Do imported luxury cars often have problems?

Cars are assembled with many components, many of which involve electrical control modules, sensors and actuators. This places very high demands on power supply, such as batteries. Once the vehicle is not driven for a long time, parking in one place for a long time will cause insufficient power supply of the vehicle and generate a lot of alarms.

In this regard, it shows that the more high-end the high-end car, the higher the driving requirements for the vehicle. Of course, the driving style and driving environment are also high, and it is necessary to ensure that the vehicle is maintained in place and the "appetite" is suitable under the premise of providing comfort and safety.

The engine and transmission system involved are now more and more electronically controlled, and the work between them must be coordinated with each other, and if any small component has a problem, the coordination of safety control will be controlled in some aspects.

As for the big problem with the engine, it is unfair, the fuel requirements of a good car are higher than that of ordinary vehicles, and a bad oil product will also cause the engine to be unsuitable for the "appetite". Therefore, while providing comfort and safety for drivers or passengers, luxury cars must be able to maintain cars.

One is that the use environment is not suitable (such as oil quality problems, which cannot be blamed on the vehicle manufacturer), and the second is that the warranty is inconvenient, and the more it drags on, the worse it is.

It's hard to say, there are many cars in the BMW 7 Series that have had transmission problems, and the car that is running at high speed suddenly slows down and then can't run. Some cars will also have different problems due to environmental oil and other reasons, but this is only an individual case.

It's impossible, imported cars generally don't have any problems, and if they do, they must be a big problem

I remember a teacher who told us when I was in school that in foreign countries, people like the goods that come out on Wednesdays. Why? Worker week.

One and two intoxicated in the weekend activities did not slow down, week.

On April and Friday, we were thinking about this weekend's activities, and it was only on Wednesday that the workers really calmed down to work, so that any commodity would be a little problematic as long as it passed through people's hands. There is also the lack of domestic maintenance, including car owners and repair companies. The other is the problem of oil products, which are all trying to sell fake or buy fake at a low price.

You should measure the filament resistance, usually within 1 of the magnetron filament resistance. It is not because of it that the high-voltage fuse is burned, and the high-voltage fuse is generally not burned after it is replaced. The magnetron is a vacuum device, and once the vacuum is broken, everything else is useless.

That's why measuring everything just doesn't work. Some parameters of the microwave oven are shown to you, I hope it will help you: magnetron filament resistance within 1, filament voltage 3?

2v；The primary level of the high-voltage transformer is 220V, and the winding resistance is 2 3. The secondary high-voltage winding voltage is 2000V, and the winding resistance is 80 100; Filament winding 3?2～3?

4V, winding resistance within 1; The winding resistance of the turntable motor is 10 20k, and the winding resistance of the fan motor is 200 300.

I guess friends who have used it or really understand it probably don't come here very often, hehe.

I've sold imported cars for a year, and I may still have some say, the Touareg is a high-end off-road vehicle of Volkswagen, there is no problem with quality, of course, there is no absolute thing in the world, just relatively speaking, the quality is superior. Moreover, if you buy from an authorized dealer of Volkswagen, the after-sales service is also guaranteed.

The performance is very good, and the failure rate that occurs is also very low.

How could something go wrong with such a good car. The performance is exceptional.

One of the benefits of a good car is its low failure rate!

It depends on the brand, like domestic cars, such as BYD, there are many problems. Medium and high-end cars, such as joint venture cars, imported cars will not often have big or minor problems.

Theoretically, yes, but it's not comparable.

The car has run 10w kilometers without maintenance, and it will be prone to many small problems.

Regular maintenance is required.

The car is generally 5000 kilometers of maintenance, only refers to the lubrication system, that is, to change the oil, oil filter, gasoline filter and air filter, 5000 kilometers of ring oil, because it has almost reached the limit of use, lubrication and viscosity have decreased, if not replaced, the engine can not be lubricated, affecting the service life of the engine, do not add those unnecessary additives, wear resistant agents, etc. Note that when you change the oil, you must change the oil filter, if you don't change the oil filter in order to save money, the performance and effect of the oil will be greatly reduced.

In addition, the consumable parts of the vehicle should also be replaced on time, such as: brake pads, wiper blades, tires, belts, batteries, brake fluid, etc.; Regularly inspect the oil circuit system of each electrical appliance! Some parts such as:

Brake pads, its wear is determined according to the owner's driving habits and the road section run, the time of wear varies, varies from person to person, such as: often run downhill, then you have to brake all the way, so the wear of the brake pads will be fast! So check the condition of your vehicle often!

Deal with it at any time to prevent inconvenience caused by vehicle breakdowns!

If you take proper care and maintain it regularly, you won't.

Today's car technology is mature, and there are few basic problems with driving 100,000 kilometers. It is also related to the following factors.

1. Personal driving habits, for example, some people do not slow down when they pass the deceleration bar, so that there must be problems with the car for a long time;

2. In the road conditions of frequent driving, the car with good road conditions in the city usually has fewer problems than the car used in such conditions in mountainous areas;

3. Vehicle maintenance, on-time maintenance is very important;

4. The quality of the car, usually the joint venture car and the imported car are less than the domestic small problems.

If the maintenance is timely and there has been no accident for about 100,000 kilometers, it should be the best time for the car.

The 05 Accord is now 11 years old, and the 6-year-old car has driven 110,000 kilometers, looking at the numbers (if the odometer has not been changed) should be used by the original owner to commute to work.

Ma 3 is still a good choice, if you can buy a new car or it is recommended to buy a new car, domestic cars after 100,000 kilometers of problems have come out, big and small will have.

In the four years before China's accession to the WTO to adjust tariffs on imported cars, China's automobile import tariffs.

From 70 to 80 to 30, the average annual tax reduction is about 10.

Last year, it dropped from 30 to 28 and then to 25 in the middle of the year. Now far from China's tariff rate on imported cars.

A full year has passed since the last downward adjustment, but the prices of imported cars on the market are still the same as those in the foreign market, mainly low-priced models, and luxury imported cars** are far from being in line with foreign countries.

Judging from the current market reaction, most of the models that have been affected by tariffs on imported cars have fallen significantly are concentrated in Korean brands. It is reported that the current price of Ophiles is 10,000 yuan, and the model is 10,000 yuan, and the sales of these two models in South Korea are 34.6 million won and 38.8 million won respectively, equivalent to about 290,000 yuan and 330,000 yuan. At the same time, the lowest price of imported Hyundai Meijia, a multi-functional vehicle with high cost performance, is only 10,000 yuan in Shanghai, which is almost lower than that of domestic models of the same level.

For example, the manufacturer's suggested retail price of Lexus GS430 in the United States is 10,000 US dollars, equivalent to about 400,000 yuan, and the current ** in China is about 740,000 yuan. The price of this model was only 740,000 yuan at the beginning of 2005, and it has undergone tariff reductions and RMB appreciation.

After that, there was almost no change in the selling price. In addition, the BMW M6 in Germany is 10,000 euros, equivalent to about 1.1 million yuan, and nearly 1.8 million yuan in China.

Car owners who come to buy luxury cars almost have little meaning to **, they pay more attention to after-sales service and pick-up time. A dealer in charge of an imported luxury brand for many years said, "The higher the car price, the lower the buyer's sensitivity to **." According to the analysis of industry insiders, it is precisely because the price will not have a direct impact on sales that the situation that luxury brands with high prices are unwilling to reduce prices.

For the problem that the luxury brands in the imported car market are higher than those abroad, China's first development research center.

The relevant person in charge of the industrial economic research department believes that the implementation of the international market.

As more luxury brands enter China, the best at home and abroad will not be limited to mid-range brands, and the water of luxury cars will be further squeezed out. Although Korean imported cars have the advantage of relatively low transportation costs, it is not excluded that some European, American and Japanese luxury brands may maintain the original price to obtain higher profits after the tariff reduction.

15%, and now there is a large displacement tax that must be added to more than one model.

1.Importation refers to the purchase of raw materials, products, and services from non-residents for production or consumption. Imported cars are assembled abroad, usually by sea. Foreign famous cars produced in China are not considered imported cars.

2.Usually there are two kinds of famous cars in China, one is dependent on imports, which is not only troublesome to transport, high freight, but also very high taxes, which is why imported cars are expensive; Another production mode in which foreign-produced parts are assembled in China, referred to as SKD in English, but it is also calculated according to domestic cars.

3.At present, imported cars in China can be divided into two categories: one is imported into China by car dealers through international channels, non-Chinese models, these non-Chinese models and Chinese cars are actually produced by the same manufacturer, but its configuration and specifications are different.

4.Parallel imported automobiles: refers to automobiles purchased directly from overseas markets through professional channels and introduced into the Chinese market for sale.

Due to the different import places, they can be divided into "American standard cars" and "Middle Eastern version cars" to distinguish them from "Chinese cars" sold through traditional channels. The other is the medium-sized model sold in the 4S store.

Here's how to tell if a car is an imported car:

First, from the perspective of appearance, if you understand the brand and see those with very fine workmanship, very harmonious shape, and very soft lines, it is very likely to be imported cars, and this still has some experience.

Second, from the perspective of the sub-brand of the car, if you just look at the whole line of brands such as Volkswagen and Audi, you can't see which one is an imported car, but through the sub-brands, such as A4 and TT, you can see that TT is an imported car, because there is no domestic production;

Third, some brands do not have factories in China, and all of them are imported cars, such as Renault, which can also be seen by looking at this.

Fourth, the rear of domestic cars has Chinese signs. In addition to the Chinese logo on the rear of the car, it can also be seen from the frame number, that is, the 17-digit code. As long as the letter at the beginning is not L, it is an imported car, which is the most accurate.

The frame number is in the lower left corner of the front windshield and can be seen from the outside of the car. For example, Subaru's frame number is: JF1SH52F89G071375, and the initial letter "J" means that the manufacturer is Japan.

Looking at the VIN number of the car, the ones that start with L are all domestic, the ones that start with LB are joint ventures, and the others that start with are imported.

BMW or BMW Brilliance...

1. Auto parts supplier.

The joint venture car is a foreign brand, but the car is produced in China, only the appearance is the same as that of foreign countries, so the internal configuration of the engine and other accessories are also produced in China. The design, production and assembly of imported cars are completed abroad, and the quality is produced in accordance with the global unified standards, and the quality is often better than that of the joint venture.

2. The "Chinese characteristics" of the joint venture car

Foreign brands will "reduce" after entering China, whether it is bumpers, anti-collision beams, daytime running lights, ESP and other configurations, they will be reduced to varying degrees. After these cars are reduced, it will not only affect the safety of the vehicle, but also affect the handling and ride feeling of a car. Therefore, in this regard, the joint venture car is much worse than the imported model.

3. Richer style configuration.

Being able to buy overseas models that are not available in China is also an advantage of parallel imports. In general, in order to conform to the positioning strategy of the Chinese market, automakers will make certain adjustments and modifications after importing overseas models into China. Parallel imported cars are directly imported from North America, the Middle East and other regions, and the model is not necessarily the same as that of medium-sized cars.

Joint venture cars, such as the Mercedes-Benz GL350, do not sell the diesel version in the Mercedes-Benz 4S stores in China, and the diesel version can be purchased through parallel imports.

4. Advantages.

Parallel imported cars bypass the sales links such as general dealers, regional dealers, and 4S stores, eliminating many intermediate links. In addition, the pricing of parallel import car dealers is not restricted by the manufacturer, and it is relatively free, so there are greater discounts in the market, and the parallel import car is usually 10% or 20% lower than the Chinese joint venture car.

Joint venture cars and imported cars are different in terms of parts, quality, core technology, etc.

Detailed differences: 1. The best supplier of parts.

Joint venture vehicles refer to finished products produced in China by foreign brands. Even if it is made in China's products, it has applied the "tricks" of foreign brands in terms of design, technology, production line, etc.

In addition, many parts are made from abroad. In fact, the parts of the purely imported models are also produced from different factories in different countries, and the quality is of course world-class.

2. Quality process.

In most people's minds, the quality of imported cars is definitely higher than that of joint venture cars. At present, the production processes, tools and error-proofing measures used by domestic automobile manufacturers are also internationally standardized, and the quality control process is also complete. Therefore, the quality and craftsmanship of the joint venture car is not necessarily inferior to that of the imported car.

3. Core technology.

The engine, chassis, gearbox, etc., make up the core components and technologies of a vehicle. Many people even think that the current domestic joint venture car companies are assembled with parts. Actually, this idea is one-sided.

Because the production of domestic joint venture car companies is step-by-step, stamping, welding, painting, ** and other steps are interlocking. Some of the most joint venture car companies in China, also have their own engine, transmission factories, etc., the introduction of foreign brand technology, therefore, the core technology will not be too bad.

4. The "Chinese characteristics" of the joint venture car

As we all know, after foreign brands enter China, bumpers, daytime running lights, ESP and other configurations will inevitably be "reduced". However, it can be assured that even if the vehicle is reduced, the safety, handling and ride feel of the vehicle can still be guaranteed. Therefore, the joint venture car with "Chinese characteristics" is not much inferior to the imported model.