That's right, that's the recorder.