When reinstalling the system, when installing Windows in the second step, the installation timeout o

If the hard drive can't perform partitioning, there should be something wrong with the hard drive.

The solution and operation steps are as follows:

Tools to prepare: U disk with Win7 PE system, computer.

1. In the first step, the computer starts from the USB flash drive and enters the installation interface, see the figure below.

2. In the second step, after completing the above steps, press "2" according to the directory prompts to enter the PE system, and then enter the next step, see the figure below.

3. In the third step, click the ghost installer on the desktop of the PE system to enter the installation system interface, and then enter the next step, as shown in the figure below.

4. Fourth, on the installation system interface, follow the steps in the figure, that is, click the "local"->partition"->from image" option in order, and then enter the next step, see the figure below.

5. In the fifth step, select the C drive as the system installation directory, and then enter the next step, see the figure below.

6. Step 6, select the ISO or GHO image file of the Win7 system, and extract the GHOST file in it, and then enter the next step, see the figure below.

7. Step 7, after completing the installation process of win7 system, the computer will be restarted as shown in the figure below, and the installed system will be successfully entered, see the figure below. The above has successfully solved the problem.

Hello, very happy to be able to your problem, you can restart the computer: when this problem occurs, it is likely that the system is installed in the error, read error or failure, at this time we can restart the computer to try to see if the correct installation can be carried out.

Registry Fix: If this problem is still the case, we can repair the registry, and when this screen appears, we immediately press the Shift+F10 shortcut key combination to bring up the DOS black window.

Then type regedit in the back, press enter.

At this time, the registry will be opened, find this path: hkey local machine system setup status childcompletion, and then change the setup value in it to 3 to confirm, and then restart to try again.

If none of the above methods work, it is likely that there is a problem with the ISO image file in your system disk or U disk, you can re-go to the online ** image file and reinstall it. Or directly use the one-click reinstall system tool to make a USB flash drive, boot disk, and reinstall the system.

Installation file issues, compatibility issues, insufficient hard disk over-provisioning, errors in Win7 installation files or storage media, CPU and memory failures can cause Win7 installation to suddenly stop responding.

The reasons are as follows: 1. Problems with installation files:

2. Compatibility issues:

Some computers are too old, and the hardware on the computer does not support win7, and there will be an error when installing it. There is no way to do this, but to change the computer. But it rarely happens.

3. The hard disk reserve space is insufficient.

Although Win7 claims to be very friendly to the hardware platform requirements, as the latest operating system, there are still certain requirements for hardware performance, especially disk space. According to Microsoft's official announcement of win7 installation minimum hardware resources, no less than 25GB of system disk space is required. If there is not enough disk space during installation, Win7 will clearly indicate the error type and automatically exit the installation.

The C drive of Win7 should be more than 50G.

For users who have an error in the installation of Win7 due to insufficient space on the system disk, you can consider using other software to expand the space of the C disk, and it is recommended to reserve more than 50G space for the system disk installed in Win7. Of course, if you are still using a hard drive under 80g, then buying a new high-capacity hard drive is the best solution.

4. Win7 installation file or storage medium error.

Today, there are many ways to install win7, in addition to the traditional optical disc installation, you can also choose U disk mobile hard disk installation and network installation. However, during installation, if the installation file is incomplete, or the storage medium where the win7 installation file is stored is wrong, there is a high chance that the win7 installation will fail.

It is easy to make mistakes with Win7 on a USB flash drive.

If you use a disc for installation, you need to check the disc for obvious scratches and check whether the disc reading ability is weakened. USB flash drives, on the other hand, need to check whether the storage media is working properly and whether there are errors in copying large-capacity files. For enterprise users who use a network share to install the network, you need to check whether there is any problem with the shared network connection and turn off the system firewall.

5. CPU and memory failures may cause Win7 installation to stop responding suddenly.

The installation of win7 was going smoothly, but it suddenly stopped responding, and there was no progress in the current interface. In some cases, Win7 may pop up a STOP prompt and abort the installation after a few minutes of silence; Some of the time it stops without any prompting. This kind of situation will be encountered by many users, generally speaking, some small bugs or sudden errors may be encountered during the installation process, just press the Ctrl+Alt+Del key to re-computer.

After the reboot, the installation can continue in many cases.

Don't install under the existing system,It can also get both systems gone,Most of the upgrades will overwrite the original system,If you choose another hard disk,The system can not be installed,Most of them are the problem of system boot,If you really want a dual system,It is recommended to install another system under PE。

Please close all anti-virus software and try again.

Hello、It is recommended to use Windows PE for installation、

Enter PE Practical NT6 for quick installation

Win7 installation needs to be carried out in MBR format, and GPT format can only be installed in Win8 and above versions. Also, make sure that your motherboard's BIOS supports UEFI and if so, turn on the feature (select enable and save to exit).

How to solve the win7 system installer prompt error? Recently, some win7 users have reported that in the process of installing the program, the error prompt of "installation error" will always pop up, resulting in the failure of the installer, how to solve it?

The steps are as follows:

1. When the win7 system pops up the prompt "the computer restarts unexpectedly or encounters an error", press the "shift+f10" key combination directly on the keyboard to open the "command", enter "cd" and press the enter key to generally return to the root directory, and the screen is displayed at this time "c: >

2. Enter CD C: Windows System32 Oobe folder, then enter the msoobe command and press enter.

3. Enter msoobe to log in to the next operation, but the system error prompt box will also appear, so don't care about it at this time.

4. Press "Ctrl+Alt+Delete" to bring up the "Taskbar", and the window can be closed when the task is over.

5、The only thing that affects the win7 system is that there is an extra user,The second is that the system input method has been restored to the factory settings。

6. Type in the corresponding information according to the on-screen instructions until the computer completes the installation of the system, when the user installs the win7 system, if we have a blue screen failure in the process of logging into the desktop, you can directly try to restart and press the F8 key to enter the system security mode, or restart the system when you successfully log in to the security mode.

Failure Analysis: Resolution:

1. Press shift+F10 to open the command window, enter the C: Windows System32 OOBE folder, enter MSOOBE and then enter MSOOBE to enter the next operation, but the error prompt is still there, ignore the prompts on the screen and enter the corresponding information until the system installation is completed. After installation, there is no problem with the win7 system.

Do not dos commands as described below

1. Pressing shift+f10 will open the command window, enter cd and press the enter key to return to the root directory, and the screen will display c: "".

2. Next, enter CD Windows System32 Oobe

3. Then type: msoobe or.

4. After that, the installation interface will pop up and follow the prompts to the next step.

It has little to do with the system.

You try to reinstall it.

If this is the case, change the system image.

What should I do if the computer is like this, ask you.

Have you done it, please? The same goes for my computer.

What should I do if the system cannot find the specified path after input?

1. When the above prompt appears, press "shift+f10" to open the command window, enter cd and press the enter key to return to the root directory, and the screen will display c: >

2. Enter C: Windows System32 Oobe folder, enter the msoobe command and press enter.

3. Then enter msoobe to enter the next step, but the error prompt is still there, don't pay attention to it.

4. Press Ctrl+Alt+Delete to bring up the taskbar, and end the task to close the window.

5、The only impact on the system is to establish one more user,There is also the input method is restored to the factory settings。

6. Enter the corresponding information according to the on-screen prompts until the installation of the system is completed, after the installation of the win7 system, if the blue screen occurs in the process of entering the desktop, you can restart and press F8 to log in to the safe mode, and then restart to enter the system after successfully logging in to the safe mode.

Workaround:

When the system ejects"The Windows installation cannot continue"When reminding, press the shortcut key "shift+f10" directly on the keyboard to open the "command" box, and then enter "cd" and press the enter key to generally return to the root directory, at this time the screen is displayed "c: >

Then enter the C: Windows System32 Oobe folder, enter the msoobe command and click enter.

Then type msoobe to proceed to the next step.

Then use the shortcut key "Ctrl+Alt+Delete" to open the "Taskbar", so that you can close the window when you end the task.

Finally, according to the corresponding information on the screen until the computer completes the installation of the system, when the user has installed the system, if the blue screen failure occurs in the process of logging into the desktop, you can directly try to restart and press the F8 key to enter the system security mode, or when we successfully log in to the security mode and then restart the login system.