The computer model is T420i and the system is win7, how to change the fingerprint password so that t

Hello! It is recommended that you reinstall the fingerprint software:

Create an account with administrator privileges:

1. Click "Start" in the lower left corner and find "Control Panel" on the right.

2. Click on "User Account & Family Safety".

3. Click on "User Account".

4. Click "Manage Other Accounts" below.

5. After opening the "Manage Account" interface, click "Create a new account" at the bottom left and click on it.

6. After opening the "Create a new account" interface, you can enter the name of the account you want to create in the white box in the middle, for example: lenovo, and the type can be selected: "Standard Account" and "Administrator".

7. After the input is completed, click "Create Account".

8. At this time, there will be an additional account named lenovo in the "Management Account", which is the new account just created.

9. Click "Lenovo User" to open the management settings interface of "Lenovo Account", where you can set some settings for it, such as "Create Password", etc.

Hope it helps, I wish you a great time!

1. Set the boot password first: press Ctrl+Alt+Del--> to change the password.

2. Under the control panel, open Lenovo

fingerprint

manager (also known as fingerprint management) and follow the prompts:

Enter your Windows password to verify your identity.

Go to fingerprint registration, select one finger with your mouse, and swipe your fingerprint on the fingerprint reader, one at a time, until the fill bar fills.

Right-click on my computer to manage local users and groups of users on the right to the administrator's account on the right right-click to set a password on it!

Use someone else's computer to do a PE USB disk boot, insert the USB disk to start your computer, and after entering PE, there is a function that is to delete the login password!

1. Right-click on the computer, select Manage--Local Users and Groups--Users, right-click on the administrator user, select Rename, and rename to administrator1

2. Create a new administrator, the password is the same as administrator1, log in with administrator after logging out, enter fingerprint, and export fingerprint configuration.

3. After logging out, log in with administrator1, delete the administrator user, and rename administrator1 as administrator

4. After logging out, log in with the administrator user and import the fingerprint file.

Method 2: 1Although there is a problem with the above method, that is, after turning on the computer with a fingerprint, you have to brush your fingerprint again when you enter the system, and after testing, you have found a way to completely solve this problem:

2.I installed XP 32-bit first, and after installation, enable the administrator user in Management--Local Users and Groups--Users, disable the user created when installing the system, register the fingerprint with Administrator, and then export the fingerprint data.

3.Install win7 64-bit, after installation, enable the administrator user in management--local users and groups--users, disable the user created when installing the system, restart the system, log in with administrator, import the fingerprint data of the first step, you can perfectly solve the problem of win7 registered fingerprint.

Dear Lenovo users, the information queried, The administrator account built into the Windows 7 system does not support Microsoft's fingerprint recognition. You try to create a new account with administrator privileges to use it.

The fingerprint login software of the machine prompts an error message for E7210005.

If the above solutions do not solve your problem, you are welcome to use the official WeChat of Lenovo service ** consultation, click on friends on WeChat on the mobile phone, add friends, search for numbers, enter "Lenovo service", add Lenovo service official WeChat, you can consult anytime and anywhere, service time 9:00-21:00.

1 Open the Start-> Control Panel.

2 Find the User Account option in the Control Panel and open it.

3 After opening, you will see the following interface, see here to know how to operate, it doesn't matter if you don't know, and then you will explain in detail.

4 If you want to change your password, click Change Password.

5. Enter the password you want to change in the marked area.

6. If you are afraid of forgetting your password, you can also set a password prompt.

7 If you want to change your username, click Change Account Name.

8. Enter the name you want to change to.

User Add and Change Password Tutorial, Windows System Computer Account Username Modification and Deletion Method.

They all said to change the password, deleting the password is to delete all the passwords in the place where the password is changed, leave nothing, just save and exit.

You can try switching users, see how to log in with administrator.

If you can't do it anymore, you can only crack the password, find a ghost disc.

You can also right-click on My Computer, Computer Management, Local Users and Groups, and Users to set a password

Press F8 to enter safe mode and modify your account information.

If you forget the old password, reinstall the system, (it seems that you can change it when you enter safe mode, but you don't understand it).

Most system disks or utility disks come with password change options for Windows and other systems, buy one and try it.

Go to Home - Control Panel - User Accounts.

In the Control Panel, select the user and change the password.

Brush the system, that's all.

You can simply rename the default Super Administrator account as follows:

1. Click Start, click Run, Enter, Click OK;

2. Click Computer Configuration - Windows Settings --- Security Settings - Local Policies - Security Options;

3. Double-click the account on the right: rename the system administrator account;

4. Enter a new name in the pop-up window and click OK.

Here's how to fix it:

1.Hold down the Windows key + R key on your keyboard to open the run dialog box, and type control userpasswords2 to open the account advanced control.

2.Select the built-in administrator account, click Properties, and change the username to admin

3.Create a new account called administrator, the password is the same as the original user's password, and set it as an administrator user.

The password must be the same as the original user's password!

4.Log out of your current account and log in to the new administrator

5.Enter your fingerprint in the administrator directory and log out the current user.

6.Log in to the built-in admin account and run the following command to delete the following administrator user.

7.Double-click the account admin (after changing the name) and change the username back to administrator in the "Properties" field (it must be exactly the same as the username you just created), log out and log in again.

8.Log out, select fingerprint login, swipe fingerprint to log in again, it means that it has been successful, if not, restart the computer.

9.If you want to add a fingerprint, you must repeat the steps above.

Because win7 can't set fingerprint login with the default admin account. So you can try logging in with a different user.

Start Menu - > All Programs - > thinkvantage - > Fingerprint Software - > user registration and follow the instructions step by step.

Once you're on the login screen, hold down Ctrl+Alt and quickly press the Delete key twice. Enter the super administrator login interface, enter the administrator account, enter the password if you have a password, and let it be empty if you don't have a password. OK, enter the system, and then right-click My Computer - Management - Local Users and Groups - Users - Select the account that your fingerprint does not recognize - Right-click - Set password - OK.

To change your fingerprint, follow the steps below:

1. Select the start button in the lower left corner and click to enter;

2. Course selection control panel, click to enter:

3. Select System & Security, and click Enter:

4. Select Lenovo - Fingerprint Reader and click to enter;

5. In the thinkvantage fingerprint software, click on the existing entered fingerprint, the system will pop up whether to delete or not, select delete, and then click again (click which finger to enter which finger fingerprint), the system will pop up the registration, at this time scan the fingerprint reader until it is 100% completed.

6. Click OK after the scan is completed.

This is the case myself, I first turned on the computer and then re-created an administrator account, then used this account to log in, and finally changed the password of the previous administrator account when this administrator account logged in,!! That's fine

Right-click Computer. [Management]. Local Users and Groups. 【administrator】。Right-click. Set a password. If you don't set a password, it's empty.

After the fingerprint is logged in, it will be in the administrator state.

Create another administrator account.

There is a newly established administrator account logged in.

Reset the original user's password.

Bring up the task manager, click Change Password to enter the interface, select Fingerprint Verification to change the password, and you can change the password directly. It's not as complicated as the above, and managing it with a computer group of users will result in the loss of some information.

After entering the system with your fingerprint, select Local Users and Groups in Computer Management, select User Point to set password, and you can directly replace the original password.

Control Panel - Systems & Security - Management Tools - Computer Management - Local Users & Groups - Users

Find your current username - right-click on the username you need to modify - set a password.

I won't say much about the rest, I hope it solves your problem.

My computer right-click on the attributes, local users and groups, administrator right-click to set the password, and set it again.

Boot with a system CD, and there is an option to change the administrator password on the system disk.

There's a software that seems to be able to view the administrator password through the fingerprint It seems to be w7ps2009build6238-32bit, you search for it and try it, but I don't know if you want the administrator password when you install it again.

1. Win7 login password forgot, the system can't enter, and the display password is incorrect.

2. At this time, you need to reset the password, click on the interface to reset the password.

3. After confirmation, the following interface will appear, enter a new password, then confirm the password again, enter the password prompt, and finally click Next.

4. Then on the new interface, click Finish below, and you can use the new login password to enter the system.

5. Finally, the system prompts that the password has been changed successfully, click OK.

1. First press win+r to open the running window, enter, and click OK.

2. Then in the console window that opens, click on the "File" option "Add Remove Snap-in".

3. After entering, select the option of "Local Users and Groups" and click the Add button.

4. Click the Done button in the new window that opens.

5. Go back to the console and double-click the option to open local users and groups.

6. Find the user option, right-click and select "Set Password" to enter and change the password, no original password required.

Quickly change the Windows login password of the computer, and you can change it without the original password.

You find one,PE system in the deep mountain red leaves toolbox,Just run it directly,There's a password cracking tool in it,Click directly on the windows final password query,A dialogue window will pop up,About a minute or so, he will show the password of administr,Or you try other tools inside。

This situation is relatively simple to solve, first enter " in the search box in the start menu, or press and hold win+r to open the run window and enter", and click OK to enter the control console. Open File > Add & Remove snap-in, find Local Users & Groups in the available snap-ins on the left, click Add > Finish, and then click OK. For local users and groups in the root node of the console, select "Users", right-click on the username on the right, and "Set Password", no need to enter the original password.

Hope it helps.