BIG BOUNTY MY COMPUTER HAS TURNED OFF WINDOWS AUTOMATIC UPDATES, WILL IT STILL UPDATE?

The piracy system turned off automatic updates. If there is any patch to be patched on the computer. 360 Security Guard, Kingsoft Cleanup Expert, are all good patching tools. If you turn off automatic updates, you go to the task manager and end the program with wual or something

If it is genuine, it is recommended to update it automatically

The files in your C drive are indeed backup files automatically generated by Kaba.,It has nothing to do with your system.,These things can be deleted.。。 If you install Kaba, it will run slowly naturally. Kabazam has a large memory.

Disk Cleanup is very slow.,It's the slowest with Windows.,Optimization Master is also this tool.,It's not much faster.。。

The slow system is a characteristic of the Windows system, and the longer you use it, the slower it becomes, so you should back up the system frequently. It will be restored once in about 2 months!

About the automatic update of win.

Before updating, you need to determine if your win is genuine.

If not. It is not advisable to update.

If yes, then it doesn't matter.

2 methods of renewal.

It's better to go to the next Qihoo 360

No, the file with the $ symbol in the system is a backup of the file before the update of the system, and it can be deleted, because the system really went wrong, and it is better to redo it than to fix it. Hehe.

The reason why there are still updates is that your update is not fully installed, you wait patiently, and when the installation is all over, it will not be there.

Normally, if you turn off the system update, it won't update, but it's best to set up an update prompt, which is beneficial.

After deletion, it is recommended that you do a system disk defragmentation cleanup, although it is a little slower, but it is still very costly, because it will bring you faster speed and efficiency. It's original. Hehehe).

It will be safer to update the system.,If you don't want to update, just turn off the automatic update.,Like $ntuninstallkb927891$, you can delete it.,It's not necessary to keep it.,It takes up too much space It is recommended to update with 360 security guards.,So it won't be discovered by Microsoft.,To。

If you turn off automatic updates, you will definitely not be updated automatically, but I personally don't think it's wise.

The system is slow, it may be a virus, as long as you have 30% of the remaining space on the C drive, even if it is 20%, it will not affect your speed.

Use 360 Guard to scan rogue software and kill Trojans.

Those garbage can be cleaned up with an all-round assistant.

Delete it, it's useless.

Microsoft has an update to verify whether the system is genuine, just don't install that update.

There are similar files in the Kaba driver directory that are very large, delete them directly.

If the disk cleanup effect is not good, it is better to reinstall the full disk format.

There is no need to update, the more you update the C disk file, the more the machine will naturally slow down, $ntuninstallkb 927891 The file is automatically generated by the system as long as the system is running, it does not take up space and memory, so there is no need to delete it.

If you want to update, use QQ or 360

Being slow is not one of those problems. Use the Optimizer to sweep away the trash. The speed will be faster. (Your system hasn't been reinstalled for a long time).

Because after we turn off the automatic update function of the system, the system is set to "restart the service" when it fails for the first time, and the automatic update function will be turned on again, so every time our computer turns off the automatic update, the system detects that it can be updated but the update fails, and the automatic update function will be automatically turned on.

1. Because the home version of the system does not have a group policy to operate, the automatic update function can only be turned off by disabling the system service. Press the Windows key + R key to open the run, and type "Open Service." 2. Find the "Windows Update" option, right-click and select [Properties].

3. Change the startup type of Windows Update to [Disable]. 4. Then click Restore, change "First Failure" to "No Operation", set the number of days for reset failure counting, and finally click OK, so that you can completely disable the automatic change.

The above is the reason why the system will update after the automatic update is turned off.

XP, right-click on My Computer > > > > > > > > > > > > >

Then Manage Tools >> Services, find Windows Update deactivated and disabled.

Win7: Control Panel Windows Update Change Setting: Off.

Then Manage Tools >> Services, find Windows Update deactivated and disabled.

As long as it is software, there are vulnerabilities, Windows Update is the thing called Windows Update in the computer, which can correct the faults found after the product is launched, ** new added functions, and update Windows.

Of course, it is generally recommended to turn off Windows Update, and then use third-party software to patch it, many software has it, such as 360, Kingsoft Guardian and so on. Although many people say that there is no problem with the genuine system turning on windows automatic update, while the pirated system is prone to problems, as far as I know, many computers still have a black screen after turning on the automatic update of the genuine system. So I recommend shutting it down and patching it with third-party software.

How to close: In Start - All Programs - Windows Update, there is an option to change the settings, which has a drop-down box, click on the corresponding option and then confirm to close.

It won't have a big impact if the general user closes it.,It's recommended to update the patch.,If it's genuine!

How to close: Control Panel - System & Security - Windows Update - Close.

If you have third-party software such as 360, you also need to turn off 360's automatic updates.

It's best to turn off the automatic update that comes with windows.,We're generally not installed genuine.,There's no need to turn on automatic update.,After the update, it will cause an unknown error.,Close the method-right-click my computer-properties-auto-update-close。

After the automatic update is turned off, the Windows system will not update the program by itself, and it generally will not have any effect, if you want to turn it off, you can turn off the update by finding windows update in the control panel.

The system will automatically apply the Microsoft black screen patch to your computer.

Just use 360 Security Guard.

He won't put your useless patches on it.

If you are a genuine machine, it will be automatically updated directly.

Don't check anything when updating.,Click Close.,Check and never prompt me.,Just OK pull.。 Don't update the pirated machine, the computer will kill you.

Control Panel, Windows Update, Change Settings.

1. Find the small triangle and small flag in the lower right corner of the taskbar, and open the operation center (if there is that small flag in the taskbar, just click on it).

3. After entering the window, find Windows Update and change the settings.

4. Select Never Check in the down menu of important updates to confirm exit.

Right-click "My Computer" -- click "Auto-Update" -- select "Turn Off Auto-Update" -- OK (I use XP.,I guess it should be similar.,Don't laugh at me.。

About how to turn off win10 automatic update There are two ways to disable the Windows update service, and the other is to disable the update through Group Policy. However, some netizens said that it is unreliable to turn off the windows update service directly, because sometimes it is automatically turned on inexplicably.

Set the network to "Metered Connections".

The first is the most extreme and thorough, which is the use of "metered connections".

This is provided by Microsoft for users with limited traffic**, since you want to better control the amount of data used, of course, you can't upgrade as you want.

Updates are suspended. First of all, it's the easiest, just click Change usage time at the bottom of the update screen to set a working time without interruptions. There are some details to be aware of here, though, as the Pro version can set an 18-hour long time window, while the Home version is only 12 hours long.

But it's enough, who would keep working for so long? 9:00-19:00 is suitable for many users.

And if you don't think the current update is appropriate, then you can simply postpone it by 1 week, which is 7 days. This is also very simple, you can directly choose to pause the update in the update, that is, it will take effect immediately.

Most of the results are due to the wrong way to turn off automatic updates, or the result is that the settings are not saved.

We recommend that you perform the following operations:

Tool: win10

Methods and Steps:

Method 1: 1. Right-click on "This Computer" and select "Properties".

2. Click "Windows Update".

3. Click "Change Settings".

4. Select "Turn off automatic update" in the drop-down menu and click OK.

Method 2: 1. Press the key combination win+r on the keyboard to open and run, and enter " Click OK.

2. Find and click on the "WindowsUpdate" service.

3. Select "Disable" and click Apply OK.

Right-click the Microsoft button in the lower left corner, find "Run" You can also use the win+r of the keyboard to open the run.

2. Enter " in the Run area and click OK.

3. In the pop-up service, find "Windows Update".

4. Once found, double-click, select "Disable" for Startup Type, and then click Apply.

6. If the computer needs to be updated, you can go back to the fourth step and adjust it to "Automatic".

The above ones are more troublesome, update the easy way!

Open Task Manager and right-click the toolbar"Task Manager"Or shortcut Ctrl+Alt+Del to open the service, find Windows Update and select Disable!!

The front is full of replies from misguided children.,Windows update-related options,Choose to pause updates.,And it can only be paused for a maximum of 35 days.,After that, automatic updates will be resumed.,And it stinks and doesn't want to automatically update in the middle of the night.。 This is a typical rogue protocol, and staying away from Windows 8 and 10 and above is the best way to go.

On the desktop, right-click on My Computer -- Manage -- Services & Applications -- Services -- Find Security Center -- Close and Disable it.

Let the win10 system not automatically update the driver The first step of the operation method is to right-click the computer icon on the desktop, and click "Properties" in the menu.

Step 2: On the system interface, click "Advanced System Settings" on the left side.

Step 3: In the System Properties dialog box, click "Device Installation Settings" under the Device Installation Settings item.

Step 4、In the device installation settings interface, first click to select "No, let me choose what to do", and then different options will appear below, cancel the default settings, click to select "Never install driver software from Windows update", click on the bottom "Save Changes" on it!

The above is a small trick to prohibit the win10 system from automatically updating the driver, after completing the above operations, the win10 system will not automatically update the driver in the background, and it can also avoid the phenomenon of the system black screen caused by this.

The specific steps to completely disable and turn off Windows automatic updates are as follows:

1. Right-click and select Properties. Opens the System Properties dialog box. As shown in the figure below. In the system properties that open, click Control Panel in the upper-left corner.

2. In the control panel interface of your computer, click "System and Security".

3. In the pop-up dialog box, click "Windows Update" to enable or disable automatic updates.

4. In the Change Settings dialog box that pops up, select "Turn off automatic updates" in the drop-down menu of important updates. At this point, the setting of turning off win10 automatic update is complete.

The materials we need to prepare are: computer,

1. First of all, we open the computer, right-click on this computer on the desktop, and select to open "Manage".

2. Then we click "Windows Update" in the pop-up window to open the service page.

3. Then we click to open "Startup Type" in the pop-up window and select "Disable".

4. After that, we click to open the "First Failure" in the recovery, click to select "No Operation", and then press Enter to confirm.